Question about 3Com NBX 3102 IP Phone

Open Question

Default gateway phone does not appear to use programmed default gateway

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my gateway mt6705 computor back to factory setting


Step 1:
Click "Start" on your Windows desktop. Navigate through "All Programs" and "Gateway." Click on "Gateway Recovery Management." Click "Restore" when the Gateway Recovery Management window pops up, which will take the system back to the default factory specifications. A box will pop up asking for confirmation, click "Yes" and then "Start." You may have to enter a password as well, but only if your particular Gateway had a password set. Wait for the computer to restart. A "Restore from factory default" box will appear, requiring you to click "Next" twice in a row. Click "OK" in the box that appears next, and wait for the hard drive partition to be created. The factory default installation will then be moved over to the hard drive. Click "OK" in the box that appears and wait for a second Gateway restart. Several minutes will pass as Windows "starts for the first time." When restarting finally finishes, a "Set Up Windows" dialog box will appear. Click "Next," followed by checking the license agreement box, and then "Next" again. Enter a user name and picture, if desired, and a computer name. Also, customize the background wallpaper for your desktop, optionally. Click "Next." Click "Use Recommended Settings" on the Protect Windows-based dialog box that pops up. Set your correct date and time settings in the next box. Select your location in the following screen. Click "Next," followed by "Start" to finish. Wait while Windows checks for your individual Gateway computer specifications and adjusts accordingly. This will likely take several minutes, so leaving your computer for a short time is fine. Windows will then prepare your hardware and finish your Gateway restoration process, including the installation of Gateway Recovery Management. Once completed, your Gateway is good to go and ready at factory settings.

Feb 25, 2013 | Gateway Computers & Internet

1 Answer

How to restore factory setting on gateway model mt6705


Step 1:
Restoring your Windows 7 Gateway computer to its original factory settings is a great way to get rid of pesky viruses you can't seem to remove from your computer, or simply to remove old programs and files from your computer and start with a clean slate. Your Windows 7 Gateway computer will likely run faster as a result of deleting old and unnecessary files. It's also a good idea to restore your Windows 7 Gateway computer to its original factory settings if you plan on selling it, or passing it along to a family member or friend.

Recover From Windows 7 Home Screen Click the "Start" icon in the lower-left corner of your Windows 7 home screen. Click "All Programs" in the Start menu, then click "Gateway". Click "Gateway Recovery Management" to open the Gateway Recovery Management program. Click the "Restore" header, then click "Restore System To Factory Default". Click "Yes" in the "Confirm Restoration" dialog box, then click "Yes". Click "OK" in the dialog box warning you that all of the personal data on your computer will be deleted. Your computer will automatically restart. When your computer restarts the restoration process will begin. The process could take anywhere between 30 and 90 minutes. Click "OK" when a dialog appears telling you that the computer has been restored to its original factory settings and that you need to reboot your Gateway Windows 7 computer. Your computer will reboot. After the computer restarts you will need to configure Windows 7 with your personal preferences. b> Recover at Startup Turn on or restart your computer and hold down "Alt" while clicking "F10" during startup until you are redirected to the Gateway Recovery Management program. Click "Restore System From Factory Default". Click "Next" to begin the restoration process. The process could take anywhere between 30 and 90 minutes.

Feb 25, 2013 | Gateway MT6705 Notebook

1 Answer

GATEWAY WINDOWS 7 FACTORY


Restoring your Windows 7 Gateway computer to its original factory settings is a great way to get rid of pesky viruses you can't seem to remove from your computer, or simply to remove old programs and files from your computer and start with a clean slate. Your Windows 7 Gateway computer will likely run faster as a result of deleting old and unnecessary files. It's also a good idea to restore your Windows 7 Gateway computer to its original factory settings if you plan on selling it, or passing it along to a family member or friend.

Recover From Windows 7 Home Screen Click the "Start" icon in the lower-left corner of your Windows 7 home screen. Click "All Programs" in the Start menu, then click "Gateway". Click "Gateway Recovery Management" to open the Gateway Recovery Management program. Click the "Restore" header, then click "Restore System To Factory Default". Click "Yes" in the "Confirm Restoration" dialog box, then click "Yes". Click "OK" in the dialog box warning you that all of the personal data on your computer will be deleted. Your computer will automatically restart. When your computer restarts the restoration process will begin. The process could take anywhere between 30 and 90 minutes. Click "OK" when a dialog appears telling you that the computer has been restored to its original factory settings and that you need to reboot your Gateway Windows 7 computer. Your computer will reboot. After the computer restarts you will need to configure Windows 7 with your personal preferences. b> Recover at Startup Turn on or restart your computer and hold down "Alt" while clicking "F10" during startup until you are redirected to the Gateway Recovery Management program. Click "Restore System From Factory Default". Click "Next" to begin the restoration process. The process could take anywhere between 30 and 90 minutes.

Feb 15, 2013 | Gateway LT2021u Netbook

1 Answer

I factory reset my gateway zx series all-IN-ONE because the recovery disks i created wouldnt work.then i reinstalled windows and now i have nothing in my programs list n i cant log in cuz they want a...


Click "Start" on your Windows desktop. Navigate through "All Programs" and "Gateway." Click on "Gateway Recovery Management." Click "Restore" when the Gateway Recovery Management window pops up, which will take the system back to the default factory specifications. A box will pop up asking for confirmation, click "Yes" and then "Start." You may have to enter a password as well, but only if your particular Gateway had a password set. Wait for the computer to restart. A "Restore from factory default" box will appear, requiring you to click "Next" twice in a row. Click "OK" in the box that appears next, and wait for the hard drive partition to be created. The factory default installation will then be moved over to the hard drive. Click "OK" in the box that appears and wait for a second Gateway restart. Several minutes will pass as Windows "starts for the first time." When restarting finally finishes, a "Set Up Windows" dialog box will appear. Click "Next," followed by checking the license agreement box, and then "Next" again. Enter a user name and picture, if desired, and a computer name. Also, customize the background wallpaper for your desktop, optionally. Click "Next." Click "Use Recommended Settings" on the Protect Windows-based dialog box that pops up. Set your correct date and time settings in the next box. Select your location in the following screen. Click "Next," followed by "Start" to finish. Wait while Windows checks for your individual Gateway computer specifications and adjusts accordingly. This will likely take several minutes, so leaving your computer for a short time is fine. Windows will then prepare your hardware and finish your Gateway restoration process, including the installation of Gateway Recovery Management. Once completed, your Gateway is good to go and ready at factory settings.
Hope this helps.

Jan 21, 2013 | Computers & Internet

1 Answer

Do you need a disc to restore a 450rog


Click "Start" on your Windows desktop. Navigate through "All Programs" and "Gateway." Click on "Gateway Recovery Management."



Click "Restore" when the Gateway Recovery Management window pops up, which will take the system back to the default factory specifications.

A box will pop up asking for confirmation, click "Yes" and then "Start." You may have to enter a password as well, but only if your particular Gateway had a password set.



Wait for the computer to restart. A "Restore from factory default" box will appear, requiring you to click "Next" twice in a row. Click "OK" in the box that appears next, and wait for the hard drive partition to be created.

The factory default installation will then be moved over to the hard drive.



Click "OK" in the box that appears and wait for a second Gateway restart.

Several minutes will pass as Windows "starts for the first time."

When restarting finally finishes, a "Set Up Windows" dialog box will appear. Click "Next," followed by checking the license agreement box, and then "Next" again.



Enter a user name and picture, if desired, and a computer name. Also, customize the background wallpaper for your desktop, optionally. Click "Next."



Click "Use Recommended Settings" on the Protect Windows-based dialog box that pops up.



Set your correct date and time settings in the next box. Select your location in the following screen. Click "Next," followed by "Start" to finish.



Wait while Windows checks for your individual Gateway computer specifications and adjusts accordingly.

This will likely take several minutes, so leaving your computer for a short time is fine.

Windows will then prepare your hardware and finish your Gateway restoration process, including the installation of Gateway Recovery Management.

Once completed, your Gateway is good to go and ready at factory settings.


hope this helps

Sep 21, 2012 | Gateway 450ROG Notebook

1 Answer

How do I reset it to factory?


Click "Start" on your Windows desktop. Navigate through "All Programs" and "Gateway." Click on "Gateway Recovery Management."



Click "Restore" when the Gateway Recovery Management window pops up, which will take the system back to the default factory specifications.

A box will pop up asking for confirmation, click "Yes" and then "Start." You may have to enter a password as well, but only if your particular Gateway had a password set.



Wait for the computer to restart. A "Restore from factory default" box will appear, requiring you to click "Next" twice in a row. Click "OK" in the box that appears next, and wait for the hard drive partition to be created.

The factory default installation will then be moved over to the hard drive.



Click "OK" in the box that appears and wait for a second Gateway restart.

Several minutes will pass as Windows "starts for the first time."

When restarting finally finishes, a "Set Up Windows" dialog box will appear. Click "Next," followed by checking the license agreement box, and then "Next" again.



Enter a user name and picture, if desired, and a computer name. Also, customize the background wallpaper for your desktop, optionally. Click "Next."



Click "Use Recommended Settings" on the Protect Windows-based dialog box that pops up.



Set your correct date and time settings in the next box. Select your location in the following screen. Click "Next," followed by "Start" to finish.



Wait while Windows checks for your individual Gateway computer specifications and adjusts accordingly.

This will likely take several minutes, so leaving your computer for a short time is fine.

Windows will then prepare your hardware and finish your Gateway restoration process, including the installation of Gateway Recovery Management.

Once completed, your Gateway is good to go and ready at factory settings.


hope this helps

Sep 08, 2012 | Gateway 832GM PC Desktop

1 Answer

Restore gateway sx2850


· Click "Start" on your Windows desktop. Navigate through "All Programs" and "Gateway." Click on "Gateway Recovery Management."

· 2


Click "Restore" when the Gateway Recovery Management window pops up, which will take the system back to the default factory specifications.

A box will pop up asking for confirmation, click "Yes" and then "Start." You may have to enter a password as well, but only if your particular Gateway had a password set.

· 3


Wait for the computer to restart. A "Restore from factory default" box will appear, requiring you to click "Next" twice in a row. Click "OK" in the box that appears next, and wait for the hard drive partition to be created.

The factory default installation will then be moved over to the hard drive.

· 4


Click "OK" in the box that appears and wait for a second Gateway restart.

Several minutes will pass as Windows "starts for the first time."

When restarting finally finishes, a "Set Up Windows" dialog box will appear. Click "Next," followed by checking the license agreement box, and then "Next" again.

· 5


Enter a user name and picture, if desired, and a computer name. Also, customize the background wallpaper for your desktop, optionally. Click "Next."

· 6


Click "Use Recommended Settings" on the Protect Windows-based dialog box that pops up.

· 7


Set your correct date and time settings in the next box. Select your location in the following screen. Click "Next," followed by "Start" to finish.

· 8


Wait while Windows checks for your individual Gateway computer specifications and adjusts accordingly.

This will likely take several minutes, so leaving your computer for a short time is fine.

Windows will then prepare your hardware and finish your Gateway restoration process, including the installation of Gateway Recovery Management.

Once completed, your Gateway is good to go and ready at factory settings.


hope this helps

Jul 19, 2012 | Acer Computers & Internet

1 Answer

I want to know how to restore my DX4200-09 to factory settings?


· Click "Start" on your Windows desktop. Navigate through "All Programs" and "Gateway." Click on "Gateway Recovery Management."


· 2


Click "Restore" when the Gateway Recovery Management window pops up, which will take the system back to the default factory specifications. A box will pop up asking for confirmation, click "Yes" and then "Start." You may have to enter a password as well, but only if your particular Gateway had a password set.


· 3


Wait for the computer to restart. A "Restore from factory default" box will appear, requiring you to click "Next" twice in a row. Click "OK" in the box that appears next, and wait for the hard drive partition to be created. The factory default installation will then be moved over to the hard drive.


· 4


Click "OK" in the box that appears and wait for a second Gateway restart. Several minutes will pass as Windows "starts for the first time." When restarting finally finishes, a "Set Up Windows" dialog box will appear. Click "Next," followed by checking the license agreement box, and then "Next" again.


· 5


Enter a user name and picture, if desired, and a computer name. Also, customize the background wallpaper for your desktop, optionally. Click "Next."


· 6


Click "Use Recommended Settings" on the Protect Windows-based dialog box that pops up.


· 7


Set your correct date and time settings in the next box. Select your location in the following screen. Click "Next," followed by "Start" to finish.


· 8


Wait while Windows checks for your individual Gateway computer specifications and adjusts accordingly. This will likely take several minutes, so leaving your computer for a short time is fine. Windows will then prepare your hardware and finish your Gateway restoration process, including the installation of Gateway Recovery Management. Once completed, your Gateway is good to go and ready at factory settings.


hope this helps

Jun 25, 2012 | Gateway DX4200-09 PC Desktop

2 Answers

I cant seem to figure out what is the IP address for my MSI RG60SE router.....


By default ip address is 192.168.1.1
or
192.168.0.1

But if your ip is different and if in your router DHCP is enabled then you have to check your computer ip address with which your router is connect.
Go to start menu then type in run "ipconfig /all"
then check gateway ip it is your router ip.
Also you can check your ip wtih phone reciver connect your phone receiver to router with phone line jack.
Then press * so you can listen configuration.
Let me kow if you need more assistanse.
Thanks.

Sep 24, 2009 | Computers & Internet

2 Answers

Setup Wizard won't appear


Kate I first suggest reviewing this link and determining the model of the router.

http://www.dlink.com/products/support.asp?pid=316&sec=0#quickInstallGuides

Second did you buy the router new or used because a used router may not be at the default address 192.168.0.1 you expect. Assuming you can access the router with your computer and wireless card -- open a command window (Start > All Programs > Accessories > Command Prompt) and type ipconfig and press enter. If you cannot connect using the wireless use a wired connection to the router ports to get the gateway address as indicated above using ipconfig. There may be multiple connections however we are looking for one with an IP Address and a Default Gateway probably like 192.168.?.? where the first question mark is the same and the last are different. Use the default gateway address to access your router instead of the default 192.168.0.1. If the password has been changed meaning the router logon fails for you with the default password, the manufacturers documentation may describe a reset process to return the router to factory default including the password to allow you access (note the gateway address will also revert to the manufacturers default requiring a reboot or ipconfig /reset and ipconfig /renew to reconnect the computer to the router after the change.

Dec 02, 2007 | D-Link AirPlus DI-524 Wireless Router

Not finding what you are looking for?
3Com NBX 3102 IP Phone Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

NBX_Tech
NBX_Tech

Level 1 Expert

58 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...