Question about Hoover HDC6 Electric Dryer

1 Answer

How to get to motor on hoover vhc691b?

The motor has stopped and needs changing how do you get it out of drier?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Very rare a motor fails on a hoover drier normally its the capacitor that fails. you can hear the motor humming but the drum wont rotate to proof its the capacitor turn the machine on press start listen for the motor humming open the the door of drier turn the drum by hand fast then shut the door as fast has possible then the drum should start going around . then this proves its the capacitor fault you are doing the job of the capacitor giving the motor a start .

Posted on Jun 15, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the door switch


Go to espare.com and watch the vidios about that

Dec 04, 2015 | Hoover Vision HD VHC691B White Electric...

1 Answer

Kenmore king size capacity 90 series


could be thermal overload in motor its a motor protector in the motor when the motor gets hot it cuts power to the motor when motor cools it closes and resets age of drier counts some times you can take drier apart and blow dust out of motor and will fix now if the door is not closing tight vibration can cause door switch to break contact that will do it too most of time motor or relay must be replaced

Jan 06, 2008 | Kenmore 63942 Dryer

1 Answer

I am replacing the door of my tumble dryer and I need to know haw to assemble.


photo graph it with ure phone then put it back togather in reverse order

Feb 06, 2015 | Hoover Vision HD VHC691B White Electric...

1 Answer

Why does drier stop midcycle and need 30 minutes before restart?


OH OH sounds like a bad motor with bad motor windings u can try disconnecting the belt and drum and run motor by itself see how it does then

Aug 30, 2014 | Kenmore Dryers

1 Answer

How can i change the small belt 4-PHE-285 for Beko tumble drier DCU 9330W ?


Hi Victor - I have the same issue I have exposed the motor and removed the larger belt and the spring but I can not see a way to get the smaller belt over the back spindle (The part the actual motor is attached too) - did you manage to do this? did you have to take the machine apart completely to fit this?

Jun 29, 2014 | Dryers

1 Answer

Hoover dryer manual


never a good idea to run with out earth wire????
which earth wire did you remove heater or motor
if you removed the heater wire and it works
then change the heater

Jan 26, 2014 | Washing Machines

1 Answer

Hi I have a Hoover 5005D drier which was going


I USED A PIECE OF CARDBOARD WRAPPED IN DUCK TAPE TO WEDGE BETWEEN THE DOOR AND THE FRAME. IT WORKED FINE FOR THREE YEARS

Aug 05, 2013 | Hoover ACCESS DOOR-U7069/71 - 35121001

Not finding what you are looking for?
Hoover HDC6 Electric Dryer Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Dryers Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Hoover Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...