Question about Sanyo DP26649 26 in. TV
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. http://electrohelponline.blogspot.com/ Check this link too. http://remotesearch.blogspot.com/ If you see these sites by "MOSAIC" or "Magazine" view, will make surf easier.
Universal remote controls are available at most of the electronic spare part selling shops or online by Ebay or Alibaba.com.
Posted on May 16, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I went through all the Sanyo TV codes and then started entering in groups of 10. The U-verse offered 1103 i did 1100 to 1110 and it worked with 1107. Unfortunately at&T said you have to check the manufacturer which doesn't list universal codes. I was lucky on the Sanyo 18.5" LCD from Walmart using 1107!
Posted on Sep 13, 2009
This is the best solution for your problem as a 40 year experience with wires etc. Go to the source of your cable signal connector . Open it and clean the terminals with emery paper , sand the end of the cable shiny clean from corrosion , get a new barrel connectors with gold terminals if possible lengthen the ends of the cable , insert and tighten good, use thick rg-16 or rg 40 cable with good insulation ends crimped professionally with a crimpier or buy ready made , not from dollar store. Get a gold plated professional splitter if you need one or two , it will cost about 15 or more each . Make the cable runs as short as possible, using the thick good cables. If needed get a signal magnifier. From radio shack or the source etc. Connect them good and tight . Ground the splitters . Problem solved , you will get crystal clear channel 2 to 7 including 3 and 4 . Isolate the TV cable from other cables and power wires. Vitally
Posted on Apr 15, 2010
I found an AC adapter for the Sanyo CLT2054 on ebay that works GREAT!!
The ebay dealer is cenyglobal, specify "Sanyo-Right-4Pin-12V5A"
AC Adapter. Price is ONLY $14.99 + $4.99 shipping.
The problem is that the CLT2054 TV has "2" different power plug hookups.
When you look at the 4-pin connector with the flat side UP, for my TV, 12V is on the RIGHT 2 pins. On the other versions12V is on the TOP 2 pins.
HOPE THIS HELPS!!
Posted on Oct 05, 2011
Its 50-50 at best that it will program or work.
Another option is take the bad remote to a repair shop--where I work we fix most of them and usually under 20 dollars.
Posted on May 29, 2012
Tips for a great answer:
Apr 03, 2014 | Sanyo DP26649 26 in. TV
Feb 25, 2013 | Sanyo Televison & Video
May 12, 2012 | Sanyo Televison & Video
Aug 21, 2011 | Sanyo Televison & Video
Jan 02, 2010 | Sanyo DS27930 27" TV
Jun 18, 2017 | Sanyo DS31590 31" TV
Sep 19, 2009 | RCA Universal Remote Control
Nov 17, 2007 | Hitachi 50UX26B/27K 50" Rear Projection...
Sep 13, 2007 | Sanyo DS13204 TV
Jun 11, 2007 | Sanyo DS20930 20" TV
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: