Question about Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

STANDBY 2TIMES BLINKING FOLT - Sony FD Trinitron WEGA KV-36FS120 36" TV

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sony Master
  • 74,136 Answers

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. Do a search by type in the brand name of the device to the search box.

Posted on May 18, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony bravia 32ex320 red led blinking 2times .what can I do


2X Blink - Main Power Error
A loss of REG12V from the power supply triggers this protect event. The usual cause is a failure of the main switching supply. In some instances, excessive loading on the secondary supply lines can cause the switching regulator to stop, or fail again, if a replacement board is installed. I would advise that you replace the main board. I hope this helps.

May 09, 2016 | Sony Televison & Video

1 Answer

Standby again folt


If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Mar 26, 2016 | Sharp LC20SH4M 20" MultiSystem LCD TV

1 Answer

HOW DO I KNOW BROKEN PARTS MY CTV BLINKING LED 2TIMES


You cannot tell what parts are broken, only what fault is being displayed. Google search your manufacturer make, model and word manual. Once you have the manual, you can find what the blinking lights mean.

May 27, 2015 | Televison & Video

1 Answer

Iturned ignition key on off on off on off,and,check engine light blinked twice,then twice again,then blinked five times,then four times,then five times,then five times,can you tell me what that means


This may have altered the programming of the alarm or ignition cutout. Your car may have a body control module which may have been altered. It may be more helpful if you specify more details including what model car you have and if it has an alarm or engine immobiliser.

Nov 05, 2014 | Cars & Trucks

2 Answers

What could be the problem with my sony bravia klv 40-bx420 lcd flashing red led 2 times


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Sidebar" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Aug 11, 2014 | Sony KLV-40BX420 40 1080p Full HD Bravia...

1 Answer

No1 and no2 green lights are blinking


check the www.dell.com for solution also check the user manual on their site!

Jan 03, 2014 | Dell OptiPlex 780 MT Desktop Computer...

1 Answer

Sony bravia klv_32u300a 2times red led blink error


Get into this blog site. It has all the details.

electronicshelponline(.)blogspot(.)com [in name Electro-Help]

Apr 11, 2012 | Sony Televison & Video

1 Answer

I was watching my kp61v80 and the screen went black-can you give me the trouble codes for the flashing standby light


Diagnosis item
TIMER/STANDBY
Indicater
Number of blinks
Supposed malfunction Condition
Self-diagnosis
screen display,
Diagnosis item: Results
•Power not ON 0
[Standby Power Supply System]
F601 open.
R607 open.
Q601 short circuit
[Main Power Supply System]
IC601 and R612 are broken.
VDR601 short-circuit
Cannot turn on the power.
LED doesn't blink.
+B OCP detection 2times Short circuit of power supply system in each circuit.
Goes to the standby mode
Short circuit of +B line
2 : +B OCP 000
+B OVP detection 3 times
T603 pin 78 open.
R672 open.
Goes to the standby mode
Malfunction of power supply circuit
3 : +B OVP 000
Vertical deflection stop 4 times
IC1509(V out) is broken.
Q1505(V Pulse Buffer) is broken.
Raster goes to one line horizontally, Aand then video
signal is muted.
4 : V Stop 000
Video out abnormality detection 5 times
Video out, Q705, 732, 761 and others in C board
circuit.
Q218, 219, 220 (A board)
TIMER/STANDBY LED blinks approx. 30 seconds,
and then blinks for the self diagnosis.
5 : AKB 000
Horizontal deflection stop 6 times
C515, 516 open.
IC206(YC Jungle) is broken.
Raster doesn't appear. 6 : H Stop 000
Audio abnormality detection 8 times
IC406(Audio amp.) is broken.
PS401, 402 open.
The sound is not out.
Goes to the standby mode
8 : Audio 000

Jun 17, 2009 | Televison & Video

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-36FS120 36" TV Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...