Question about Powermatic Saws

Open Question

Why it suddenly stopped nailing? eurasia brad nailer AN32/3

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1383 Answers

SOURCE: brad nailer not firing nail...can hear brief air noise upon pulling the trigger

Porter cable makes a number of brad nailers (18 gauge) that very quickly suffer from the problem that you are having. You did not mention the model number of your gun but if it is one of these, (bn125a, bn200a, ns100a) kit # 60061 will fix the problem. It costs between 25 and 30 dollars. Google that part number or order from www.dewalt.com. Dewalt owns the porter cable brand. Before you order the kit, check that the driver blade is not bent and stuck. The driver should travel freely down the cylinder. When you install parts, use Danco silicone grease to lube (availabel at Lowes in the plumbing department) If your model # is different from those mentioned above, please email me and I will recommend a repair.

Posted on Apr 27, 2009

Ad
  • 8 Answers

SOURCE: nail gun wont fire

First - the air pressure has to be high enough - check the regulator on the tank to make sure it is delivering in excess of 60-70 psi (which I am sure you have already done).

If you have dry fired these guns (i.e. shot them off with no nails in them while you were lubricating them maybe) the mechanism inside could be damaged. I had that happen to one of my nailers (same brand). That was when I learned not to dry fire them...

Since both of them are not working though I would be more inclined to look at the air supply first.


Posted on Sep 10, 2009

brewerstool
  • 141 Answers

SOURCE: My Sears Craftsman 18 gauge brad nailer won't nail

Your driver is not returning. Depending on the model that you have there could be a couple of problems. The most likely is that your piston stop is crumbled and some of your seals are worn or damaged. Whether or not you can fix the nailer depends on if the parts are available from Sears Parts Dept. If you would like some more information about fixing your nailer please post which model it is that you are trying to fix and I can see if the parts are available. I will post the information back to you.

Posted on Oct 12, 2009

rowdy45176
  • 2176 Answers

SOURCE: My brad nailer will not shoot any nails. When I

it sounds like the piston/driver might be stuck or the firing valve is malfunctioning. there are 4 screws to remove the top cap and you can see if the driver is damaged. Also before removing check to make sure there is not a nail jammed in the nose assembly. This tool is good for breaking the pin on the piston.

Posted on Oct 16, 2009

  • 8 Answers

SOURCE: my mastercraft electric brad nailer stapler wont

Look for a jam in the gun.Sounds like a brad is "hung up" in it, probably right at point where it feeds into the mouth of the firing point. Be sure you unplug it before you do this.

Posted on Jan 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brad nails crooked in bostitch


Have you inserted the correct Brad Nails? What is the code of brads you have inserted? Is the tool jammed?

Solent Products Air Nailing and Stapling Supplies

Mar 21, 2013 | Stanley Bostitch 18 Gauge Brad Nailer 1 -...

1 Answer

Does the brad nailer only use 2" brads or cam smaller nails be used also


Most nail guns are labeled with the longest nail/brad they can shoot but are capable of shooting shorter nails/brads. There should be a data sticker on the gun, usually on the magazine rail, or at least in the manual that tells you what pressure to operate the gun at, what guage brads the gun can shoot and the size of brads from shortest to longest it can handle.

Oct 22, 2010 | Sears TNT 3 gal Air Compressor with 2 in...

1 Answer

My brad nailer stop nailing! It makes the noise as if it was nailing, just not as loud or hard.


Make sure that you don't have a jammed brad in the nailing head. Are you using air-tool-oil fed through the air coupler on a regular basis? Hope this helps!

Oct 20, 2010 | Garden

2 Answers

My Brad sudddenly stopped working. Makes a Psft


If you've not already tried applying air motor oil to the gun than you should do this first. If this does not solve your problem than it's very possible that your main diaphram is worn or poruse. Thank you, Dana

Mar 31, 2010 | Stanley Bostitch 18 Gauge Brad Nailer 1 -...

2 Answers

My black and decker 18v brad nailer will not shoot brad


look to see that you are shooting the right sized nails in it. 16 and 18 gauge nails dont interchange and the can get hung up under the plunger if the try to shoot at all

Dec 15, 2009 | Tools & Hardware - Others

1 Answer

Porter Cable 18 ga Brad nailer - BN200 Will not reload


Strip and clean the whole diaphragm and spring arrangement. Also check whether a bad nail hasn't damaged the piston guide and caused it to jam when on return stroke.

Jun 13, 2009 | Porter Cable 18 Gauge 2 " Brad Nailer Kit...

1 Answer

Dont know what nails to use on my makita brad nailer


is that a model AF505? if it is, your problem may be the gauge. make sure you use 18 gauge nails, he 16 gauge are too big and will jam in the gun.

Feb 26, 2009 | Makita Brad Nailer Finish Nailer...

Not finding what you are looking for?
Saws Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Powermatic Saws Experts

80stech

Level 2 Expert

100 Answers

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

Ivan
Ivan

Level 1 Expert

35 Answers

Are you a Powermatic Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...