Question about BroilKing Signet 20 Gas Grill

Open Question

Yellow flames on new grill - BroilKing Signet 20 Gas Grill

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust side burner on weber grills


Burner could be blocked try cleaning the burner then you should be able to adjust air mix Lpg will a bit of yellow in the flame.

Jun 14, 2013 | Grilling

1 Answer

Flame has become very yellow and lazy. I installed a new regulator, but didn't help.


try cleaning the burners sounds like they are blocked ,yellow and lazy is lack of air to burn

Dec 10, 2012 | Brinkmann Charmglow Stainless Steel LP...

1 Answer

Is this yellow flame on my grill ok?


Clean out burner holes on all the burners they look blocked , then adjust air mix to burners could need more air to burn

Jul 23, 2012 | KitchenAid KBGS364PSS Grill

1 Answer

Yellow flame


try cleaning the burner and the orffice first

Jun 10, 2012 | Weber Q100 Grill

1 Answer

Gas grill, yellow flame how do we adjust this


I've got the same grill and was having the same problem - yellow flames coming out the front vents above the knobs. I removed the four burner tubes and they were full of soot and ash. The tubes were still in good condition so I simply knocked them with a screwdriver and a ton of black soot/ash came out. All the screws that hold them in place were so corroded they were falling apart so I had to drill them out. I cleaned everything up, put it back together with new screws and it works perfectly - nice blue flames!

Apr 14, 2010 | Char-Broil Commercial Stainless Steel...

1 Answer

Yellow flame from all carryover tubes. This grill is brand new


if the unit is running on natural gas, this is not unusual. if running off propane tank something is wrong with the regulator

Jul 05, 2009 | Char-Broil CharBroil Master Flame Gas...

1 Answer

Yellow flame on the rear of my burner


Yellow is a "reducing" flame meaning low oxygen, whereas blue is an oxidizing flame. There is not enough air mixing with the gas. Clean out the pipes and free the air intake holes on the first stage of the burner assembly.

Jun 02, 2009 | Char-Broil CharBroil Master Flame Gas...

1 Answer

The gas flow cannot be raised and a slight breeze puts out the fl


The new gas grills have a safety device built into the gas hose that can cause this problem until you get familiar with it. The flame on a gas grill should be blue. If you have a yellow flame it could be caused by a couple of different problems. First of all the burner might be worn out. If you have an older grill then you should inspect the burner to make sure that there are no cracks or holes and that all the burner holes are the same size. If you have a newer grill or burner, or your burner appears to be fine then the problem might be with the regulator. The regulator is a round metal object near the connector to your gas supply. Sometimes regulators get stuck. This can reduce the gas flow, make a yellow flame and keep your grill from getting hot. To solve a stuck regulator, turn off the fuel supply to your grill. Disconnect the main connector and open the grills control value. This will eliminate any pressure on the regulator. Sometimes this will reset the regulator, but sometimes they stay stuck. Take a small hard object like the handle of a screwdriver and give the regulator a gentle tap. Now you can reconnect everything and see how your grill works now. If you still have a yellow flame your propane tank might be low, the regulator may need replacing or you could have a blockage in the venturi tubes. So check your fuel level by pouring hot, not boiling water down the side of the tank. Feel along the side where you poured the water. The propane level is where the tank feels cold. If you have plenty of fuel, locate the venturi tubes. The venturi tubes are located along fuel lines right behind the control valves. These allow air to mix with the fuel before reaching the burners so they have a small open space. If that space is blocked it will restrict the fuel flow to the burner. Make sure it is clear of obstruction. If you have done all this and still have a yellow flame you may need to look at replacing

May 29, 2009 | Brinkmann 810-8410-S Stainless Steel...

1 Answer

No blue flames


Sounds like the burners have worn out. Replace them.

Mar 07, 2008 | Kenmore 16225 Grill

Not finding what you are looking for?
BroilKing Signet 20 Gas Grill Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top BroilKing Grilling Experts

paulcarew

Level 3 Expert

2458 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75222 Answers

Are you a BroilKing Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...