Question about Pioneer Music

Open Question

DJM 600 No music on channel and master when effects is ON, when effects Off works correctly. Level Meter ( Led does not light up at all)

Music on channel and master when effects is ON, when effects Off works correctly. Level Meter ( Led does not light up at all) Anyone can help how to fix this out? Its annoying. Thanks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Pioneer DJM-400 mixer turns on, but channels aren't working

could be a few things , what have you tried to trouble shoot the problem ?
My steps would be ;
check all leads (even if you KNOW u pluged them in)
check the gain is set corectly .
check the line phono slectors are set to what ever you have you leads pluged into on the back of the mixer ( there is 4 red and white RCA plugs , 2 for phono,2 for line CDJs shold be using line )
if you are using digital cables to conect your CDJs , on the back on the mixer there is a small switch marked "CD or digital" make sure that is sleceted "digital " . if ur not using digital cables make sure it is on "CD" .
the info iv put here is based on the DJM-800 so your mixer my not have some of these featers as iv never used a 400 . hope this helps dued . check out www.djtutor.com for more tricks and tips . Pratices'N'enjoy !

Posted on Jan 03, 2009

  • 2 Answers

SOURCE: Hello, I own a hotrod

The fix may be as simple as replacing the volume pot.

Posted on May 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could you use the Bose 901 series VI for a pa system?


Actually that's where the bose 800 systems came from.


Old school jazz guys were using their 900 series turned backwards as a pa

Mar 31, 2017 | Music

1 Answer

It hs no instument lighting,Chanell level indicators and master level indicator


is there power to it? does sound come out of it? if not it could be fried or about to fry. Behringer makes low end products, which tend to break fast. if you dont have any sound or lights chances are its unfixable

May 25, 2011 | Behringer DJx700 5-Channel Pro DJ Mixer...

1 Answer

I have a djm 400 and it has started producing a buzzing sound through the speakers. I can take the same speaker cables from the djm 400 and hook them up to my backup mixer and the buzzing goes away. What...


Does it buzz through cans? (headphones). Try listening on headphones (turn off any amps and speakers) on cue to each channel you use and to the master output. is it stil there? if so it's an all round earthing fault. If it's all good through the cans (sorry...I mean headphones), try it with the amp/s on again. If the buzz is back it souds like the screen on the main audio output connecters has come off inside.
It's a quick fix, but if you have never used a solder iron, take to someone who has.

Jan 07, 2011 | Pioneer DJm 400 Professional DJ Mixer

3 Answers

HOW DO I CONNECT A KAOSS PAD MINI TO MY PIONEER DJM 500 MIXER


Try running it in your FX loop ( out of the mixer into the Kaos, out of the kaos back into the mixxer or out of the mixer into the kaos and out of the kaos into your amp.

Jul 08, 2009 | Korg Mini Kp Kaoss Pad

1 Answer

DJM 400 Keep going into over on the channel and the master volume


To keep your levels down keep the TRIM don which is the gray knob. Also keep the hi, mid, and low knobs at the medium level. The control cables are for using the fader start function.

Jun 02, 2009 | Pioneer DJm 400 Professional DJ Mixer

2 Answers

How to connect my qqualizer to my djm pioneer 400 mixer


Use the stereo master outs from the DJM into the A and B Inputs of the EQ (you'll need 2 phono to Jack or 2 phono to XLR cables) then from the A and B Outputs of the EQ to the power amp/ speakers, etc (you'll need jack or XLR cables depending on what is powereing your speakers)

May 27, 2009 | Pioneer DJm 400 Professional DJ Mixer

1 Answer

Pioneer DJM-400 mixer turns on, but channels aren't working


could be a few things , what have you tried to trouble shoot the problem ?
My steps would be ;
check all leads (even if you KNOW u pluged them in)
check the gain is set corectly .
check the line phono slectors are set to what ever you have you leads pluged into on the back of the mixer ( there is 4 red and white RCA plugs , 2 for phono,2 for line CDJs shold be using line )
if you are using digital cables to conect your CDJs , on the back on the mixer there is a small switch marked "CD or digital" make sure that is sleceted "digital " . if ur not using digital cables make sure it is on "CD" .
the info iv put here is based on the DJM-800 so your mixer my not have some of these featers as iv never used a 400 . hope this helps dued . check out www.djtutor.com for more tricks and tips . Pratices'N'enjoy !

Dec 28, 2008 | Pioneer DJm 400 Professional DJ Mixer

Not finding what you are looking for?
Music Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Music Experts

Vito Vacirca Jr.

Level 2 Expert

140 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Pioneer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...