Question about JVC HD-52G886 52" Rear Projection HDTV

2 Answers

HAVE A JVC HD-52G886 TV HEARD A POP PIC WENT BLACK LIGHTS BLINKING REPLACED THE LAMP SAME THING REPLACED THE FAN SAME THING REPLACED THE POWER BOARD NOW GET A PIC FOR 3 SECONDS AND BACK TO NO PIC WITH LIGHTS FLASHING ANY IDEAS BEFORE I KICK THIS THING TO THE CURB THANKS

Posted by on

  • KEN HANNEMAN
    KEN HANNEMAN May 26, 2014

    took the air hose to it when i replaced the power supply thanks though

  • matt martin
    matt martin May 28, 2014

    Well you did try. These are some of the toughest to TVs repair. And, yes, lot of us TV repairmen do fail. Its something taboo! Thanks for visiting me.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 1,213 Answers

Before you give up, try this. Pull the back cover off. Grab a leaf blower and blow the dust out. You should do this outside. I have done this on other DLPs and have had good success. It may surprise you, dust can act as an insulator, and can shut down a TV. Heat is an enemy to electronics. Thanks for asking.

Posted on May 25, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Try a tv repair man before you run out of money we all have our limits on thing we can fix.

Posted on May 17, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

SOURCE: my jvc hd-56g886

replace the lamp

Posted on Nov 04, 2008

  • 1 Answer

SOURCE: jvc tv

when both the blue light and red light are blinking it means 1 of 3 things. 1. lamp replacement. This often works everytime for the repair. TIP!!! DO NOT USE ANY OTHER LAMPS OTHER THAN JVC AUTHENTIC LAMPS. ANY OTHERS AND YOU RISK DAMAGING YOUR TV FURTHER. 2. the fans are not working properly or need to be replaced. They need to be cleaned every so often and they will stop working from burn-out if not done so. This repair will cost you less than 100 dollars. 3. The ballasts are defective and need to be replaced. The ballasts themselves run about 150 dollars. I tell you I have fixed this TV more times than I care to count, not to mention the number of lamps I have gone through. The guy at the TV repair place now knows me by name when i come to buy lamps. :(

Posted on Dec 07, 2008

  • 8457 Answers

SOURCE: So JVC HD-56G786. Previous post I stated heard

Check ur fan first,take out the power connection see if register on the screen.U replaced the light engine blast.

Posted on Dec 17, 2009

  • 5 Answers

SOURCE: Last night my JVC HD-52G886 picture turned dark

SRP-9022A main power board is bad, usually the cp9211 fuse is bad on this board. Board runs about $150

Posted on Jan 12, 2010

  • 5 Answers

SOURCE: jvc hd-52g886 i turn it on but black picture and

your main power board SRP_9022A needs to be replaced

Posted on Jan 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn power on the power light comes on but no picture the lamp light comes on then starts blinking?


The tv projection lamp has not been replaced in this tv like 1 1/2 or 2 years?The tv been on an watches tv like 4 or 5 hours a day?Yes,than the projection lamp life is over.The tv require a new projection lamp.

Oct 12, 2010 | JVC HD-52G886 52" Rear Projection HDTV

1 Answer

How do i reset my jvc tv


Either a bad lamp or bad reciver board.If audio amp ic on reciver board shorts ,it will kill part of supply and lamp ballast will not turn on and fire lamp.

Dec 28, 2008 | JVC HD-52G886 52" Rear Projection HDTV

2 Answers

TV not turning on


This is the lamp error code. The lamp part# for your unit is
TS-CL110U. Hope this Helps.

Mar 21, 2008 | JVC HD-52G886 52" Rear Projection HDTV

Not finding what you are looking for?
JVC HD-52G886 52" Rear Projection HDTV Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74634 Answers

Jaime Hernandez

Level 3 Expert

2323 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...