Question about HP Officejet 4315 All-in-One Printer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If printing from computer windows base
The all-in-one will reproduce many colors exactly; however, it is normal that some colors may be slightly different in shade or hue. If the colors are more than slightly off though, there is a problem. Review the information below to correct the problem:
** and chances if you are printng from computer might not have an option to print draft B and W, just check for quality.
Hope this helps, if it does pls dnt 4get to rate solution, thanks!!
Posted on Apr 14, 2008
To get back online of your printer, go to Control Panel and Select Printer & Faxes then OPEN.
A list of Printer is on the browser, point the printer with your mouse then right click on your Printer HP OfficeJet to select Printer Offline and click it to go back Printer Online. Good luck!
Posted on Aug 04, 2009
I identified this issue with my Officejet 6110xi All-in-One as firmware corruption. Attempting to install the supplied firmware update gave the error that "no hp device connected to the computer would benefit from it at this time." Attempted to power down the printer using #9 keystroke and got "FULL RESET" message, but problem of extremely slow printing and erratic behavior of the print heads persisted. I solved the problem by putting the printer outside in cold weather for two (2) days. This frequently resets firmwares with software corruption back to their embedded EEPROM state. Hooked the printer back up and worked fine. If cold weather is not available you could try other creative methods of cooling the device, just use a plastic bag and with ideally some drying packets thrown in to prevent excessive moisture buildup in the cold environment. The colder it is the faster the firmware resets.
-Paul Ronco, Computer Technician
Posted on Jan 25, 2010
If you have full installed HP program that came with Printer then you can find Ink Level using HPTool Box utility.
another way is find out is that if your prints are comming light then its time to refill or buy new toner.
Third way is to judge by Toner weight. if low weight means also there is low ink.
Posted on Mar 20, 2010
Tips for a great answer:
Jun 12, 2014 | HP Officejet 4300
Apr 09, 2014 | HEWLETT-PACKARD Officejet 4500 All-in-One...
Apr 09, 2014 | HEWLETT-PACKARD Office Equipment &...
Mar 09, 2010 | Office Equipment & Supplies
Jan 14, 2010 | HP Officejet 4355 All-In-One InkJet...
Jun 25, 2009 | HP Officejet 4315 All-in-One Printer
Oct 08, 2008 | HP Officejet 4355 All-In-One InkJet...
59 people viewed this question
Usually answered in minutes!