Question about HP Photosmart D7260 Printer
How do you fix an error message saying "out of paper" when there is lots of paper?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is a reply from HP about this error. The "Semifull Reset" seems to work for me so far.
I am Munik from HP Total care for All-in-One products and this is my response to you in regards to the query related to HP Photosmart C5180 All-in-One. Thank you for contacting HP Total Care and its a great pleasure for me to assist you.
I understand from your e-mail that your printer makes a lot of noise when it tries to print and also gives the following error message "Out of Paper Load paper face down in Main Tray", I regret for the inconvenience and apologize for the same.
To isolate the issue, I recomemnd you to refer this website and ensure the correct paper load:
Copy the URL from "http" to "c00704348", paste it in the address bar of the browser and then press Enter.
And now to resolve the issue, I request you to perform the following website:
Copy the URL from "http" to "c00786157", paste it in the address bar of the browser and then press Enter.
Now check the status, if the issue persist then perform teh following steps:
I. Power cycle
Follow the steps below to power cycle your all-in-one:
1. Unplug the power supply from the wall outlet.
2. Unplug the power supply from the back of the printer.
3. Wait at least 20 seconds, then plug in the supply back into the wall outlet.
4. Plug in the power supply back into the printer.
5. Press the power button to turn the printer on.
II. Semifull Reset:
A semi-full reset will do the following:
The user settings to the factory defaults, Language and country settings on some models.
Reset the All-in-One to the factory default settings by using these instructions:
1. Unplug the power cable from printer when the printer is powered on.
2. Press and hold OK and HELP buttons while plugging in the power cord.
I believe the above information helps you. If the issue persists, please get back to us with the results. We will be glad to assist you.
We appreciate you giving us the opportunity to provide you with superior customer service. I wish to take this opportunity to thank you for being one of our most valuable customers.
Have a nice time.
HP Total Care.
Posted on Jan 30, 2008
SOURCE: HP 6210 All-In-One
Open up the top and look into the cartridge/paper print area. Look in the corners, Sometimes little pieces of paper can still be stuck there. Once you are convinced that the paper and cartridge path is clear then...
Pull out the paper tray. Look inside the opening. If there is paper there then pull it out.
Take all of the paper out of the paper tray.
Turn it over (paper on top is now on the bottom of the tray)
Try it now.
Posted on Jun 21, 2008
SOURCE: hp 2355 all in one error message
mine HP was acting the same way after a jam. I contacted hp and they told me it was a hardware issue and that I would need to purchase a new printer. I found a KB on thier site for this issue. It involved removing both ink carts and then reseting the printer with the ink carts out. it seemed to work.
Posted on Jul 03, 2008
Perhaps you are loading too much paper into the tray. Please try to work through the steps in this troubleshooter and see if it has any effect. If not, please report back with the results and someone will be happy to assist you.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread. If I've managed to answer your question or solve a problem, please take a moment to kindly rate this post....thanks!
Posted on Apr 02, 2009
I had the same problem. I hadn't used the printer in a long time and it took a few minutes to figure out what I did. This may not be your problem, but there are two sliders on the main tray. The first goes left to right and the second goes front to back. If you've use normal 4x6 paper you put the paper in and push the slider forward to lock in the paper so it prints straight. The problem is if you run out of paper and haven't used the printer in a long time, you may try to slide the paper in just like you would a normal printer. But for it to work, you have to pull the front-to-back slider back, and make sure the paper is forward of that slider. If you've pushed it way forward after trying to shove your paper in, you may have to find something to pull it back out again, because your fingers might not be able to get in that far.
Posted on Jul 12, 2009
Tips for a great answer:
Mar 07, 2011 | HP Photosmart D7260 Printer
Mar 07, 2011 | HP Photosmart D7260 Printer
Nov 28, 2010 | HP Photosmart D7260 Printer
Mar 25, 2010 | HP Photosmart D7260 Printer
Jun 12, 2009 | HP Photosmart D7260 Printer
Apr 02, 2009 | HP Photosmart D7260 Printer
Feb 12, 2009 | HP Photosmart D7260 Printer
Feb 02, 2009 | HP Photosmart D7260 Printer
Nov 16, 2008 | HP Photosmart D7260 Printer
Nov 01, 2008 | HP Photosmart D7260 Printer
175 people viewed this question
Usually answered in minutes!