Question about Cell Phones

1 Answer

Noisehush n500 bluetooth

Droid Razr M/4.1.2 + NoiseHush N500 My Bluetooth will not properly power on. This device is already paired to my phone, and has previously worked. Nothing has changed on the phone since the last time I used it. Now, it will not power on. However, when I plug it into my computer using its original usb power cord, the RED light comes on for about 3 seconds, then switches to solid BLUE indefinitely. The unit will not respond to pressing or holding any buttons, in either a plugged or unplugged state. My phone shows no sign of error, and believes it is connected to this device, with the Bluetooth service switched to ON. I have never connected any other Bluetooth devices to this phone, therefore it is not otherwise paired. Please help! Is there a secret RESET button somewhere? Is it just busted, or is it salvagable? Thanks!

Posted by on

  • a_paige_krug May 14, 2014

    I don't know how to check the battery life on the bluetooth. Perhaps I should take it back to the Verizon store...

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 105 Answers

You can check the battery life of the bluetooth,if ok then you need to back up your files and have a reset your phone into factory default and paired it again....

Posted on May 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My bluetooth light shines blue on my cellphone,the phone says bluetooth is connected,but the headset does not appear to function,,,,it worked an hour ago just fine ,,,,i could not find any instructions for...


the bluetooth device battery is it charged and is it ok,if you live your phone very there is a distance limit then it goes on standby for a limited period then it automatically switchies off

Jan 20, 2014 | Naztech Noisehush N700 OverHead Bluetooth...

1 Answer

Bluetooth in car not recognizing Droid 2 any more - worked fine but now does not


your limit would have crossed
there are a particular no of devices that could be paired
Pair your Verizon Motorola Droid 2 smartphone with a Bluetooth device using these steps:
1. From the Home screen tap Menu > Settings app.
2. Tap Wireless & networks.
3. Tap Bluetooth settings.
4. Ensure that Bluetooth is checked.
5. Turn the Bluetooth device on and set it to discoverable if required.
6. Tap Scan for devices.
7. The Droid 2 should locate any devices in the area. You may need to enter a password. Most devices have a password of 0000 (four zeros).
The Bluetooth indicator should now show in the notification area. This indicates you are paired successfully.

Feb 24, 2012 | Motorola Mobility Droid (2 GB) Cell Phone

1 Answer

Hi, i need to know how i can pair my bluetooth plantonics explorer 232 to my incrediable droid 2? when i scan to look for the bluetooth device my phone couldnt find/pair it...please help!


The Bluetooth device that your Droid 2 is scanning for must be in "Discoverable" mode:
1. (If not already off) Turn it off by pressing and holding the call control button. Hold it until the indicator glows red and emits a sound.
2. Now press and hold the call control button for five seconds until the light begins blinking red and blue, then release the call button.
3. You may now rescan for your Explorer 232 on your Droid 2 and Select it when it shows.
4. Enter "0000" as the passkey if you are prompted for one.

Sep 25, 2011 | Plantronics Explorer 232 Bluetooth Headset

1 Answer

What is the pairing number?


My instruction manual said if it asked for a pairing number to enter, "0000" That is 4 zeros. Hope it helps.

Jul 06, 2011 | Naztech Noisehush N700 OverHead Bluetooth...

1 Answer

I have a Noisehush N500 bluetooth and I need help in making it work on my Android I1.


Follow the steps to make it work on Android:
1. Switch off your N500 bluetooth headset 2. Press and hold the power button on N500 bluetooth headset for 6 seconds. (Remember, down press and leave the power button as it will switch on. We have to put it in discovery mode so pres and hold for 6 sec.)
3. The led will flash from blue to red.
Now on your android phone, Go to settings, "Wireless & Network", Bluetooth Switch on the bluetooth and scan for devices You will see Noisehush N500. Click on the name and select pair
5. Enter "0000"as the passkey when phone when phone prompts. 6 Select the name again in phone and select connect.
The headset will be connected. If it asks to authorize, select always authorize.

May 31, 2011 | Cell Phones

1 Answer

I lost my manual and don't know how to pair the headset to a new phone


Turn unit on - hold function button for 10 seconds
Led should flash red -blue-red-blue ...
on your moble device go into the search function
passcode 0000 (4 zeros)
if successful only the blue led should be on

Apr 07, 2011 | Naztech Noisehush N700 OverHead Bluetooth...

1 Answer

Pairing a Jabra 250 headset with my new motorazr2


Here is what you need to have configured on your phone for Bluetooth connections:

1. Create a link between your Motorola RAZR Phone and any Bluetooth Accessory 1.0 and up, you need to turn the Bluetooth connection "on". This is how: Go into your phone "settings". > Then select "Connection" > "Bluetooth Link" > "Set Up" > "Power" > "On". The connection will stay on until you turn it off. We recommend to turn it off when not in use to preserve battery life.

2. To connect your RAZR to another Bluetooth hands free kit or headset, go into "Settings" > "Connection" > "Bluetooth Link" > "Handsfree" > (Look for Device). You phone will scan for available devices located within the range of the RAZR, approx 30 feet away. If your cell phone is already connected to a Blue Tooth headset, you must disconnect from it to find other devices. Once you have identified your bluetooth device, highlight its name and click on the "select" button.
3. The Bluetooth device will ask permission to connect. Select "yes" and press the "select" button; after that you will be prompted to insert a PIN code to initiate a secure connection. The PIN code is usually provided by the Bluetooth device manufacturer (in the manual), not the RAZR (unless you are connecting to another phone). Once the connection is made, you should see the bluetooth logo displayed on the internal screen, while the external screen Bluetooth indicator will flash.

Dec 14, 2007 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...