Question about Samsung CLX2160 Multifunction Color Laser all-in-one Printer
There is a message on the machine that the transfer roller need to be replaced. where is it situated and how do I replace it?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have a CLX-2160N and have just emptied my own waste toner container. (Disclaimer: not sure how toxic or environmentally friendly this is).
Emptied carefully and thoroughly (fine dust). Immersed in bowl of warm soapy water, and vigorous shaking to get nice and clean.
Shook all water out well, and dried off as much as possible. Reinstalled. Turned printer back on. Hey presto - seems happy.
Posted on Apr 17, 2009
You need to enter the hidden engineer menu: turn the printer off then turn on again whilst holding down the enter key on the control panel. It should say something like EDC menu on the display and you can scroll through several menus to find the one about resetting counters. Be careful not to play with other options as you can screw the printer up if you don't know what you're doing!
Posted on May 06, 2009
When this happened, I took the tank out and shook it out into a garbage can (do this outside and be very careful not to breathe the dust). I then took a shop vac and held the hose at the opening while blowing compressed air into the tank. Wiggle the air nozzle around and you'll get out 99% of the toner. Pay extra attention to the sensor optics (plastic bulges on the sides of the tank).These need to be clean since the printer knows when the tank is full because the toner blocks light shining from one side of the tank to the other
Reinstall the tank and be sure it is fully inserted. If they printer is still on, turn it OFF. Close the front door of the machine and turn it back on.
Posted on Jun 15, 2009
Tips for a great answer:
Mar 09, 2014 | Samsung CLX-6200FX Printer
Mar 30, 2013 | SAMSUNG CLX-3185FW COL LASER MFC Projector...
Aug 29, 2012 | Samsung CLX-3185FW MFC / All-In-One Color...
Nov 23, 2011 | Fuji Xerox Phaser 3155 Laser Printer
Oct 18, 2011 | SAMSUNG CLX-3185FW COL LASER MFC Projector...
May 22, 2011 | SAMSUNG CLX-3185FW COL LASER MFC Projector...
Dec 03, 2010 | Samsung CLX 3160fn All-In-One Printer
Oct 04, 2010 | Samsung CLX 3160fn All-In-One Printer
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: