Question about Black & Decker Saws

Open Question

Jigsaw just died wont start

My black&decker variable speed jigsaw,just cut out .checked fuse and is ok. had it 10 years, infrequent use. There is no power at all ?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2976 Answers

SOURCE: both leaf springs have come off the roller wheel guide

You will have to take the case apart and push them into place. If you have access to a hemostat or a nice long, this pair of needle nose pliers, it will be helpful. There is possibly a screw inside that holds them in place. If so, get the smallest bottle of blue threadlocker that you can find. It's quite expensive and you only want enough to wet the screw threads. Only use blue, it's removeable. If you use red or black, you will not be able to turn the screws if the problem ever happens again.

Posted on Jan 03, 2009

Ad
efs_perpends
  • 1996 Answers

SOURCE: my husband has a BLACK & DECKER JS515 VARIABLE

Here is a link to the instruction manual, and just under the place where it says Save These Instructions it tells you how to change the blade.
http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/90520882,JS515.pdf
Fitting the saw blade (figure A)
- Hold the saw blade (9) as shown, with teeth facing forward.
- Push the lever (3) downwards.
- Insert the shank of the saw blade into the blade holder (10) as far as it will go.
- Release the lever.

There is a little lever where the base of the blade fits into the holder that you depress to release the blade...You can see a picture of it in the manual.

I hope this answers your question...if so, please take a aec to rate this post...thanks.

Posted on Mar 28, 2009

efs_perpends
  • 1996 Answers

SOURCE: lost instruction sheet

Try this link: http://www.accesstoretail.com/uploads/partinfo/686870.pdf
It should have exactly the information you're looking for.

If I've managed to answer your question or solve your problem, please take just a moment to rate this posting...thanks!

Posted on Mar 28, 2009

  • 83 Answers

SOURCE: Looking for the Manual for a Black and Decker

Your going to need to contact a service center to get a manual. B&D own dewalt, that's why it's a dewalt site. Dewalt has a better name so they use it instead of B&D. Here is a listing of the service centers.
They might not stock parts and manuals for your tool anymore but it's worth a shot.

http://www.blackanddeckerservicenet.com/Support/FactoryOwnedLocations.aspx

Posted on Apr 02, 2009

  • 236 Answers

SOURCE: How do i remove the blade on a black and decker

either on the left or right side of the blade holder there will be a little lever to pull that will release the blade, pull on the blade at the same time you pull on this release

Posted on Jan 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What kind of blade for Black and decker #7580 variable speed 3 amp jigsaw


A jig saw blade. There may be some reason why only a B & D blade should be used.

Sep 22, 2016 | Saws

1 Answer

When cutting straight with my jigsaw the blade floats even though it is in the lock position


There is a speed and angle ratio that must be observed . Depending on the density of the material and the thickness. The shoe plate can be raised or lowered to assist with the forenamed floating condition. Proper blade selection and sharpness is essential.

With thick materials pushing the blades design, speed and force must be regulated through patience to provide the accuracy you demand. The complete blade system is another part of your investment . Understanding what and when can overcome fast if problems arise. Assuming all of this is in your tool box. I always have been taught. Only adapt when all reason is exhausted.


The last part I have had happen is vibration and tool integrity. Maintaining a tight fastener system all over the tool by lubrication is paramount from use or lack of it. Preventive measures spot stuff from happening when you are making the million dollar cut. But we all know that. Daily or startup practice. Just like stretching before playing, a great coach takes the time to do it for their selves too.


There are six JS700 models. Here is a place for parts should that arise Black Decker Jigsaw Replacement Parts Repair your Black Decker Jigsaw... . Furthermore, here is some words for those who are new at the application. Take a look. How to Use Jigsaw basic. This next look in video instruction is thorough and shows intermediate techniques with some experienced foundation. How to Use Jigsaw produced by skill. The Woodworker Journal places the top six picks side by side in the last video offered Top Shelf Jigsaw Review . There is one called a "Mafell" which has a so called perfect orbiting system, which some make it, the straight cut King.


I took the time to do this on the first day of summer. There is lots more to discuss. I think you have the most versatile easy to learn tool in your shop. I am almost sure you think so too. Keep humming. Fare. Well.


Mar 28, 2014 | Saws

1 Answer

Oil leak from my Skil Jigsaw and it keeps Jamming when I cut wood


get a nail file and sharpen the blade till you can see your face in it

May 07, 2013 | Skil Top Handle Jig Saws Variable Speed...

1 Answer

Hi I have a Black and Decker Jig Saw 7588 Type One that works fine but I can not find replacement blades for it here in San Diego, California. Where can I find the blades?


I have the blades and the 7588 jigsaw. thinking about selling on ebay. search for black & decker jigsaw w/ blades in next couple days if interested in buying saw with 6 blades. thankyou, makthriftsales

Jan 14, 2013 | Black & Decker Single Speed Jig Saw

1 Answer

Black & Decker Q200 not variable speed now??


if you took it apart to change the chuck you might have disconnected some wire id check that first

May 29, 2012 | Office Equipment & Supplies

1 Answer

I purchased a new B&D variaable Speed Orbital


you can order that in any B&D service center..try it..

Jun 09, 2011 | Black & Decker Saws

1 Answer

I have a corded Black and Decker jigsaw, that is brand new. It cut one cut and then will not come back on. Can i reset something on the saw?


Don't bother. Return it to the store where it was purchased. No tool should malfunction that early in its life.

May 26, 2010 | Black & Decker Single Speed Jig Saw

1 Answer

I do not know to use the black and decker jigsaw.


Draw the circle pattern on the wood where you need it. Drill a 1/2 or 3/8 inch hole inside the circle, near the circle line. Insert the jigsaw blade into the hole and start cutting, following the line.

If you have the scrolling feature on your saw, don't use it, lock the scroll.

Sep 20, 2009 | Black & Decker Saws

Not finding what you are looking for?
Saws Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Jason

Level 2 Expert

211 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Black & Decker Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...