Question about Gestetner Aficio 1035/g/p, 1045/g/p Universal For 3502/p , 4502/p 885247gen
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Please check after replace the continuity the expo lamp,expo thermofuse.The E codes are displayed in the copy counter.To display both digits of the E codes press the enter key.
E 11 - Exposure lamp error.Possible cause: expo lamp open,expo thermofuse open,power supply defective,main board defective.
E 12 - Exposure lamp error.Posible cause:AC drive board defective,main board defective.
E 13 =Zero cross signal error.Possible cause:main board,power supply defective,zero cross line open or the conector on the main board is not conected correctly.
For reset turn ON/OFF the main switch unplugged wait 10sec and turn ON or:turn ON the main switch,turn DIP switch 101-1 ON/OFF and turn the main switch OFF/ON.The DIP switch is located in the rear parts into the main board.
Posted on Sep 20, 2009
SOURCE: Gestetner 2822 error code e-5
i got a strait black thin line on left marging of paper. i think margin setting of my Gestetner 2822 has been changed. but i don't know how to fix this problem. (107-C, ???)
Posted on Feb 15, 2010
In your machine (model) you have to enter in SP mode to reset your error code.
1-0-7 on the key pad
Red key at least 3 sec.
Press "copy sp"
On the key pad press 5 810 and #.
Exit all the way out.
Turn the machine off and on.
Posted on Mar 01, 2011
Tips for a great answer:
May 23, 2014 | Canon Imagerunner 2525
Oct 14, 2012 | Gestetner Aficio 1035/g/p, 1045/g/p...
Mar 17, 2011 | Computers & Internet
Nov 06, 2010 | Gestetner Office Equipment & Supplies
Nov 02, 2010 | Gestetner Office Equipment & Supplies
May 22, 2010 | Gestetner Office Equipment & Supplies
Apr 22, 2010 | Office Equipment & Supplies
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: