My urban beats sound bar does not work with ipad

The actual cross bars will most likely fit but the 'feet' that mount it to the car won't. You will need the feet specific to your vehicle.

I use a Surface Pro 4 tablet computer and wouldn't use anything else on the market. I have used the Surface 2, then the Surface 3, and now to suit my needs in the computing world a Surface Pro 4. There is nothing on the market that can compare, but the price is up there which is it's only deterrent. But if you want reliability, speed, to pretty well all tasks, it's the standout in the world of tablets bar none. No passwords on my baby, just good old facial recognition, which doesn't miss a beat every time. So my advice, trade that iPad in, and look at a Surface 6, you won't be disappointed. Ken.

You can try a few things on the iPad.

you can't start by just resetting the networks settings on the iPad and power cycling the sound bar.

if the issue persist then plug your iPad into a computer with iTunes, back up and restore the device. Set the Device up as new. If the device can now connect to the sound bar you can try to restore from the iTunes back up you created. If the issue comes back when you put the info back in the device then you will need to set up as new.

if the is still not resolved and you know the iPad can connect to other Bluetooth devices then you will need to reach out to Denon.

Try to reset the phone. If it doesn't work, check all the sound settings and the sound button on side. If all of those don't work, try factory restore. If it still doesn't work, make reservation for Apple Store Guinness bar.

Hi Gary

This can happen infrequently due to either the iPad needing a restart (iPhone 5's and 5s's) have similar issues.

There are two things to try;

1) Turn your samsung sound bar off, and pull out the power cord out of the wall, now this may sound unnecessary but the logic behind that is to have it clear any potential "error code" or crashed script which is powering the bluetooth transmitter in the sound bar. You do this for ca. 60 seconds, 30 will do too but we just want to be sure. Once that is done plug the bar in again and power it on and see if it works now.

2) Restart your iPad, this has the same logic behind as step one, but in this situation i'd like you to turn both off starting with your iPad.

It is not uncommon especially depending on the iOS your running on your iPad for the bluetooth transmitter not to see the bluetooth sources around you.

To turn your ipad off push the sleep/power button at the top right of your ipad for 10-15 seconds. Until you see the swipe to turn off. Let it shut down completely after you swiped it to turn off. (this can take a minute) Once you see the spinning wheel on your ipad disappear start with unplugging your Samsung Sound Bar. As in step one follow the same procedure until its back on. Now turn your iPad back on with the sleep / power button and wait till its fully loaded.

Now in the settings>bluetooth you should in theory see your sound bar again. If you still encounter problems don't hesitate to let me know.
Have a great weekend

Philipp

One of two things is going on. Plug your Dre beats into something else and check it out. If only one side is working, then your dre wiring is at fault. If it works fine on other equipment and consistently fails on your Ipad, then your ipad input jack is likely at fault. This is not uncommon and shops charge about $100 to replace the part on the ipad. There are some diy kits and videos for the adventurous and care need be exercised to avoid destroying your ipad.

Try removing Dre Beats from Bluetooth settings (forget device) then reset your iPad. I just had the same problem and after that method they now work.

I AM LOOKING FOR AN URBAN DETOUR BUMPER BAR!!! CAN ANYONE HELP ME? PLEASE

On this site
http://www.twoleftfeet.co.uk/Mutsy_Urban_Rider.html#
it says that you need to pull thae safety bar up whilst pushing the push bar down to fold it. Then to open it again I presume you pull the push bar up and wait for the saftey bar to click into place. I have read that you may need to push the pushbar down quite hard whilst pulling the safety bar up.

I hope this helps

I've lost the protection bar of Urban Detour Xtreme - actually, I bought it without the bar and the seller cannot find it anywhere :( do you know how I can get one? I am not in England, I'm from Bucharest. Thank you.