Question about National Detroit Air Tools & Compressors

Open Question

How do i get the shoe off of a national-detroit air file to change the bottom bearing

The file is a f824101

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are interesting facts for Michigan


There are many interesting facts about Michigan. Michigan's total population is 9,500,200 residing in 58,572 square miles. Some of the major ones are Detroit, Flint, Grand Rapids, Ann Arbor, and Lansing, which is Michigan's capital. The Highest recorded temperature was 112F and the lowest -51F.
Michigan is the first state in the Union to have outlawed affirmative action for college admission.
Windsor, Ontario is south of Detroit, Michigan, and is separated by the Detroit River. Windsor marks the only border crossing where entering the mainland United States from Canada involves traveling north.

The Detroit-Windsor international border is the busiest border between the United States and Canada.
Michigan is simultaneously known for its cities, supported by heavy industry, and its pristine wilderness, home to more than 11,000 lakes. The clang and clamor of Metro Detroit's crowded thoroughfares and busy factories stand in vivid counterpoint to the tranquility found in virtually every corner of the state.
An individual from Michigan is called a "Michigander" or "Michiganian". Also at times, but rarely, a "Michiganite".
The canal and locks at Lake Huron were opened in 1855.
Michigan is nicknamed the "Great Lakes State", and also the "Wolverine State", from a nickname earned during the Toledo War.
Michigan has around 150 lighthouses, the most of any U.S. state. The first lighthouses in Michigan were built between 1818 and 1822. They were built to project light at night and to serve as a landmark during the day to safely guide the passenger ships and freighters traveling the Great Lakes. See Lighthouses in the United States.
The first soda pop made in the U.S., Vernor's ginger ale, was created by accident in 1866 in Detroit.
The world's largest registered Holstein dairy herd is in Elsie.
Michigan has the most registered boats (over 1 million) of any state in the Union.
Michigan is home to the Soo Locks, the world's busiest lock system, and the Mackinac and Ambassador Bridges, each formerly the world's longest suspension bridge.
Michigan has six international crossings with Ontario, Canada:
- International Bridge (Sault Ste. Marie, Michigan and Sault Ste. Marie, Ontario)
- Blue Water Bridge, a twin-span bridge (Port Huron, Michigan and Point Edward, Ontario, but the larger city of Sarnia, Ontario is usually referred to on the Canadian Side
- Detroit-Windsor Tunnel
- Ambassador Bridge - Canadian Pacific Railway tunnel
- Detroit-Windsor Truck Ferry (Detroit, Michigan and Windsor, Ontario) A second international bridge is currently under development between Detroit, Michigan and Windsor, Ontario. Detroit River International Crossing Study Website

Michigan's 2004 commemorative quarter featured the outline of the state and the surrounding lakes.
Michigan is a leading state in the ownership of recreational boats and in the sale of hunting and fishing licenses.
The Great Lakes account for one-fifth of the world's surface freshwater supply.
Michigan has approximately 40 ski resorts.
Michigan forestland covers more than 52 percent of the state at 18.5 million acres.
Michigan has the largest State Forest system in the nation.
Michigan has 4 National Forests. The Manistee, Hiawatha, Ottawa, and Huron, although the Manistee and Huron are administratively combined.
Its stone is Petoskey, and its state tree is the White Pine.
Michigan's flower is the Apple Blossom.
Did you know that Michigan's state bird is the Robin?
Michigan is the 11th largest state of the United States, and it was the 26th state to become part of the United States.
Its shoreline is longer than every other state except Alaska.
Michigan produces many useful products. The products that are produced in factories are; automobiles, transportation equipment, fabricated metals, machinery, plastics, and office furniture.
Many famous and interesting people grew up in Michigan. Henry Ford grew up there. He was the inventor of the automobile. The first automobile was driven in Michigan. Tomas Edison moved to Michigan at a very young age. You also know he invented the first electrical light. Charles Lindburgh lived in Michigan. He was the first person to fly across the Atlantic Ocean alone.
Michigan is home to more public golf courses than any other state.
Michigan has 116 lighthouses and navigational lights.
Henry Ford, who produced his first experimental car in 1893, founded the Ford Motor Company in 1903.
Michigan has more than 4,000 miles of snowmobile trails.
The soda beverage Vernors was invented in Michigan
Because of their high concentration of confectionery shops, Northern Michigan residents often refer to tourists as "Fudgies".
Faygo was founded in Detroit on November 4, 1907.
Michigan is the largest producers of cherries of all the states.
Michigan ranks 1st in the nation in the number of registered snowmobiles.
Michigan ranks 3rd in the nation in licensed hunters at over 750,000.

Oct 01, 2014 | Games

1 Answer

Change cam bearings 1450 flhx


No, but if your cam shoes have never been replaced, have them checked. In some bikes they go as early as 30,000 miles. I just replaced the shoes in my Fatboy at 32,000. If you do replace the cam shoes or do any other work in the cam cavity, change the stock cam bearings for the Screamin' Eagle bearings. Better bearings and cheap insurance, but there is no need to change them unless you're in there for something else, unless the bearings went bad for some reason.

Sep 09, 2012 | 2006 Harley Davidson FLHX Street Glide

1 Answer

How do I get the rear spindle off so I can replace the emergency brake shoes on my 2006 chrysler pacifica?



Adjustment

  1. Place parking brake lever in -full released- position.
  2. Raise and support vehicle.
  3. Remove plug in parking brake shoe support to access adjuster star-wheel.
  4. Through the access hole, rotate the adjuster star wheel in the following direction to expand the shoes outward against the drum:
    1. Left brake - Rotate star-wheel toward rear of vehicle.
    2. Right brake - Rotate star-wheel toward front of vehicle.
  5. Using an appropriate tool, turn adjuster star wheel until wheel will not rotate (dead lock).
  6. Back off adjuster six detents (teeth).
  7. Rotate wheel, checking for light drag. If drag is too heavy, continue to back off adjuster one detent at a time until light drag is present. Do not back off star-wheel more than 17 detents from wheel lock.
  8. Install access plug.
  9. Adjust opposite wheel parking brake shoes using same method.
  10. Lower vehicle.
  11. Apply and release parking brake lever once to ensure proper operation of parking brakes.


Removal & Installation NOTE The following procedure may be used to remove shoes on either side of the vehicle.

  1. Lock out automatic adjuster in parking brake lever.
  2. Raise and support vehicle.
  3. Access and remove rear hub and bearing.
  4. Remove parking brake cable bolt at knuckle.
  5. Completely back off parking brake shoe adjustment.
  6. Remove parking brake shoe adjuster spring.
  7. Remove shoe adjuster.
  8. Remove upper brake shoe hold-down clip and pin.
  9. Remove lower brake shoe hold-down clip and pin.
  10. Remove upper and lower shoes with return spring from shoe actuator.
  11. Remove return spring from shoes.

    0996b43f80204c12.jpg

    Fig. View of the actuator (1), support (2), adjuster spring (3), return spring (4), caliper adapter (5), shoes (6), hold-down clips and pins (7) and adjuster (8)

To install:
  1. Install return spring between upper and lower shoes.
    NOTE Before installing shoes on actuator, make sure actuator hooked to rear cable is positioned with word -UP- facing outward.
  2. Install upper and lower shoes with return spring on shoe actuator located on parking brake cable.
  3. Install lower brake shoe hold-down pin through rear of support and lower shoe, then install hold-down clip.
  4. Install upper brake shoe hold-down pin through rear of support and upper shoe, then install hold-down clip.
  5. Install shoe adjuster. Place end of adjuster with star wheel upward.
  6. Install parking brake shoe adjuster spring.
  7. Install bolt securing parking brake cable to knuckle and tighten bolt to 21 ft. lbs. (28 Nm).
  8. Using Brake Shoe Gauge, Special Tool C-3919, or equivalent, measure inside diameter of parking brake drum portion of rotor.
  9. Place Gauge over parking brake shoes at widest point.
  10. Using adjuster star wheel, adjust parking brake shoes until linings on both park brake shoes just touch jaws on gauge. This will give a good preliminary adjustment of parking brake shoes, before a final adjustment is made at end of this procedure.
  11. Install hub and bearing with wheel speed sensor as well as all components necessary to access it.
  12. Lower vehicle.
  13. Unlock automatic adjuster in parking brake lever.
  14. Perform final adjustment of parking brake shoes

  15. Adjustment This vehicle is equipped with permanently sealed rear wheel bearings. There is no periodic lubrication or maintenance recommended for these units.


    Removal & Installation

    1. Raise and support vehicle.
    2. Remove wheel mounting nuts, then tire and wheel assembly.
    3. If equipped with AWD:
      1. Remove cotter pin, nut lock and spring washer from half shaft.
      2. While a helper applies brakes to keep hub from turning, remove hub nut and washer.
    4. Remove brake caliper and rotor from hub and bearing assembly.

      0996b43f807cb548.jpg

      Fig. Hub assembly

    5. Disconnect vehicle wiring harness connector at wheel speed sensor connector.
    6. Unclip wheel speed sensor connector from spare tire mounting support.
    7. Disconnect two sensor cable routing clips on rear suspension crossmember.
    8. Disconnect two sensor cable routing clips along toe link.
    9. Disconnect sensor cable from bracket on brake support.

      0996b43f807cb54d.jpg
    10. Completely loosen, but do not remove four bolts fastening hub and bearing in place. Once loosened from threads in hub and bearing, push bolts up against rear of hub and bearing to keep brake support plate in place when hub and bearing is removed.

      0996b43f807cb54e.jpg

      Fig. Rear hub and bearing mounting bolts

    11. Pull hub and bearing off knuckle and half shaft (if equipped with AWD), then thread wheel speed sensor cable through hole in brake support plate as it is removed with hub and bearing.
      0996b43f807cb54f.jpg
    To install:
    1. Position hub and bearing bolts though rear of knuckle and parking brake support just enough to hold support in place as hub and bearing is installed.
    2. Install hub and bearing by first feeding end of wheel speed sensor cable through hole in bottom of parking brake support. As this is being done, if equipped with AWD, slide hub and bearing onto half shaft. Place hub and bearing through brake support, onto knuckle, lining up mounting bolt holes with bolts and placing wheel speed sensor head at bottom.
    3. Install four bolts fastening hub and bearing in place. Tighten mounting bolts to 60 ft. lbs. (81 Nm).
    4. Place wheel speed sensor cable routing grommet into bracket on parking brake support.
    5. Route wheel speed sensor cable along toe link and rear suspension crossmember connecting routing clips where shown.
    1. Connect vehicle wiring harness to wheel speed sensor connector.
    2. Install brake rotor and caliper.
    3. If equipped with AWD:
      1. Install washer and hub nut on end of half shaft.
      2. While a helper applies brakes to keep hub from turning, tighten hub nut to 180 ft. lbs. (244 Nm).
      3. Install spring washer, nut lock and cotter pin on end of half shaft.
    4. Install tire and wheel assembly. Install and tighten wheel mounting nuts to 100 ft. lbs. (135 Nm).




May 18, 2011 | 2006 Chrysler Pacifica

1 Answer

The rear passenger wheel is making a grinding /rubbing noise is it an easy job to repair also there seems to be more brake dust on that wheel is this the cause of the problem due to the wheel bearing ps...


This definitely sounds like a wheel bearing going out, or possibly the rear brake shoes/pads are worn out. Either way you will have to take the wheels off to determine the cause of the noise. Changing the wheel bearing or brake shoes/pads is not that difficult of a job and with the right instructions, you will be back on the road in no time. For detailed information on changing the wheel bearing, please go here. If it turns out to be a break shoe/pad, then please go here for detailed instructions on changing brake pads/shoes.

May 02, 2011 | Renault Sport Cars & Trucks

1 Answer

Grinding noise in driver side front when wheel is turned to right - no noise when wheel is neutral


This may be either a dragging brake shoe or possibly a wheel bearing. The car needs to be taken to a mechanic or one of the national service dealers (Meineke, Midas, Wheel Works, etc.) for a diagnosis before the problem becomes more expensive.

Apr 09, 2011 | 2006 Scion xB

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top National Detroit Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1388 Answers

JOHN LAPIER

Level 3 Expert

2527 Answers

Brad Brown

Level 3 Expert

17155 Answers

Are you a National Detroit Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...