Question about Bosch 18 in. SRS45E02 / SRS45E08 Exxcel Slim-Line Free-standing Dishwasher
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is generally because of a stuck diverter solenoid. The water goes to the pump and then is either sent to the wash arms or the drain. Also, check the drain.
Posted on Feb 11, 2008
SOURCE: Error code 2H
The control panel needs to be replaced (indicated by the "2H" error code displayed at the start of the cycle).
BTW - The number 1 displayed at the end of the cycle indicates the cycle has timed out (i.e., it doesn't mean 1 minute remaining). Hence the continued running of the unit. Until you replace the control panel, you'll have to manually cancel the cycle at this point.
Posted on Jul 29, 2009
SOURCE: On my Bosch dishwasher Excell
I solved the problem, by tipping the dishwasher back about 45degrees, I think this re-adjusted the flood sensor, and it is now working fine. Thank you.
Posted on Jan 11, 2010
you have a leak,or the something has the float stuck in the open position. when water gets in the base the float raises and the uni automatically drain until the water is out of base. if this helps post a 4 thumbs up post
Posted on Feb 28, 2010
Welcome to FixYa.
Based on your description I'd say the issue is with the control...unfortunately.
The number"1" being displayed ( on models with the display like yours ) is actually an error code indicating a fault in the heating process.
Bosch has had a history of this exact problem I'm about to lay out for you and this is the first thing I'd be looking for if called out to service the unit with the symptoms you've described.
As I've alluded to the issue is likely within the electronic timer/control, specifically the heater relay solder joint. ( a faulty flow switch, ntc or heater can also cause this, but not very probable ).
My first suggestion would be calling in an authorized bosch service tech. if that is an option for you and your budget however, If you feel capable of checking this on your own, there`s a way to visually inspect the control yourself.
It will require you to remove the control from the unit and then remove the control from it`s plastic housing and look for a burnt solder contact on the printed circuit board.
The culprit will 99% of the times be one of the pins from the heater relay,
**Flip this over and inspect the solder joints, it will be obvious when you see it.**
This ones new, but it's where to look...
...hence the unit sit`s and takes longer
Posted on Sep 15, 2010
Tips for a great answer:
Oct 05, 2015 | Bosch Dishwashers
Dec 13, 2013 | Dishwashers
To activate any of the Dishwasher Options listed, follow
Open the dishwasher door far 1. enough to expose the
2. Press the On/Off button.
the MENU/OK button until the desired option appears in the display window.
4. Press the - or + button to step through the available
the desired setting is shown in the display window, press the MENU/OK button to
save the setting. The display will indicate "Value Stored" and return to the
menu. If you did not change the setting, press the start
button to return to the main
6. Select the desired wash cycle by pressing the - or +
7. Press the start button and close the dishwasher door
to begin the cycle.
NOTE: In the Options Step Down Menu, you can
return to the main menu at any time by
pressing the START button.
Feb 20, 2013 | Bosch SHX98M0 24 in. Built-in Dishwasher
Mar 16, 2011 | Bosch Dishwashers
Nov 19, 2010 | Bosch Dishwashers
Oct 10, 2009 | Dishwashers
Jun 28, 2009 | Bosch 24 in. SHU53 Built-in Dishwasher
Sep 27, 2008 | Bosch Dishwashers
Aug 21, 2008 | Bosch 24 in. SHU66C02 / SHU66C06 Built-in...
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: