Question about Cell Phones

1 Answer

How do i set the timing in my 1997 nissan 2400\

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 55 Answers

Use a strobe light... a powerful one can be used in daylight... there will be a mark on the crank-case and you undo the distributor and rotate it until 2 marks are co-incident... best to remark them with chalk or white paint. It's not difficult.

Posted on May 17, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set timing on 2000 Nissan frointer 3.3 liter engine


VG33 engine will have timing marks. a timing gun is also handy in these situations.

you can find information on how to change the timing belt/set timing in the repair manual (check link for navara aka frontier)
Nissan Navara Service Manual 1997 2005 Service Repair Manuals

Jan 08, 2017 | 2000 Nissan Frontier

1 Answer

Where is the cam sensor and the crank sensor located?


autozone dot com and make a free account and put in the vehicle information and then look for the free repair gudes.

Oct 02, 2013 | 1997 Nissan Pickup

1 Answer

I am just wondering if my 1997 nissan pickups engine is a free clarence motor. 2400 4 cylinder motor.


The 2.4L engine has a chain driven camshaft and is an interference type engine meaning that if the chain should fail the valves can be damaged by being struck with the pistons.

Feb 20, 2011 | 1997 Nissan Pickup

1 Answer

Does the oil pan have to be lowered to remove the timing chain cover on a 1997 Nissan pickup 2400 engine?


it does due to the sump gasket at the bottom but if you can carefully slide a cutter under the cover when all the bolts are out you may be lucky enough to not damage the gasket. if you do damage the sump gasket cut it back flush with the engine and apply a sealer like THREE BOND to the area to create a new liquid gasket. to do it correctly remove the sump

Jun 22, 2010 | 1997 Nissan Pickup

1 Answer

Nissan Maxima timing belts and transmission


$1000-2400 depends on your shop of choice

Nov 24, 2009 | 1997 Nissan Sentra

1 Answer

How do you set the base timming


first hope u have a timing light, there should be a pos.and neg.
wires, red to pos side of battery and black to neg.side, and a third
wire hooks on #1 spark plug, if u need to adj. timing there is a
nut under the distributor u loosen and turn to left or right.and timing
mark are in the front crank pulley.

keep me post it if that works for u

G

May 11, 2009 | 1997 Nissan Pickup

1 Answer

WHAT IS THE PROPER TIMING ON A NISSAN 2400 1992


whyknot87: As far as I know, Nissan did not put a 2400 in a Sentra in 1992 or for that matter any year that I am aware of.
The Sentra had an SR20DE Which was a dual overhead cam engine.
According to Nissan, setting the timing on this engine requires the use of a scan tool as part of the procedure. There is no procedure for setting it without a scann tool.
The timing for this engine is 15 dedrees +/- 2 degrees @700RPM

The other engine this year Sentra used was a GA16DE
which was also a dual overhead cam engine.
This one could be set in a conventional manner with a regular timing light. You must have the engine at normal operating temp.
Disconnect the throttle switch and then you set the timing to
10 degrees +/_ 2 degrees @700RPM

The 2400 engine you probably are referring to is the KA24DE which came in Nissan 240SX and the Nissan Stanza. There are procedures for setting these as well, however I need to know wha4t car and engine you have?
The 2400 had 15 degrees +/- 2 degrees @700RPM

Apr 10, 2009 | 1992 Nissan Sentra 4 Door

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

William Alequin

Level 3 Expert

922 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...