Question about Frigidaire FAQE7001LW Dryer
I have a Frigidaire Affinity Gas dryer Model # FAQE7001LWO. It was made 02/2012. The cycle will start for about 5-7 mins once started and then it shuts off and all lights on the unit start blinking. There also doesn't seem to be any heat blowing when the unit does come on for the first 5-7 mins. Please Help!
Good Afternoon Amanda,
I understand that your Frigidaire Affinity dryer, model# FAQE7001LW, is not heating as well as only running about 5-7 minutes of the cycle before shutting off. There are a couple things to check.
1)The gas supply valve is not open. Check to make sure that the gas valve is open.
2)The dryer does not have enough air supply to support the burner flame. Check with your local gas company to make sure that your dryer is installed correctly.
3)There is a possibility that your LP gas supply tank is empty or there has been a utility interruption of natural gas. Try refilling or replacing the tank.
If you are still having trouble with your dryer, I suggest giving it a hard reset, by either unplugging it or shutting the power off at your homes circuit breaker for 3-5 minutes. When power is restored, start any cycle. If you are still noticing that there is no heat and it stops 5-7 minutes into the cycle, I suggest contacting your local authorized technician. Hope this is helpful.
Posted on May 15, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is something in the control panel that is sending a trouble signal. Your manual should tell you about this. Have you had this very long? It may be under warranty.
Posted on Mar 04, 2009
check your heating element or the thermal fuses located on the back wall the side of the heating element can and the plastic blower ducting
Posted on Sep 17, 2009
There can be many reasons why your dryer will not turn...
This tip that I wrote will help you to figure out what is happening...
Dryer Repair - The Dryer is not Turning
Dryer Repair ? The dryer will not start
Posted on Jul 27, 2010
Tips for a great answer:
Aug 04, 2016 | Frigidaire Dryers
Nov 23, 2015 | Frigidaire Affinity 5.8 Cu. Ft. Gas Dryer
Jun 28, 2014 | Frigidaire Dryers
May 14, 2014 | Frigidaire FAQE7001LW Dryer
Aug 14, 2013 | Frigidaire Affinity 5.8 Cu. Ft. Gas Dryer
Hello ljdixon226 - From what you have described the unit could possibly have a communication problem with the control panel. However, if the unit is not producing any heat please have a professional diagnose the heating element and the blower assembly as well. Either, or, could be faulty at this time. This is not a typical DIY job so please consult a professional.
Oct 08, 2012 | Frigidaire GLEQ2152ES Electric Dryer
Jun 27, 2009 | Frigidaire Electric Dryer
Mar 04, 2009 | Frigidaire Dryers
Feb 17, 2009 | Frigidaire Electric Dryer
Oct 16, 2017 | Dryers
364 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: