Question about Neff W4380X1 Front Load Washer

Open Question

W4380 - very loud and noisy when spinning, otherwise, wash comes out okay. Please advice. Thanks

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Neff W4380 error or warning '03'

Hello there,

when the machine makes drowning sounds and beeps error dry (while trying to drin out) blow strongly into the drain pipe. It should result in a higher flow of water out the drain pipe and error 3 should go away.

Posted on Oct 11, 2008

  • 228 Answers

SOURCE: neff washing machine not spinning

sounds like motor brushes have worn out will need to remove motor to replace they are inexpensive.the clicking is the relay telling motor to rotate clockwise or anticlockwise.

Posted on Oct 28, 2009

  • 16 Answers

SOURCE: I have a Neff W4380 integrated washing machine

check the drive belt sir, it is.

Posted on Mar 19, 2010

Testimonial: "I shall try all this out tonight...have ordered some carbon brushes. Hope it works. Thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch Maxx 5 very loud noisy spin


the spinner to motor coupling is damaged by the wear and tear..please replace it

Aug 24, 2012 | Bosch Washing Machines

1 Answer

Indesit WIDL1265 - Noisy on Spin


Hello, this is a symptom of drum bearing wear, and what you need do is to check the wear to see if the inner drum moves up and down relative to the fixed outer drum. It should only moves a minutes amount. If it moves more than a millimeter or two, that means it is probably worn bearings and you will need to replace it.
Thanks

Jun 10, 2010 | Washing Machines

1 Answer

Hi there my machine has gone very loud when spinning,washes perfect,any advice


Sounds like the main drum bearings have failed.
Spin the drum by hand from the front of the washer, if it feels rough, or is noisy or rumbling, then the the main bearings have failed.
A major repair!!!.

Jan 15, 2010 | Zanussi Washing Machines

1 Answer

My MW511 model is not spinning , slow motion wash cycles, noisy


Hi blow down the hose that the waste water comes out of, it may be blocked

Nov 29, 2009 | Fisher and Paykel (IWL12)

1 Answer

Washer runs very loud while spinning and stops very loud. Squeaks and squeals!


Sounds like the main drum bearings have failed. remove drive belt, and spin drum by hand, if it feels rough or is noisy, then the bearings have failed.
Please rate my solution.
Thanks.

Nov 05, 2009 | Washing Machines

1 Answer

Hotpoint WF220P has become very noisy during spin, especially at high revs. Can it be worn brushes or motor, or bearings? Otherwise all is OK.


Remove drive belt, and spin drum by hand, if it feels rough or noisy, then the main drum bearings are worn.
If no noise from drum, could be a motor prob.
Please rate ,my solution.
Thanks.

Nov 02, 2009 | Hotpoint Aquarius WF220 Front Load Washer

1 Answer

WMT01 washing machine makes a very loud noise on the spin cycle, is this a bearing?


Remove belt, and spin drum by hand, if it is noisy,or feels rough, then it is the main drum bearings that have failed.
Please rate my solution.
Thanks.

Aug 16, 2009 | Hotpoint Washing Machines

1 Answer

In spin cycle, there is a loud metal on metal sound. could it be a bearing going out? the machine still spins but much slower, and the banging sound occurs in one place every revolution during the spin...


Hi
Remove the drum belt, and spin drum by hand.
If it feels rough, or it is noisy, then drum bearigs have failed.
Please rate my solution.
thanks.

Jul 24, 2009 | Whirlpool Washing Machines

1 Answer

Neff washing machine not spinning


sounds like motor brushes have worn out will need to remove motor to replace they are inexpensive.the clicking is the relay telling motor to rotate clockwise or anticlockwise.

May 30, 2009 | Neff W4380X1 Front Load Washer

Not finding what you are looking for?
Neff W4380X1 Front Load Washer Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Neff Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you a Neff Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...