Question about LG 32LE5300 Widescreen 32 in. HDTV
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Our LG 50" plasma tv screen went black after a popping noise but still had sound, after great diliberations decided to take the back off and have a peek!
We unplugged the tv and tested the fuses (there were three we could see) one had blown, the one on the left as you look at the back of the tv it also has one above it. We wrote the code/seriel number down and took the fuse to the electrical wholesalers Maplin and bought a pack of 10 fuses for £1.29 replaced the fuse in the tv and everything now fine!!!!!!
Hope this might be of use to anyone whose lost the picture after a loud popping/snacking noise but still has sound.
Posted on Jan 17, 2008
You shouldn't need anything plugged into the accessory jacks to get local sound from your set.
Go through the main setup menu and check audio settings; they may be set to turn off the internal speakers to send the sound to a home theatre that you apparently don't have.
Most sets have that as a selection and supply L-R audio for an external system and mute the internal speakers.
FYI: The three connectors you mention are coded as follows:
Red - right channel audio White - left channel audio Yellow - composite video (contains synchronization signals and video)
These may be input connectors (for external VCR/DVD decks) so check your owner's guide to verify.
Posted on Nov 23, 2008
Most a likely a problem with your Y-Sustain board which will then not drive the screen giving a black picture. The fuse on the board may be open circuit & need replaced but most likely you will need to have the sustain board replaced.
Posted on Oct 28, 2009
I disagree with info provided, if screen of your LG lcd tv becomes green that means inverter board is working and lcd tv does not have convergence ICs.
Please unplug tv from ac wall socket for minute to get it reset, replug back in and turn it On and check its picture.
If still showing green screen then change input source with remote, if tv shows same green screen on all inputs that means its either lcd panel problem or digital signal processor got bad loacted on main board. Local tv repairman is needed to confirm and fix it.
Posted on Jul 23, 2010
White screen may be caused by failed T-CON board or it is not getting the 12vdc or signals from the main board. Check the fuse on the T-CON board first, T-CON board is mounted under the metal shield.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx
Posted on Aug 13, 2010
Tips for a great answer:
Mar 26, 2017 | RCA Televison & Video
May 01, 2016 | LG 47LW6500 47 Inch 3D 1080p 240Hz Smart...
Jan 11, 2016 | LG 42LS5700 42 Inch 1080p 120Hz Smart TV...
Dec 21, 2015 | LG 47LN5400 47" LED TV 1920x1080, 120 Hz....
Dec 20, 2015 | LG Televison & Video
Dec 09, 2015 | LG 47LS4500
Sep 24, 2014 | Televison & Video
Mar 16, 2011 | LG 42LC2D 42 in. LCD HDTV
Sep 20, 2009 | Toshiba TP50H60 50" Rear Projection...
Oct 27, 2016 | LG 32LE5300 Widescreen 32 in. HDTV
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: