Question about Frigidaire DGHF2360PF Gallery 22.6 Cu. Ft. French Door Counter-Depth Refrigerator

1 Answer

How to reset the order filter feature

We've had this frig for 3 weeks and its saying we need to order a filter. how to reset that light

Posted by Anonymous on

Ad

1 Answer

  • Official Brand Answer
  • 2,267 Answers

Good Afternoon Friend,

I understand that the order filter light is showing on your Frigidaire refrigerator, model# DGHF2360PF, and you want to know how to reset it. What you will need to do is press and hold the Water Filter button on the Ice & Water Dispenser control panel for three seconds. When the display changes from Red to Green, the status has been reset. I hope this is helpful.

-Best regards-
WP

Posted on May 16, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Need schematic Amana frig SQD25VW-P1314202WW


Hello Ron Carlson

Page 6 of 6...

Pretty straight forward refrigerator!

Although I agree with the first answer you got from Todd Marr...a lot of available volunteers here have been around a lot of blocks...
Can call out the Whirlpool & Frigidaire units you share parts with... and how to very cheaply you can
test various parts to bring you to your very quick victory...

I'm just saying, ice-maker, defrost issues, warm refrigerator side... Fast frost build-up... puddles?

If you'll pardon the pun ...
FROST FREE REFIGERATOR/FREEZERS are pretty cool...!

Amana SCD25TBW Technical Information Wiring Diagram

Apr 06, 2016 | Amana Refrigerators

Tip

How to Reset Your Water Filter Light


<b>Amana:<br /></b> <ol> <li>Press and hold the <b>dispenser lock</b> and <b>auto light</b> buttons on the dispenser for 4 seconds until the filter status indicator begins to flash, then release the buttons.</li></ol>or<br /> <ol> <li>Press and hold the <b>dispenser lock</b> and <b>water</b> buttons for 4 seconds until the filter status indicator begins to flash, then release the buttons.</li></ol>or<br /> <ol> <li>After replacing the water filter, press and hold the Reset Filter pad for 3 seconds. The Order and Replace indicator lights will blink and then go off when the system is reset.</li></ol><span style="font-weight: bold;">Brita:</span><br /> <ol> <li>Press firmly and hold start button for 5 to 10 seconds.</li> <li>Four bars will appear in the display, one after the other, and flash. Do not release the start button until the 4 bars appear and start to flash. If you have difficulty pressing the start button, a capped ballpoint pen may be used to press the button down.</li> <li>A small flashing dot in the lower right corner shows the indicator is working.</li> <li>Every 2 weeks a bar automatically disappears. When only 1 bar remains make sure you have a new filter on hand.</li> <li>After 2 months, when all bars have disappeared, an arrow will flash at the top of the display reminding you to change your filter. </li></ol><b>Frigidaire<br /></b> <ol> <li>Press and hold the <b>reset </b>button on the dispenser until the green light flashes (up to 15 seconds).</li></ol><b>GE:<br /></b> <ol> <li><b>P</b>ress and hold the <b>reset water filter</b> button on the dispenser for 3 seconds.</li></ol>or<br /> <ol> <li> Press the reset button on the dispenser for 4 to 8 seconds then release. </li></ol><b>Hotpoint:<br /> </b> <ol> <li><b>P</b>ress and hold the <b>reset water filter</b> button on the dispenser for 3 seconds.</li></ol> <b>Jenn-Air:<br /> </b> <ol> <li>Press and hold the <b>lock</b> and <b>light</b> buttons (<b>lock and water</b> on newer fridges) on the dispenser for about 4 seconds, until the indicator light blinks.</li></ol><b>Kenmore:<br /></b> <ol> <li>Press and hold the button next to the filter light for 10 seconds.</li></ol><b>KitchenAide</b>:<br /> <ol> <li>Press the <b>light</b> switch 5 times within 10 seconds. If the fridge has a <b>filter button</b>, press and hold it for 5-10 seconds.</li></ol><b>LG:<br /> </b> <ol> <li>Press and hold the <b>reset</b> button for 3 seconds.</li></ol><b>Magic Chef</b> <br /> <ol> <li> Press and hold the light and lock pads until the change filter light flashes. (approximately 3 seconds)</li></ol> <b>Maytag:<br /></b> <ol> <li>Press and hold the <b>lock</b> and <b>light</b> buttons (<b>lock and water</b> on newer fridges) on the dispenser for about 4 seconds, until the indicator light blinks.</li></ol>or<br /> <ol> <li>Press the refrigerator's light switch five times within ten seconds.</li></ol><b>Samsung:<br /> </b> <ol> <li>Press the <b>ice type</b> and <b>child lock</b> buttons simultaneously for 3 seconds. NOTE: Hold the buttons for only 3 seconds. If you press these 2 buttons simultaneously for 5 seconds, the reset function ceases.</li> <li>Release the buttons and repeat the same step one more time. The water filter indicator light should turn green.</li></ol>or<br /> <ol> <li><span>Press and hold the "Alarm/Hold" button for 3 seconds.</span></li></ol>or<br /> <ol> <li><span>Press and hold the <i>Fridge </i>and <i>Power Cool</i> buttons for 3 seconds.</span></li></ol><b>Whirlpool</b>:<br /> <ol> <li>Press the <b>light</b> switch 5 times within 10 seconds. If the fridge has a <b>filter button</b>, press and hold it for 5-10 seconds.</li></ol>

on Jun 17, 2011 | Refrigerators

1 Answer

Filter light on


Water Filter Status Light and Filter Reset
The filter reset control allows you to restart the water filter status
tracking feature each time you replace the water filter. See "Water
Filtration System."
After changing the water filter, reset the status light. Press the
OPTIONS button to enter Options mode, then press LOCK to
initiate the reset, then press MEASURED FILL to confirm that
you want to reset the status light. When the system is reset,
the "Order" and "Replace" icons will disappear from the
display screen.
These instructions can be found in the=> GZ25FSRXYY2 User Manual . As for the dispenser and ice dispenser problem this could be related to a loose connection in the door where wiring attaches to control panel and/or where door wires go from door to cabinet also a defective pressure switch where glass is pressed to get water or ice. Can you tell me when this additional problem began?
I am here should you need me, Thanks John Tripp Appliance 911

Apr 21, 2014 | Whirlpool Refrigerators

1 Answer

Kenmore 795 continually blowing cold air into frig


If the control will not change and the lock is lit, first try unlocking it. Press and hold the lock tab for 3 seconds. If nothing happens, try unplugging the power cord for 30 seconds and reconnect it. This will reset the board.

Nov 02, 2012 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

Whirlpool Frig/Freezer - Frig side too warm at 60 degrees


Check for another fan to cool the fridge side. It could be bad.
murf427

Aug 01, 2012 | Whirlpool Refrigerators

2 Answers

How do i reset the waterfilter light


WATER FILTER CHANGE REMINDER

(Select Models)

For some refrigerator models featuring

water filters, the Water Filter Change

Reminder function monitors the life of the

filter and provides a reminder when it is time

for the filter to be changed.

When the system detects either 12 months

of usage, or the filtering of 416 gallons of

water (whichever comes first), the CHANGE

FILTER indicator light will illuminate. This

indicates that the water filter should be

changed and the light reset.

To reset CHANGE FILTER light: Press and

hold the LIGHT and LOCK pads until the

CHANGE FILTER light blinks (approx. 3

seconds). The control is now reset for 12

months or another 416 gallons.

Note: The Water Filter Reminder will

operate if the filter bypass is in place.

If you have other questions please let me know, Thanks Sea Breeze

Jun 10, 2011 | Jenn-Air JCD2389G Side by Side...

1 Answer

Changed water filter and bushed lock & water buttons, red light went off but green light and other indicator lights (crushed ice, cubes, night light) did not work. Removed new filter & put . .back...


Below are instructions to reset water filter light. Thanks, Sea Breeze
If helpful please rate.

Reset Filter (select models)

When a water filter has been installed in the

refrigerator, the yellow Order light will illuminate when

90 percent of the volume of water for which the filter is

rated has passed through the filter OR 11 months have

elapsed since the filter has been installed.

The red Replace light will illuminate when the rated

volume of water has passed through the filter OR 12

months have elapsed since the filter was installed. A

new filter should be installed immediately when the

Replace light is illuminated.

After replacing the filter, press and hold the Reset

Filter pad for three seconds. The Order and Replace

lights will go off.

Vacation Mode

The Vacation Mode feature causes the freezer

to defrost less frequently, conserving energy. The

Vacation Mode indicator light will illuminate when the

feature is activated. To deactivate, press the Vacation

Mode pad again OR open either door. The indicator

light will go off.
Temp Alarm

Apr 22, 2011 | Amana 22.6 cu. ft. Side-By-Side...

1 Answer

How do you set an aeo watch from american eagle?


press mode 3 times then press start. this will reset the seconds, then press reset to change another feature in this order : Minutes, Hours, Day, Month, Day of the week. press mode to end the editing prosses at any position

Dec 23, 2010 | Watches

1 Answer

Water filter warning light has come on


Hello. When the water filter warning light comes on it is time to replace the water filter. Once the filter is replaced you will have to reset the warning light. To do that Hold the Lock/Unlock Button and the Water Dispensing Button for (3) Seconds. The Change Filter Light will Blink and Reset. Joe

please rate my answer as very helpful. Thanks.

Apr 21, 2010 | Maytag MSD2756GES Side by Side...

2 Answers

Reset water filter light


WATER FILTER CHANGE REMINDER
(Select Models)
For some refrigerator models featuring
water filters, the Water Filter Change
Reminder function monitors the life of the
filter and provides a reminder when it is time
for the filter to be changed.
When the system detects either 12 months
of usage, or the filtering of 416 gallons of
water (whichever comes first), the CHANGE
FILTER
indicator light will illuminate. This
indicates that the water filter should be
changed and the light reset.
To reset CHANGE FILTER light: Press and
hold the LIGHT and LOCK pads until the
CHANGE FILTER light blinks (approx. 3
seconds). The control is now reset for 12
months or another 416 gallons.
Note: The Water Filter Reminder will
operate if the filter bypass is in place. Let me know if you need the complete manual, Thanks, Sea Breeze

Apr 16, 2010 | Maytag MZD2766GES Side by Side...

Not finding what you are looking for?
Frigidaire DGHF2360PF Gallery 22.6 Cu. Ft. French Door Counter-Depth Refrigerator Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

Are you a Frigidaire Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...