- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you hooked it up you didn't hook up the right wires because there is 12volt constant wire that keeps the unit to save things so when you turn it off it's not getting any power at all so it just resets
You must enter Standy mode to adjust the clock. To do this Press the (SRC) button. Select the "STBY" display 1. Select Clock Adjustment Mode Push the Control knob (the one on the right) towards (FM) or (AM) Select the "CLCK ADJ" display. 2. Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3. Adjust the hours Push the Control knob towards (FM) or (AM). Adjust the minutes Push the Control knob towards ( '>' ) 4. Exit Clock adjustment mode Press the (MENU) button.
1. Select clock adjustment mode
Push the control knob toward (FM) or (AM)
Select the "CLK ADJ" display.
2. Enter Clock Adjust mode
Press the Control Knob for at least 1 second.
The clock display blinks.
3. Adjust the hours
Push the control knob towards (FM) or (AM).
Adjust the minutes
Push the Control knob towards ('>')
4. Exit clock adjustment mode
Press (Menu) button.
you have to go into the main menu of the cd player. find demo mode and hold your knob down for like 5 seconds should turn it off. not too shure about the demo mode in that particular cd player but that is how it is with kenwoods brand new........or look in your cd player owners manual and find the section on DEMO MODE then go through the steps to turn if off.
I spent the better part of an hour trying to figure out how to get the "Clk Adj" screen on the KDC-MP228. Here is the solution (dont waste your time reading the manual, it does not explain this). First, I had screwed up my settings so I did a factory reset (hold in the reset button). Then, you need to turn off Demo Mode (in standby click the Menu button and then use the control button to navigate to "Demo On". Hold the control button in to turn Demo on or off (this is different from all of the other controls in the manual). Now that Demo is off, click Menu button again and use the Control button to navigate through the options, one of which is "Clk Adj". At that point, you can follow the instructions in the manual (Hold in Control button until the clock blinks (approx 2 seconds), then use the FM/AM buttons to change the Hours and the << >> buttons to change the Minutes). Press the Control button again to save your changes. I cannot believe how difficult it was to set the clock on this device, someone should smack the developer who wrote that code.