Question about RCA P60921 60" Rear Projection Television

1 Answer

Green bowed on screen

The picture was perfect and all of a sudden the green being bowed at the top and Bottom of the screen, I am unable to bring it back with the auto convergence or the manual convergence. From what I have read it is most likely the IC on the CG board, I am familiar with componet replacement and have ordered the part. I have seen some other post about fuses, for some similar models, I would like to know if there is anything else I should be checking or replacing when I replace the IC.

Posted by on

  • Anonymous Dec 02, 2007

    green bow on top of screen. can't get coverege to line up.

  • Anonymous Jan 16, 2008

    Same problem, except my blue is the one that is bowed. Alignment tool doesn't help.

    I've had the TV for over 4 years and never a problem. I've only run the Auto Alignment tool for evaluation purposes, never to correct a problem.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have basically the same problems. Have yet to fix yet but from information I have gathered it seems that all points to the convergence chips.

Posted on Feb 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 52" RCA P52937SG screen bows on the top and on

What you are describing can be due to a number of different settings.

Focus on the red and green guns
Sharpness on the red and green guns
Horizontal position and size
Vertical position and size.

Please consult a professional for adjustment on these items as they are all near or connect to parts that have Hazardous Voltage.

Mar 22, 2011 | RCA P52937 52" Rear Projection Television

1 Answer

Looks 3D

I had a repairman replace the convergence boards. The picture is fine now however red & green colors are messed up.

Nov 11, 2008 | Samsung HCN653W 65" Rear Projection...

1 Answer

Cheap Fix?

I will strongly advise you to replace the two STK392-120 as a pair. and this will cure your bowing picture problem. You may need to re-converge your set. best of luck.

Nov 05, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Pt-47wx49e convergence problem

I just replaced the 2 convergance chips, but it did not seem to fix the problem. I then tested all the resistors that feed the convergence chips anf there was a 2.2 ohm fusable blown. IT was R7050 on mine. That seemed to fix it so that I could adjust all the colors through the convergence 2 screen. There seems to be a slight bow near the bottom when you look at the c2 screen, but not noticable when you are watching a picture. Since I got this broken, I am not sure how perfect it should be.

If anyone can send me the service manual, I would appretiate it. Thanks.

Oct 10, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Double focused, red and green, bow in picture top and bottom

You have a convergence problem
If the set has auto focus and will not complete its cycle.
The Auto focus module is bad, (expensive)
If it completes and the problem is still there.
Then check for bad conv. drivers (stk****) or cold solder joint on one or more of the 3 drivers pins.

Jul 08, 2008 | Hitachi 65S700 65" Rear Projection HDTV

1 Answer

Rca tv r52wh73 the picture is bowed at the top and bottom also the colors red green and blue wont match together as one picture

rca t v r52wh73 the picture is bowed at the top and bottom also the colors red green and blue wont match together as one picture

Apr 05, 2008 | RCA Televison & Video

2 Answers

Screen is bowed (top and bottom) Color has a green and purple tint?

Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from and do the repair yourself. Its a fairly easy DIY fix.
Here is an example video

utube.png You-Tube video "9oI1Nzq7CR8" placeholder (do not delete) utube.png

Jan 15, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer


you have bad convergence ics

Apr 13, 2007 | Toshiba TP61H60 61" Rear Projection...

Not finding what you are looking for?
RCA P60921 60" Rear Projection Television Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75017 Answers


Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides