How can i remove the pyp mode from my samsung st72 camera.

may be dust in the ON/OFF button use CRC cleaner spray around the button, press/release several times switch will work

I would removed the battery, wait at least 10 minutes for the camera to reset , insert back the battery and power up the camera.

Yoe better put this question to Walmart. we don't sell, we don't exchange and we don't have any return policy. We only try to answer (most technical) questions. We are volunteers

how do i remove :ptp mode on a samsung wb800f smart

me too same cushion

how to samsung wb250f ptp mode

HI is the shower and toilet on the second floor???

If so iets your 110 waste pyp that is blocked and u must try and look for an inspectoin eye to plunge it. dont throw draincleaner down your pyp becose you also have a leak. the drain cleaner can make the leak worse. if u dont get an inspection eye call a plumber. becose u will probebly need 1 to fix the 110 pyp where ever the leak may be.

Remove the trap at the bottem of the sink and clean out the 40/50mm pyp.

Must be a blocked pyp, bt might wane get a plumber for that seing the 40/50 pyp cleaner is exspensive. or thy to plunge it with hothot water and drain cleaner, bt remeber to clouse all zinks ect befor plunging to make a vacume.

plz rate my advice

Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.