Question about Hotpoint 24 in. DWF32P Free-standing Dishwasher

2 Answers

Hotpoint Aquarius DWF31

Hi there,

We bought this dishwasher from ebay .It is 2 years old.We just done the connection .But with some reason not getting any water in ,so not washing.It has making sound like it is trying to take water in.Dishes inside still dry and washing tablet dry as well. It is not dispaying any error either.We are not sure what sort of problem might have.Please help us out we have got no idea what we should do.

Posted by on

  • Burmanator Nov 28, 2007

    Had same problem.

    Timer going down but no water being pumped.

    Checked all water hoses and all seem OK.



2 Answers

Hello Burmanator,
I had to call a angineer in the end.If your problem still going on.You can try what engineer did it.Turn the dishwasher on and press the program end button (quick wash and normal wash button in the same time). you should hear a pump out water sound.Wait until finish and display 0 again.Than swich off the machine.wait little bit than turn it on again and press a program button.If your problem is over fload device activated like mine.You shoud hear to begin working and getting water in.
It cost me £40 to bring the angineer in and press these two button.5 min.job.Good luck
I hope this information help you.

Posted on Jan 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

To isolate fault,remove bottom front panel,turn off main water,put a tray under machine, remove inlet pipe frompump at front of machine. for a second to see if you have flow that far. If so trouble is in machine. Dig the filter out of th pump entry .It could be blocked

Posted on Jan 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hotpoint DWF31 dishwasher went bang mid cycle and mild smell of burning plastic. Still powers on, lights on correct setting but stuck at 77 mins with nothing happening. Water still inside. Any ideas

Sounds like you have burnt something. May have shorted out. Shut it down and pull the plug or could maybe cause a fire. Get a professional to look at it.

Dec 19, 2016 | Hotpoint Dishwashers

1 Answer

Aquarius model dwf31. Why doesn't it clean items in top rack?

If you look at the bottom arm you will notice an extension nozzle that comes up out of the center. If you block that from going up during the wash cycle with dishes then the water will not reach the top. This is what makes the top arm spin.

Dec 24, 2015 | Hotpoint Dishwashers

1 Answer

What does an errorcode 11 mean with a Hotpoint DWF31?

Hi It says for error code 11 ambiant temp too cold , also could be a knik in a hose stopping water

Jul 26, 2011 | Hotpoint Dishwashers

1 Answer

Our Hotpoint Aquarius Dishwasher BF11, built into the kitchen units is leaking steam from the door ( and starting to cause the wooden floor to bend ). Can I get a door seal for this model ? It's probably...

you gotta send the full model number,open the door and look at the very front of dw where the door closes into the machine,usually the tag is on the left side at 9 oclock,first are you positive that's where it's leaking remove the bottom kick panel and see if the motor or anything isn't leaking there too.if it is the door gasket it's an easy fix

Oct 07, 2017 | Hotpoint Dishwashers

1 Answer

Manual for Hotpoint Aquarius dishwasher - DWF 34

you want
Hotpoint Aquarius dishwasher - DWF 34 manual no.dont wory go to how stuffworks.comyou can get all info you want.please rate it

Nov 21, 2008 | Hotpoint 24 in. HDA2000Z Built-in...

1 Answer

Hotpoint Aquarius WMA46 1300 , front loader

half loads will vibrate more than full load
check transit bolts are removed
if vibration persists, then fault is probably shock absorbers worn

Sep 07, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Problem with hotpoint aquarius fdw60 diswasher

My mother has a neighbour who has a new hotpoint dishwasher which caught fire inside (Plastic on door front melted!).

Please contact Hotpoint - if yours is new, check to see if they can replace immediately otherwise its worth booking the engineer to sort £90 - free parts on machines less than 5 years old.

Jan 20, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Hotpoint Aquarius WF530 LEDs flashing

I cannot tell from your description what the error may be but here is a list of reasons;

Jun 13, 2017 | Hotpoint Washing Machines

1 Answer

Hotpoint Aquarius Dishwasher DWF31


Jan 03, 2007 | Hotpoint 24 in. DWF32P Free-standing...

Not finding what you are looking for?
Hotpoint 24 in. DWF32P Free-standing Dishwasher Logo

902 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

77932 Answers

Brad Brown

Level 3 Expert

16802 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides