Question about Lands Phones

5 Answers

Just got the phone with no user manual and need to put it back to factory settings need to unlock code and the camera module is not ready to work

Posted by on

  • 4 more comments 
  • rbrtbonanno Jun 23, 2009

    its an apple cect-f188 hope this helps you

  • rbrtbonanno Jun 23, 2009

    it is a apple cect-f188, the phone is the same as a cect-m188 if that help but would like to get the user manual for it

  • rbrtbonanno Jun 23, 2009

    this does not work for me it didn't have the manual for the apple cect-m188 that i need do you know else i can look thanks for the help

  • rbrtbonanno Jun 24, 2009

    i tryed that and they didn't have anything for my phone mine is a apple cect-m188. do you jhave anything else thanks

  • rbrtbonanno Jun 24, 2009

    hi, i looked at what you sent and that is no help i need the user manual for a apple cect-m188 cell phone i didn't get one with the phone it was a gift

  • rbrtbonanno Jun 25, 2009

    hi sent them a message so i have to wait and see but thats for the help

×

Ad

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lands Phones Master
  • 76,846 Answers

HERE IS THE LINK TO THE DOWNLOAD SITE FOR A USER MANUAL DOWNLOAD IN A PDF FILE FORMAT.
http://www.phonedog.com/cell-phone-research/apple-iphone_user-manual.aspx

Posted on Jun 25, 2009

Ad

This site sells the manuals for a small fee. I have used them in the past for a similar phone and they were able to send it by e-mail and kept their promise. I highly recommend them for this device.

Best regards

nLinked

Posted on Jun 25, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,952 Answers

What ur phone model and no?under warranty period now then ur problem free of cost in ur mobile service center

Posted on Jun 24, 2009

  • mohammed marika thambi
    mohammed marika thambi Jun 24, 2009

    dvice.com/archives/cell_phones_pdas/ -


    www.knowyourmobile.com/.../iphone_nanoalike_the_cect_m188_available_now.html


    www.youtube.com/watch?v=OMukWm5kwqU










×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 987 Answers

Http://www.cect-forums.com/
register here ..here the manual is availble...

Posted on Jun 24, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,383 Answers

Please give me your model information.

Posted on Jun 23, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Resetting unlock pad on 2005 crown Victoria


The factory code can not be changed (unless the module is changed),-only the secondary code that the user puts in is changeable. Look for the code in the user manual, trunk, or embossed on the module itself, or you are going to have to go to the dealer. They are the only ones with the equipment to read the code from the computer.
Yes, they will charge for this service.

Feb 02, 2016 | 2005 Ford Crown Victoria

2 Answers

Camera Module Not Ready, Help me pleace


You try this:
  1. Dial *### Go to Factory Settings
  2. Click on select type sensor at last
  3. Choose gekewei and press ok. confirm it ( press ok twice )
  4. Now you are ready to use camera
If the above steps doesn't work, the problem can be repired by flashing with original flash file read from another phone(same model..)
Here are some links for more information about flashing: http://forum.gsmhosting.com/vbb/archive/t-469196.html


Jun 28, 2011 | Nokia N95 Cellular Phone

1 Answer

Try to access ka08 camera but it shows camera module not ready


from china-mobile-phone.com :

6. Camera module not ready

Please restore factory setting and try again. Code for restore factory setting is 1122. If problem still exists, please set the camera to save photos to memory card and try again.

Oct 03, 2009 | Dual Electronics CECT P168 Cellular Phone

1 Answer

My cp is nokia 5310 ..the camera is not working.....pls.help me..


This is a common problem with some Nokia phone (China made). You may need to restore it to factory settings.

NOTE: Save all the files from the phone memory to the memory card (i.e. Contacts, music or videos)

TO RESTORE TO FACTORY DEFAULT:

1. Removed the memory card.
2. Turn on the phone
3. Enter the code *#987*99#

Your phone will be restored to factory default.

Have a great day!

May 29, 2009 | Nokia 5310 Cellular Phone

1 Answer

N99i camera problems


There is a downloadable user manual at http://chinamanuals.com
Ask them, they know everything about these n99 phones.

Jan 31, 2009 | Dual Electronics N99i Cellular Phone

2 Answers

Camera/camcoder module not ready for nokia 5310 express music


hi,
try reset you phone using this code *#7780# reset to factory settings.
if not this a software problem try to update the firmware using pc suite.

Jan 20, 2009 | Nokia 5310 Cellular Phone

1 Answer

Factory ringtones


Sir,

You can lock your phone manually or set the phone to
lock automatically whenever you turn it off.
To use a locked phone, you must enter the unlock
code. A locked phone still rings or vibrates for incoming
calls or messages, but you must unlock it to answer.
You can make emergency calls on your phone even when
it is locked (see page 68).
Locking Your Phone Manually

Find the Feature > Settings > Security
> Phone Lock > Lock Now


Unlocking Your Phone
Tip: Your phone’s unlock code is originally set to 1234.
Your service provider may reset the unlock code to the last
4 digits of your phone number.


Setting Your Phone to Lock Automatically
You can set your phone to lock every time you turn it
off:

Find the Feature M> Settings > Security
> Phone Lock
> Automatic Lock > On

If You Forget a Code, PIN, or
Password
Note: Your phone’s 4-digit unlock code is originally set to
1234, and the 6-digit security code is originally set to
000000. Your service provider may reset the unlock code
to the last 4 digits of your phone number before you
receive your phone.
Press To
1 keypad keys enter your unlock code
2 OK (+) unlock your phone
Find the Feature > Settings > Security
> Phone Lock


Master
Clear
Clear all user settings and entries
except SIM card information, erase all
downloaded pictures and sound files,
reset all options except unlock code,
security code, and lifetime timer:
M > Settings > Initial Setup
> Master Clear
Caution: Master clear erases all
user-entered information (including
phonebook and datebook entries) and
user-downloaded content (including
photos and sounds) stored in your
phone’s memory. After you erase the
information, you cannot recover it.


Thanks
Good Luck

Don't forget to rate the solution

Jul 05, 2008 | Motorola Mobility Mobile PhoneTools 3.0...

3 Answers

Camera Problem


remove the camera and put it back it will be done 1000000% ok

May 29, 2008 | Nokia N95 Cellular Phone

12 Answers

Problem in CECT U90 MOBILE


CAMERA MODULE IS NOT READY

Feb 16, 2008 | Cell Phones

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...