Question about D-Link AirPlus DI-614+ Wireless Router

1 Answer

How (or whether) to configure dlink 614 as a wireless access poin

I have a dlink 614+ router, and want to reconfigure it as a wireless access point or bridge, the idea being for it to pick up the Internet connection wirelessly and be able to serve it over the ethernet wires.

Posted by on

  • bill_haddad Jun 24, 2009

    The router manual does not contemplate turning the device into a bridge, and as far as I have been able to discover, Dlink never upgraded the firmware to make this possible.

    One thing I might try if I'm feeling adventurous is to download the firmware for the DI-713, which is their wireless bridge device, and try to install that in the 614, on the theory that the physical devices are essentially the same. Worth a try, as the router is useless to me as such.


  • bill_haddad Jun 24, 2009

    ok, one final comment here: I tried my plan and downloaded a firmware update for the DI-713P, but when I tried to select it to upgrade in the DI-614, it just gave an error and refused to do it. Oh well, worth a try and no harm done. Guess I will have to actually buy (!) a bridge if I want to use one...

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 428 Answers

Go to this link and read the manual.
You may require a firmware upgrade also.
Thanks
Please rate the answer if it was helpful to u
Good Luck
:)

Posted on Jun 24, 2009

  • Tharinda
    Tharinda Jun 24, 2009

    mmm yes

  • Tharinda
    Tharinda Jun 24, 2009

    yes its an access point only as the manual says
    Just read. And as dlink says its firmware updates for other products it not compatible due to the chip's capability and the circuitry
    So u hv to buy another one
    To make a wireless bridge you need an Access Point (2 off) with
    wireless bridge feature such as DLinks DWL-900AP+ or the Linksys WET-11.
    :)


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I Need Installer For My D-Link DIR-600 Wireless Router


There are ways to configure router:
1. Is by using Installer using a CD came with it or
2. Access routers Graphical User Interface (GUI) through Internet browser. Just type in on the address bar the IP address of your router. For dlink it has a default IP of 192.168.1.0.

Note:
Before accessing router configuration make sure that the yellow cord (ethernet cable) is connected directly from the router to your computer.

Sep 14, 2013 | D-Link Dlink Dir-600 Wireless Router...

1 Answer

Crack password


Reset the router to "factory default",
which resets the ID/password.
Then, reconfigure your router.

Aug 14, 2013 | D-Link Computers & Internet

1 Answer

I am using DLINK DWL-7100 Wireless AirPremier Access Point in unsecured mode. I cannot reach the logon page to enable security (192.168.0.50). Just keeps timing out.


To secure the router, first you have to access the router through web browser (Internet Explorer) by typing the IP address of your router in the address bar, which is usually 192.168.1.50 (default) The default administrative user name and password (unless you've configured otherwise, the default username is admin and bno password). If you cannot access it wirelessly, try accessing through wired connection. Otherwise, you can simply resetthe router to factory default setting, press and hold the reset button for few seconds (It is at the back of the router near the DC Power Jack). The LEDs will then blink and the routers factory settings wouls be restored.

Please note that after RESETTING THE ROUTER to defaults, ALL SETTINGS WILL BE LOST AND YOU HAVE TO RECONFIGURE IT. Generally, after hard reset you get the connectivity, however, you have to make the connection secure etc.
Please, refer the product guide/manual and make configurations as per the details provided by your Internet Service Provider (ISP).



Feel free to contract me for further assistance

CreativeTECH

Dec 31, 2010 | D-Link AirPremier DWL-7100AP Wireless...

1 Answer

I have an ACER Aspire notebook. Its new wireless


ip settings,, may be ur getting a bad ip or ur dhcp is not configured properly... reset tha router and reconfigure it

Jan 16, 2010 | Apple AirPort Extreme Base Station...

1 Answer

Wont connect to internet


I might advise you to reconfigure the DI-514 Wireless Router, Access the IP address 192.168.0.1 using the Internet browser and configure as Dynamic IP address. You got a red light because the router is not configure yet or no Internet connection from your provider.

Mar 21, 2009 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

Re-installing DI-624


Access the configuration page of your router by default its 192.168.0.1, Login to the Dlink page by default the Username is Admin and Password is Blank and then reconfigure your router for Internet connection.

Dec 30, 2008 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

I have a dlink wireless router what do i do to reroute it


The CD is actually just a guide in configuring your router. You can still configure/use it even without the setup CD. If you need to reinstall/reconfigure your router, please provide the model number of the router and your Internet service provider (cable or DSL) so I can help you.

Aug 05, 2008 | Computers & Internet

1 Answer

D-Link 614 Plus


You need to do some reconfiguration on your router by using the setup cd or by manually configuring it using the user interface of the router.

Apr 05, 2008 | D-Link DI 514 Wireless Router (DI-514)

3 Answers

How to Configure D-link dwl-510 WiFi Card


To configure your linksys, access point, we need more information, the ipaddress oif your dlink router and the wireless settings on your dlink router..,

for more informations, check this link http:kb.linksys.com

for more details contact linksys; 18005465797

Dec 14, 2007 | Linksys Wireless-G WRT54G Router

4 Answers

DI-524 Configuration as "Client"


hi
just had same prob if you go to dlink site in phillipines there you will find the latest firmware for dlink 524 . i couldnt belive i had to do this as all links to uk site had no pages diplayed .i went first to .singapore site then to australia but the most uptodate firmware i found was on phillipines site

ver2.06b02

Sep 20, 2007 | D-Link AirPlus DI-524 Wireless Router

Not finding what you are looking for?
D-Link AirPlus DI-614+ Wireless Router Logo

Related Topics:

1,170 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...