Question about Zip Kitchen Appliances - Others

Open Question

Zip model 829 deep fryer won't heat oil - Zip Kitchen Appliances - Others

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: WOlfgang Puck Deep Fryer 1500 watts power cord

Hi - The 1700 watt fryer uses a magnetic release cord set type TA 35 P. If your unit says "use only with TA HSING CORD SET TYPE TA 35P, It should work.

Posted on Jan 25, 2008

  • 77 Answers

SOURCE: DEEP FRYER WONT HEAT

have you tried taking out all of the oil and washing it realy good I know that mine wasnt working and thats what i did and it started heating up again

Posted on Feb 19, 2008

burzerko
  • 254 Answers

SOURCE: using peanut oil in GE deep fat fryer

Peanut oil contains oxcylic acid and could cause premature wear on your fryer.

Posted on Jul 01, 2008

SOURCE: Deep fryer not working

May Blow Your Fuse Replace the fuse

Posted on Jul 18, 2008

  • 2 Answers

SOURCE: my bravetti dep fryer F1063B wont heat up

In the back of the unit there is a recessed reset switch(red) Depress it until it clicks.

Posted on Mar 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Deep fryer won't melt. or warm up the oil


Faulty switch or heating element replace the faulty part if possible or replace the fryer.

Mar 03, 2016 | Vulcan Kitchen Appliances - Others

1 Answer

How to remove heating element


In order to remove the heating element of a Cuisinart deep fryer you need to do the following:

1. Unplug the fryer.
2. Tip the fryer and put the oil into a container.
3. Put the fryer on its side, with the open top over the sink and a bowl in the sink beneath it. Leave it this way so most of the rest of the oil can drain.
4. Wipe the inside of the fryer with a paper towel.
5. Put several layers of newspaper on the counter and stand the electric deep fryer upside down on top of the paper. You will see that there are rubber feet under the base held in by screws.
6. Remove the feet and screws and you will be able to take off the base to expose the electrical workings inside.
7. Locate the heating element which has wires leading to it. Start by removing the wires leading to it and then loosen up and remove the heating element itself.

May 24, 2015 | Cuisinart Kitchen Appliances - Others

1 Answer

Lost my cord to my deep fryer modle k4318 where can I find a replacement?


MODEL K4318
the oil does heats up to 190 degrees(according to the thermmometer i stuck in the oil) and it does not get any hotter!!!!!!!!!!!!!!!

Jul 12, 2009 | Euro-Pro Kitchen Appliances - Others

1 Answer

Wells deep fryer won't heat


Is the oil coll and it still doesnt reset?If so the hi limit is bad,which is the reset.If you gain acess to it you will see 2 wires.Connect these wires and it should heat.HOWEVER this is a saftey device that prevents the oil from getting too hot and catching on fire.

Mar 22, 2009 | Wells F-686 Deep Fryer

1 Answer

Light comes on but oil does not heat


check timer or power button,level oil.

Feb 05, 2009 | Presto 05442 CoolDaddy Deep Fryer

1 Answer

Bravetti Deep Fryer-Model EP65


I have Bravetti Platinum Pro Deep Fryer model EP65 but my heating element was damaged, I debating to sell parts or try to find a new heating element.

Apr 01, 2008 | Bravetti EP4305FS Deep Fryer

2 Answers

DEEP FRYER WONT HEAT


have you tried taking out all of the oil and washing it realy good I know that mine wasnt working and thats what i did and it started heating up again

Feb 18, 2008 | Bravetti EP4305FS Deep Fryer

1 Answer

Deep fryer wont heat up


I have the exact same deep fryer and it was doing the same thing if you take out all of the oil and clean it realy good it should work again

Jan 11, 2008 | Black & Decker DF250 Cool Touch Deep Fryer

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zip Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

683 Answers

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75147 Answers

Are you a Zip Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...