Question about D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access Point

3 Answers

We are a motel we have d link dwl320 ap. It us suddenly getting no power. What can we replace it with?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

There is always a button for Reset on the back of the router. Try to reset.

Make sure that the adapter is not at fault. Use a different one. If that would not work, you need to repair router.

Thanks.

Posted on Jun 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,383 Answers

Change adapter .if it still not working .
Then press reset button for 15 seconds then try.
Reset button is in back side of your router.
Also change power outlet then if it not works then there is some hardware circuit issue with router.

Posted on Jun 23, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

If the router does not power up, it is probably dead. IMHO the best Wireless Router you can get is the Buffalo WHR-HP-G54. It is a wireless G (not N) but that should be more than adecuate for your needs.
You can get it here: http://www.newegg.com/Product/Product.aspx?Item=N82E16833162134&Tpk=whr-hp-g54

Posted on Jun 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to collect luggage from a motel


have a friend come get the key and personally go get your belongings

May 27, 2016 | Dehumidifiers

2 Answers

Can I pay for a motel with my paypal


if the motel says it takes paypal you should be able to,, but ask them motel first id they take paypal

Mar 27, 2015 | PayPal Computers & Internet

1 Answer

Tp-link tlwa5210g wireless single not flashing


check SSID , if shown ,, the problem with electricity ,, if not shown ,, check antina , if not shown ,, reset AP ,, configure agian ,, if not shown ,, replace AP

Dec 20, 2013 | TP-LINK TPLink TLWA5210G 24GHz High Power...

1 Answer

Can't detect poe npe-4818


those boosters can hiccup on the sometimes

recycle power to booster and press engage(or activate button)

that should do it

might need to 'find' that connection again after it's live

May 30, 2012 | EnGenius Technologies Inc Npe-4818 Power...

1 Answer

Cannot access my tp link TL-WA601G 108M Wireless Access Point


Use the Factory Default Reset button: First, turn off the AP's power. Second, press and hold the default Reset button then turn on the AP's power, until the system LED lights up (about 3 seconds). Last, release the reset button and wait for the AP to reboot.


Reset the factory defaults.


Here is your user manual:
http://www.tp-link.com/english/soft/20091515618.pdf


Default username and password is admin for both

May 20, 2012 | TP-LINK Computers & Internet

2 Answers

Hi, I got a AP-5131 with 4 antenna outputs in the


Greetings, It is entirely possible that it has a RAM error but again this may be part of the power spike problem. Its not unusual for RAM to be affected. I don't suppose it is connected into a power spike connector? It would be wise to invest in a good one with throwouts on all plugs and use it specifically for all your PC set up. I had two router/modems affected last year ( in summer) whenj lightning is not around one would think! But there is more lightning in summer than winter according to the Gurus's of weather.

I now have all sensitive items plugged into an expensive power board with double protection fuse/cutouts and so far all has been well.

If the unit is under any warranty I would be taking it back and just complaining that is stopped working suddenly, without explanation or intervention on your part. Let them replace it. Dont ask about spike arrestors in the same shop HAHA as they may suddenly refuse to exchange it.

Ram chips are not cheap anyway, and both chips could be damaged as well as internal componenents. I don't suppose you can smell any burn in the unit? (not always evident)

Cheers


Oct 12, 2009 | Symbol AP-5131

1 Answer

AP does not work in Repeating Mode?


check your wi fi is enabled on ap settigns also che k broad cast ssid is enabled on it.

Apr 27, 2009 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

Got wireless signal but no internet connection


You can try to power cycle your entire network (refresh).
This often happens when you have a large network.
  1. power down ALL Computers and disconnect the desktop from the D-Link Switch.
  2. turn off all SLAVE AP's first.
  3. Turn off the Master AP and disconnect one end of the Ethernet.
  4. Turn off the D-Link Switch and disconnect one end of the Ethernet.
  5. Now, turn off your modem.
Leave them for about 10 to 15 minutes, depending on your urgency.
Turn on and connect all devices in the EXACT order.
  1. Turn on the modem. wait 2 minutes.
  2. Turn on the D-Link Switch and wait 1 minute. Then connect the Ethernet to the MODEM.
  3. Turn on the Master AP and wait 1 minute. Then connect the Ethernet to the D-Link Switch.
  4. Turn ONE of the Slave AP's. Turn on your Laptop. try to connect to the Internet. If successful, Disconnect from the network on the computer and proceed to turn on the rest of the Slave AP's, Laptops, and Desktop. If its NOT successful, power on the Desktop and try to connect to the internet.
  • If the desktop connects to the Internet, Check your D-Link's homepage "192.168.1.1" (default) for any wrong settings. If it does not connect, check your DSL Modem's settings.
If the above does not work, post what you did the day before this happened. Probably something small might have messed with the network.

Aug 15, 2008 | D-Link AirPlus DI-524 Wireless Router

2 Answers

Ap 700 reboot suddenly


Device setting themselves on their own to default?  Sometimes power surges, thunderstorms causes all of these. Reconfigure devices and try to buy surge protector.

Oct 18, 2007 | Proxim Orinoco Ap-700 802.11a, 802.11g/b...

Not finding what you are looking for?
D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access Point Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...