Question about 1993-1997 MAZDA MX6 PRIMERED HOOD STEEL PANEL ASSEMBLY 2DR 1994

1 Answer

Why wont my 1994 Mazda mx6 ls wont start up, wont spark, just turns over, WHY?

So here's whats up, I was driving and hear a strange sound, it wasn't loud just a faint sound not sure what it was. Then I tried to give it gas and rps dropped in the low hundreds. I pulled over and it was running rough, could barely get it into first gear without it essentially seeming to die anytime I gave it gas. I cut it off and did a quick roadside check, which no conclusion. I attempted to restart the car, and after a few rough attempts it started and I crawled back home in first without pressing the gas pedal. The next day, the car wont start. I checked for fire to the sparkplugs, and no sparks. The car will try to start but just isn't getting spark. I did the wire trick to get the "codes" from the flashing engine light by doing this: [URL=http://s299.photobucket.com/user/spyfox44/media/20140515_173850_zps8a40a1bf.jpg.html][IMG]http://i299.photobucket.com/albums/mm313/spyfox44/20140515_173850_zps8a40a1bf.jpg[/IMG][/URL] Then I video recorded the engine light flashing "code" and it flashes 8 times and some after that, which I don't know what that means: [url=http://youtu.be/hRwsyuxVF3E]1994 Mazda mx6 wont spark/start codes - YouTube[/url] I think it may be the Ignition control module, but I guess that's depending on this code. Thanks for the help, Matt

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 218 Answers

Before trying to start any further, you need to remove the timing belt cover and make sure the timing belt hasn't jumped or broken. That's the first place I'd look. Hope this helps

Posted on May 16, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

96 mazda mx6 buzzing sound when tryng to start will not turn over has new starter and battery


No Crank, No Start Diagnosis - EricTheCarGuy - YouTube

? 12:22
https://www.youtube.com/watch?v=BrqkhZmDnHQ
Feb 26, 2012 - Uploaded by EricTheCarGuy
Visit me at http://www.ericthecarguy.com/ Whenever you have ano start condition when attempting to start your ...Missing: mx6

Why My Car Won't Start? - Reasons and Solutions

www.myautorepairadvice.com/car-wont-start.html
Before I even put the key into the ignition I hear a clicking noise on the right side ...Everything is turning over, but my car won't start. ... I just replaced the starter, battery, and alternator on my 1994 Nissan Sentra. ... (1998 Mazda Millenia 2.5L) ... This is the second time this has happened, and both times I started the jeep to ...Missing: mx6

How To Diagnose A No-Start ' DSMtuners

www.dsmtuners.com > ... > Articles: Miscellaneous

Mar 4, 2006 - 2 posts - ‎2 authors
Diagnosing a No-Start I've been seeing a lot of No-Start related ... II - The car cranks, but just won't start. ... Stock fuel pumps will emit a faint buzzing or whining noisewhen they ... You'll hear the clicking each time the injector fires. .... You'll want to check that spark is getting to the engine as its turning over.Missing: mazda ‎mx6

Hard Starting, Any Advice? - Mazda626.net



Jan 31, 2016 | Mazda Cars & Trucks

1 Answer

Remove ac expansion valve on mazda mx6 1995 ls


A/c system must be emptied and reclaimed. takes a recycling/charging station to perform this. you must seek a repair shop licensed for refrigerant handling to comply with federal law. discharging refrigerant is done by specially trained and equipped persons. then its a simple thing for them to do for you

Mar 28, 2013 | Air Conditioner Expansion Valve for...

1 Answer

I have a 93 Mazda mx6 Ls... Everytime I step hard


When my MX6 was doing this it turned out to be an hydraulic leak from the clutch master cylinder, which runs on the same fluid reservoir as the brakes. Clutch master cylinder replaced and all good again!

Apr 10, 2012 | 1993 Mazda MX-6

2 Answers

If 1993 mazda mx6 does not start and there is no electricity inside of car what is wrong?


hi this sounds like the battery is flat, get it checked out it might need replacing hope this helps

Dec 06, 2010 | 1994 Mazda 626

2 Answers

1997 mazda mx6 v6engine the front axle onthe


They are supposed to come out. Any chance of removing the other Axle and seeing if the axle can come out by driving it out with a punch and hammer?

Feb 25, 2010 | 1995 Mazda MX-6

1 Answer

94 mazda mx6 wont start,getting fuel, got spark, what could it be?


First check your air flow to your intake. To have combustion you gotta have fuel, spark, and air. Also check your MAF (Mass Air Flow Sensor) This is located just before the intake. If its not this, your engine timing may be off.

Jan 07, 2010 | 1994 Mazda MX-6

1 Answer

Car wont start


being 94' im sure it has high miles, cam and crank sensor common to fail over time do to wear and heat exposure. check the basic, make sure you getting fuel and sparks. fuel pump only work as long the engine is turning over due to the crank sensor sense the flywheel turning. crank sensor may be faulty. no sparks, check coil make sure is good and putting out 12v, auto zone can test it for free. good coil, than check cam sensor, cam sensor senses the cam turning and tell the ecu to tell the coil to disperse the sparks to the plugs. cam and crank sensors, there no way of testing it but replacing the unit unless you have the special equipment to test it; both is fairly cheap to replace, check ebay.

Oct 24, 2009 | 1994 Mazda MX-6

3 Answers

1994 mazda mx6 problems


It has a transmission problem. take it in for a scan. That should reveal the possible causes too.

Rate this

Mar 20, 2009 | 1994 Mazda MX-6

1 Answer

Help 94 mazda mx6 v6. wont start, got spark , getin gas, in time, need help please.


search for MX6 HEI conversion, should solve your problem for $50.
Ed

Sep 23, 2008 | Mazda MX-6 Cars & Trucks

1 Answer

Mazda mx6


did you try replacing the ignition module?
every time that happened to me, it was exactly that. I have found an inexpensive way of repairing this.

Jul 27, 2008 | 1993 Mazda MX-6

Not finding what you are looking for?
1993-1997 MAZDA MX6 PRIMERED HOOD STEEL PANEL ASSEMBLY 2DR 1994 Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top CARPARTSDEPOT Vehicle Parts & Accessories Experts

Danny

Level 2 Expert

152 Answers

SriPhi

Level 2 Expert

327 Answers

Timllfixit

Level 3 Expert

2210 Answers

Are you a CARPARTSDEPOT Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...