Question about Lexmark Office Equipment & Supplies

Open Question

Lexmark Pro710- Printhead Error1 There is a problem with the printhead. I consulted the user guide which is no help.

I noticed that the magneta color does not click in place. I jammed a toothpick in to tighten the connection and the printhead error still comes up. What do I need to do?

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
printmastert
  • 3344 Answers

Creating Customers For Life

    Verified Fixya Pro

    SOURCE: I have a lexmark prospect

    Updating the firmware for your Lexmark Pro200 series will help fix this problem. You will need to get rid of the error first before you can successfully update your printer. Follow these steps: 1. Open the cover of the printer > Remove the printhead. If the printhead will not go to the center, turn off the printer and pull the printhead to the center. 2. Once you have the printhead removed, close the cover of the printer and turn on the printer. 3. It will ask you to "Open Cover to Install the Printhead". Press the Cancel (Red X) button. 4. It should take you back to the "Copy" menu. 5. Proceed with the firmware update. Just go to http://bit.ly/p205fw. There'll be more than one download for your model, try the top download first. 6. Once the firmware update is successful, reinsert the printhead by following the steps on your printer screen.
    Source: There is a Problem with the Printhead

    Posted on May 24, 2011

    Ad
    • 1 Answer

    SOURCE: printhead problem for dell v715w printer It reads

    You can download the guide from the Dell site... but don't waste your time. The printhead has a burned-up jet, and Dell charges as much for a printhead as for a whole new printer; just called them with the same problem. Cleaning it will most likely NOT help. The printheads are available on Amazon for around $55US. The printer is an awful ink-hog, and has terrible reviews on Amazon. Basically: open the top (below the scanner lid) and the printhead will center itself in the access hole. Pop the two ink cartridges out. There is a tab on the frame that carries the ink cartridges, towards the front of the printer; pull this (or push?) a little and lift the arm up (pivots at the rear.) The printhead will lift out (do so from the rear, where the ink latches are... it comes out easier this way.) Invert the printhead... you'll probably see four shiny gold "ribbons," one of which will be blackened. You can try wiping a lint-free cloth across this (coffee filters work well), but don't be surprised if this fails to help. I'm already shopping for it's replacement; last Dell product I'll ever own. They are an awful company to deal with.

    Posted on Oct 01, 2011

    printmastert
    • 3344 Answers

    Creating Customers For Life

      Verified Fixya Pro

      SOURCE: my lexmark intuition s505 has a printhead error

      It sounds like a problem with the printhead. If your printer is still under warranty, please contact our technical support team to have the printhead replaced. You can find the contact details at support.lexmark.com.

      If it's already out of warranty, you can purchase a printhead here: http://bit.ly/IZYhWo

      Posted on Dec 10, 2012

      printmastert
      • 3344 Answers

      Creating Customers For Life

        Verified Fixya Pro

        SOURCE: printhead problem

        It sounds like a problem with the printhead. If your printer is still under warranty, please contact our technical support team to have the printhead replaced. You can find the contact details at support.lexmark.com.


        If it's already out of warranty, you can purchase a printhead here: http://bit.ly/IZYhWo

        Posted on Dec 10, 2012

        Add Your Answer

        Uploading: 0%

        my-video-file.mp4

        Complete. Click "Add" to insert your video. Add

        ×

        Loading...
        Loading...

        Related Questions:

        1 Answer

        Printhead replacement


        If all of your cartridges are good and full of ink and you have done all to clean and still cannot get printer to print a test page then your print head is fubar and in need of replacement. Not cheap and often better to get new printer than replace the print head.

        Sep 08, 2017 | Dell V313w AllInOne InkJet Printer

        1 Answer

        My lexmark intuition s505 has a printhead error


        It sounds like a problem with the printhead. If your printer is still under warranty, please contact our technical support team to have the printhead replaced. You can find the contact details at support.lexmark.com.

        If it's already out of warranty, you can purchase a printhead here: http://bit.ly/IZYhWo

        Dec 02, 2012 | Lexmark Intuition S505 - multifunction ...

        1 Answer

        Printhead problem


        It sounds like a problem with the printhead. If your printer is still under warranty, please contact our technical support team to have the printhead replaced. You can find the contact details at support.lexmark.com.


        If it's already out of warranty, you can purchase a printhead here: http://bit.ly/IZYhWo

        Dec 02, 2012 | Lexmark Intuition S505 - multifunction ...

        1 Answer

        Message comes up printhead error consult user manual,please advise what to do thank you


        You may have been impacted from a printhead issue affecting a limited number of our devices. Please visit the Lexmark support page to determine if your printer is affected with the printhead issue. You will be asked to enter your model and serial number. Also, make sure your printer is updated. The firmware update will help give you a highly reliable print system.



        Click here to validate your serial number and/or update your firmware.

        Sep 24, 2011 | Lexmark Prospect Pro205 Wireless...

        1 Answer

        Problem with the printhead, I can not do it nothing, I had read the manual, but nothing help, a soon you connect the printer said: "There is a problem with the printhead. Please consult User's...


        Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.


        However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275 or point your browser to http://bit.ly/lFKDzs for online technical assistance.

        Aug 19, 2011 | Lexmark Interpret S405 Wireless All-in-One...

        1 Answer

        It keeps saying that there is a problem with the printerhead. please consult users guide


        The error could be due to an outdated firmware version or a poor connection between the printhead and carrier contacts. Follow the steps below to fix the problem:
        1. From the printer control panel, press the Setup button > Maintenance > Replace Printhead, or for touchscreen panels, touch Ink Levels > More Options > Replace Printhead. 2. Open the printer cover. Note: If the carrier does not automatically move to the center, turn off the printer/unplug the printer from the power source and then slide the carrier to the center. 3. Press the tab, and lift the latch. Pull up to remove the printhead. Close the printer cover then turn off the printer/unplug the printer from the power source. 4. Turn the printer back on. It will ask you to "Open Cover to Install the Printhead". Press the Cancel (Red X) button or the Home icon for the touchscreen panels. It should take you back to the "Copy" menu. 5. Proceed with the firmware update. Just go to http://bit.ly/p205fw. 6. Once the firmware update is successful, firmly re-insert the printhead.
        If error continues to display on the screen even after successfully updating your printer, it could be due a faulty printhead. Please contact Lexmark Technical Support Center or visit Lexmark's website for additional assistance.

        Jun 21, 2011 | Lexmark Prospect Pro205 Wireless...

        2 Answers

        Lexmark c782 ps printer has printerhead error..108.10


        hi
        If this is the firsttime the error has occurred, try turning the printer off. Let it sit turned off for atleast 20 seconds before powering it back on. If powering the printer offand back on clears the error, continue using the printer but watchit to see if any printhead errors return. If your printer continues todisplay a Printhead Error message, make sure it is plugged straight tothe wall and not through a surge device or power strip. Power strips anduninterrupted power supplies can cause a low amperage problem in your printer.This can trigger a printhead error even if the printer has worked on this surgedevice for months.
        If theprinter continues to post a 930 Printhead Error, it thinks thewrong printhead unit is installed. If the printer was recentlyserviced, make sure the correct parts were used. This is especially true if theparts replaced were either the printhead unit or the printer's engine/systemboard. It is in one of these two parts that the printer is detecting theproblem. Note: If you are the personrepairing such a printer, please be aware that parts from different,though similar, printer models may not be compatible with this printer.Also make sure to check the laser cable going from the printer's engine boardto the printhead unit, as it reads that signal. If the printer was notrecently serviced before this error occurred and powering the printer off andon does not help, the printhead unit and possibly the laser cable or theengine/system board to this printer may need to be replaced.
        If the printer continues topost a 931 Printhead Error, it thinks there is an error in the signalgoing to the laser or the Hsync part of the printhead assembly. If the printer continues topost a 932 Printhead Error, it thinks there is an Hsync error occurringin the printhead assembly. If the printer continues topost a 933 Printhead Error, it thinks there is a failure in either theHsync signal or with the mirror motor unit of the printhead. If the printer continues topost a 934 Printhead Error, it thinks there is a "lock"failure with the mirror motor assembly within the printhead assembly. If the printer continues topost a 935 Printhead Error, it thinks the mirror motor unit within theprinthead unit cannot reach its operating speed.
        If powering the printer offand on does not clear any of these errors and it is alreadyconnected directly to the wall, your printer may require service. Itcould have a defective printhead unit or there might be a problem with theengine board or one of the printhead cables. Note:If you are the person repairing such a printer, check all of the cablesgoing from the printer's engine board to the printhead unit for any damage.Also check the continuity across these cables.

        May 31, 2011 | Lexmark Office Equipment & Supplies

        1 Answer

        I have a lexmark prospect pro 200 series printer and there is an error message that reads "There is a problem with the printhead. Please consult User's Guide."


        Updating the firmware for your Lexmark Pro200 series will help fix this problem. You will need to get rid of the error first before you can successfully update your printer. Follow these steps: 1. Open the cover of the printer > Remove the printhead. If the printhead will not go to the center, turn off the printer and pull the printhead to the center. 2. Once you have the printhead removed, close the cover of the printer and turn on the printer. 3. It will ask you to "Open Cover to Install the Printhead". Press the Cancel (Red X) button. 4. It should take you back to the "Copy" menu. 5. Proceed with the firmware update. Just go to http://bit.ly/p205fw. There'll be more than one download for your model, try the top download first. 6. Once the firmware update is successful, reinsert the printhead by following the steps on your printer screen.
        Source: There is a Problem with the Printhead

        May 21, 2011 | Lexmark Prevail Pro705 Wireless All-In-One...

        1 Answer

        Message:" There is a problem with the printhead.


        Make sure your printer is updated. The firmware update, available in the Lexmark website, will help fix printhead-related problems. Follow these steps: 1. Remove the printhead from the printer.

        2. Reset the printer by unplugging the power adapter from the printer (should be the whole black box on the back of the printer), leave it unplugged for about a minute then plug it back in.
        3. Once the printer is back on, it will ask for the printhead. Just disregard the message by pressing or CANCEL button on your printer screen. Do not install the printhead yet.
        4. Then, please use this link: http://bit.ly/p705fw to download and run the firmware on your computer. Please make sure that the USB cable is attached from the printer to the computer while you do this.
        5. Once the firmware update is complete, you may reinstall the printhead.

        Apr 29, 2011 | Lexmark Prevail Pro705 Wireless All-In-One...

        Not finding what you are looking for?
        Office Equipment & Supplies Logo

        Related Topics:

        42 people viewed this question

        Ask a Question

        Usually answered in minutes!

        Top Lexmark Office Equipment & Supplies Experts

        Don  Farrell
        Don Farrell

        Level 3 Expert

        1018 Answers

        Les Dickinson
        Les Dickinson

        Level 3 Expert

        18408 Answers

        Doctor PC
        Doctor PC

        Level 3 Expert

        7733 Answers

        Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

        Answer questions

        Manuals & User Guides

        Loading...