Question about Panasonic PV-GS300 Mini DV Digital Camcorder
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the "dv sensor"is actually a mechanical lever built into the cassette housing that moves the reel tables to match the reel spacing on mini or full-size DV tapes. check to see if this assembly is free to move. if it binds up, the reel tables may not move as far as they need to, and can cause problems similar to the one you're seeing. to inspect the mechanism, you need to remove the cassette housing. if you don't have a service manual, get a tech to help -- it's a delicate procedure for the inexperienced.
Posted on Oct 26, 2007
Dear FixYa customer,
There can be several reasons for the tape spitting back out including, a defective tape, foreign object/lablel in the cassette compartment, unit in timer recording with tab knocked out on tape and then actual mechanical and electrical faults.
I will concentrate on the mechanical and electrical faults here, since you can verify the others.
Electrical, would include the Power supply, and Micro processor circuits.
A weakened power supply due to deterioration of the filter components will kick the tape out if the power supply voltage drops below a certain value. The filter components deteriorate with age and heat, and then put out less voltage.
There are critical timing circuits, and sensors that control the mechanism positioning and send signals to the Micro processor. The tape in sensor, mode switch, and LED are common faults here.
Mechanical faults include the Cassette Loading Assembly, Capstan, and Drum motor. A fault in the casseette housing assembly that won't allow it to load 100%, a Drum or Capstan motor that is sluggish or frozen will send a signal to he CPU to kick the tape back out.
The Power Supply is a common failure.
An experienced technician can verify the power supply voltages and replace the filter components for approximately $25.00 plus labor.
Thank you for using FixYa
Posted on May 15, 2010
Tips for a great answer:
Sep 24, 2014 | Panasonic Video Cameras
Jul 09, 2011 | Canon XL2 Mini DV Digital Camcorder
May 16, 2011 | Panasonic NV-DS60 Mini DV Digital...
Mar 22, 2010 | Canon XL1S Mini DV Digital Camcorder
Sep 25, 2009 | Panasonic Palmcorder PV-GS14 Mini DV...
Apr 27, 2008 | Sony Handycam DCR-HC30E Mini DV Digital...
Jun 12, 2007 | TDK DVM60 60 Minutes Mini DV AY-DVMCLC 5...
Oct 06, 2017 | Panasonic PV-GS300 Mini DV Digital...
Jun 29, 2011 | Panasonic PV-GS300 Mini DV Digital...
Nov 02, 2017 | Panasonic PV-GS300 Mini DV Digital...
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: