How do i load and thread the bobbin in the singer 6250 seduction sewing machine?

hi Patty.
if you go to this link there is videos showing how to do this.
Singer cg 500 sewing machine How to thread bobbin upper thread Google...

Learn more about your machine here:

Singer Sewing Machine Company Serial Numbers

There are tons of diagrams, web sites and videos about older Singer sewing machines. A lot of them are very similar, so finding information for one will most likely be beneficial.

How to thread vintage round bobbin sewing machine Singer 99K

How to Wind Bobbin Thread Case Vintage Antique Singer Treadle Sewing...

How do you thread an old Singer sewing machine

threading antique Singer sewing machine Google Search

...

Not sure what you mean by "vertical" bobbin. Everything I've found indicates it is a top loading bobbin that sets horizontally in the machine.

These sites may be helpful:

Threading the ITP Singer 534 Stylist

Singer 534 Stylist Sewing Machine Threading Diagram

How to Insert the Bobbin in Singer 534 eHow

Singer 534 stylist bobbin threading Google Search

just work here singer stylist 534


///

Go to you tube singer may have some videos for this machine or it is probably similar to most other machines or you can just call they are pretty nice folks at singer customer service

I can't see this manual available at the usual spots of:
www.sewingpartsonline.com
www.sewusa.com or
www.diplodocs.com
but you could email either of the first two websites and ask them.

If you look at the threading up diagram here,
http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Elna_Sewing_machine_threading/Elna_225_threading_diagram.htm
it may be sufficient info to get your machine running.

I'm presuming it is a front loading bobbin and case model? Many models are this style Singer, Jones/Brother, Toyota, Bernina, once you've mastered the bobbin case and bobbin, they are all very similar.
If it is a top loading bobbin style then look at the threading up diagrams for the Janomes, it may be more like them. These there is no removable case, you load the bobbin into the bobbin holder and click the thread into the tension spring.

The critical thing for threading up all sewing machines, is winding the bobbin nice and smoothly, getting it into the bobbin holder or case the right way and placing the thread tail into the tension spring correctly so the thread is under tension as it feeds out.
And for the top thread, it must go through the take up lever, tension dial (usually two metal discs that press together with a spring) and then down through the needle eye.
Always, thread up the top thread with the pressure foot up - this opens up the tension device.

Hope this helps out a little at least.

try sewusa loads of manuals and sewing diagrams. Since its a older machine.I would clean and oil it also.Lint can cause all kinds of issues.

i was able to find it at www.ifixmachines.com

http://www.singerco.com/resources/threading.html Check out the threading diagrams on Singer's website.

Try this page for Threading and Bobbin Winding Diagrams for loads of machines.....even if your model is not specified, there's a good chance you will be able to work it out from similar machines.

i think you have not looped the thread around the tension on the top before putting it onto the bobbin. you need to wrap the thread in a circle around the sphere near the regualr threading lines.