Question about LG 42LE5500 42 in. TV

2 Answers

No signal from HDMI mode when I switch on the TV

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,509 Answers

HDMI is an input to the TV not an output. You select the appropriate input e.g hdmi 1, hdmi 2 on the remote. There can be a return signal the other way but the cable has to support that. Try a different hdmi cable.

Posted on May 14, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 28 Answers

Have you verified that the HDMI cable from your cable or satellite receiver is plugged into HDMI-1? Many sets have several HDMI inputs and they usually are labeled. You might also try the input control of your TV to see if the signal is coming in thru another input. Lastly, have you tried another tv set with the same cable?

Posted on May 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no TV reception, What does LG No signal mean?


NO signal is either you have not connected the rear antenna cable (RF Mode) this will receive air signal. You should switch to AV or HDMI mode and connect the receiver.

Feb 16, 2015 | LG Televison & Video

5 Answers

Dear Sir/Madam : Re: ONKYO HT-SR800 7.1 ch HOME THEATER SYSTEM The system will not deliver video output in television mode . Audio is fine . Initially , I press the...


Check the input selector on the TV, if you have audio only then it is a cable problem,
that means that cables are not connected in the right way.

Oct 10, 2008 | Onkyo Televison & Video

1 Answer

Hooked up my HP pavilion dv7-1240us (Vista) to our HDMI cable, then into the TV, as usual. Slept he computer, then disconnected the HDMI cable. Since then, I cannot get any screen at all. Have tried...


restart pc in safe mode, change video back to standard VGA of HD VGA video. PC has to be in HDMI mode and your TV has to be PC mode. Use a DIV to HDMI connector or better yet HDMI to VideoPort if your TV supports it, HDMI almost never gives you the screen output you really want anyway.

Jan 17, 2014 | HP Pavilion dv7-1240us Notebook

1 Answer

HDMI input says "mode not compatible"


If your Playstation is putting out the signal in 1080p then try changing it to 1080i and see if that works. Not all TVs are compatible with 1080p.

Aug 02, 2012 | Samsung Lnt4042hx/xaa

1 Answer

"No signal" sign on TV screen using HDMI selector


it sounds like a refresh issue, double check you selector and make sure it fits the refresh of the tv. i had this once with a sharp where the tv was 120hz and the selector was 60 and it created a no signal and when it did come in it was jumpy. if you have a 120 tv then selector should be the same.

Apr 27, 2010 | LG 42LH30 42 in. LCD TV

1 Answer

Plasma tv showing "Mode not supported" message


YOU HDMI SWITCHER IS DEFECT OR YOUR TV IS NOT COMPATIBLE

Apr 24, 2010 | Samsung PN58B860 58 in. HDTV Plasma TV

1 Answer

My system is stating that there is no signal but the PS3 is plug into an HDMI cable and the signal is fine. I switched the HDMI cables from the TV to the PS3 and the signal is good. How do I correct this?


try video reset

when ps3 is in standby mode(red light)
press and hold the power button till you hear a second beep.

standby mode press hold power........"beep"......"beep"..release power button

Oct 25, 2009 | Sony Playstation 3 (PS3) Console

2 Answers

No signal from ps3 to lg tv via hdmi


if this is the first time you've hooked it up via HDMI then you have to go back to the old cables first. Hook those up to the old TV or the new one, then go to settings and switch to HDMI. It will give you 30 seconds to change the plugs again so you can view the HDMI. Then select ok. Hope this helps

Aug 20, 2009 | LG 42LC2D 42 in. LCD HDTV

1 Answer

VIZIO VO42LF says no signal when connect to PC after power on/off


Could be a sensitivity problem, have you tried to switch tv modes back and forth, sometimes if you do that it will save you from restarting the computer. I had a tv about 10 years ago that had a sensitivity issue, went to see about fixing it, unfortunately, the tv brand was no longer in the country and user service parts were not available.

Apr 11, 2017 | V, Inc. Vizio P4 Plasma Television

Not finding what you are looking for?
LG 42LE5500 42 in. TV Logo

840 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74666 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...