Question about MSI Microstar KT6 Delta (MS-6590) Motherboard

2 Answers

Usb when i put anything in the usb it dosent recognise it att all. ive looked thru the BIOS and i cant find anything that fixes it or is it the BIOS? please help

Posted by on

  • christian jensen jr Nov 05, 2007

    no i have tried that but it simply wont detect usb divices.

  • christian jensen jr Nov 05, 2007

    could this problem be based on hardwhere problem or old bios maby?



2 Answers

Hit delete when booting and go into bios setup and enable the USB ports and also the plug and play settings.

Posted on Nov 22, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 143 Answers

Set the bios to default settings and try agin k

Posted on Nov 04, 2007

  • marco amezcua
    marco amezcua Nov 06, 2007

    ok so i downloaded the specs on this mother board and i see that it has 8 usb ports now the only thing that i can see is that you might have plugged in the wires to the board backwards if so try to turn them around if it is not too late



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bios update failed.. Now all i get is 8 beeps and no display? Any solutions?

Hello,the only way to fix this problem is to prepare original bios file at your USB stick.But first you need to made this USB bootabile(put some universal BIOS fasher software from internet),than put the original file (bios)inside.when its finished try to find another PC (correct),pick up your BIOS chip,(the case of BIOS must be the same as another correct PC!!!!!!!!! IT IS VERY IMPORTANT),than turn on correct PC,run bios ,set USB stick as 1st bootabile device,save changes and restart PC,after that you will see universal Bios mask,you have choice to run bios file you already put on USB stick,DO NOT START FLASHING BIOS!!!!! PICK UP THIS BIOS CHIP FROM HIS CASE,THAN PUT YOUR BIOS CHIP (CHANGE CHIPS UNTIL THIS PC IS STILL WORKING)press enter and this PC will flash your BIOS with correct file.When its finished TURN OFF THIS PC(dont restart).Pick up your bios chip,and put it on your moterboard place for Bios,also put the bios chip from regular (correct)PC to its place,and you are finished.start PC you are using to fix problem ,just to check everything's OK,THAN TURN ON YOUR PC,IT MUST BE WORKING,9its look like risky job but dont worry its ok
I already fix lot of this problems,only check-dont short pins of chip,or turn chip at wrong direction,best luck :)

Dec 16, 2013 | HP Pavilion 1214 QW701AAR Refurbished...

2 Answers

I deactivated my usb ports coz my sister puts a lot a of virus thru her USB. Thru bios i deactivated itnow i cant use my keyboard anymore. how can i active it again?

You have to go back to your bios setting and re-activate the usb ports, try getting usb lock software to lock the usb ports rather than disabling them.

u can get one following this link

Jan 10, 2011 | Computers & Internet

2 Answers

Is there any way to put ringtones on a samsung juke through usb connection

Plug in your Juke to your PC via the USB cable. You may need to purchase a USB cable that is compatible with the Juke. This is available on Verizon's website.plz vote me if i had helped.

Jul 16, 2009 | Cell Phones

1 Answer

Pc dosent recognize

you may need to download the usb drivers for your pc to recognise the phone try thr nokia website.

Jun 01, 2009 | Nokia N72 Cellular Phone

1 Answer

My Lyra Dosent Turn On

sir u need to recover ur dead digital player and how its work follow me!!
1/ try to download a flash tool from the main site of ur product
2/visit this and keep uuuuuuuuup

Aug 14, 2008 | RCA Lyra RD1072 MP3 Player

2 Answers


Download the firmware updater from the mobiblu site
Install the software, connect the player via the USB cable, set the switch to hold and run the updater. When it is finished, stop the device and disconnect it. When you power up, it will be back to factory settings (any data/music will be erased).

Aug 12, 2008 | Hyun Won mobiBLU DAH-1900 MP3 Player

1 Answer

Anything connected to any usb port is not recognised by the computer

This could be drivers out of date or bios out of date
go to
look for drivers in the menu
then click to check and update your drivers

but it may be wiser to update your bios in the same way first
then reboot
then go back to majorgeeks for your driver upodates and reboot

then try your usbs one at a time as some times putting in wrong slot makes for


Jul 07, 2008 | Computers & Internet

Not finding what you are looking for?
MSI Microstar KT6 Delta (MS-6590) Motherboard Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Computers & Internet Experts


Level 2 Expert

73 Answers

Alun Cox

Level 3 Expert

2678 Answers


Level 3 Expert

781 Answers

Are you a MSI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides