Question about Televison & Video

1 Answer

How to replace timer

I have a Washing Machine Kenmore 800 model #11029832801 and I need to replace the timer, how can I do that?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 549 Answers

I have a link to Sears parts direct. According to the diagram, there are screws in the back of the top panel. Remove the screws (1) and you can take the back cover off (4). Then remove the wires from the timer (13)that are plugged into it, and the agitation delay board (19). Then remove the knob and nut holding the timer in place. Pull out the timer and then do the reverse procedure. Here is the link to the diagram. http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Washer-Parts/Model-11029832801/0582/0153200/K0905012/00002?blt=06&prst=0&shdMod=11029832801

Posted on May 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmoore 800 washer doesn't do anything


Possible that the timer controller is faulty as it fails to switch or move in the cycle of the program
Use WD 40 to clean the switch, the knob can be replaced if this turns loose.

Jan 25, 2013 | Kenmore 2982 800 3.5 cu. ft. Top Load...

3 Answers

Trying to replace timer on Kenmore 700 washing machine (model 110.28727200). The existing timer is an Invensys model W10129602. Where can I find replacement or substitute parts?


Here is the timer to order. To remove the knob on the old timer, from the back of the timer there is the knob pin that you push in and it will release the the knob.

The part comes with a 365 day, any part, any reason return policy.

Nov 10, 2012 | Kenmore Washing Machines

1 Answer

I have a kenmore model M22922 washing machine that has stopped working when it gets to the spin cysle. I replaced the timer switch, but that did not help


You replaced the wrong part.
The lid switch must be replaced.
If we had a complete model number from the machine we could be more specific.

Aug 28, 2010 | Kenmore Washing Machines

1 Answer

My Kenmore washing machine model 20602991 - the water won't stop running when filling the tub. If we catch it we can move it to the next cycle to wash, then we need to move the dial to the next cycle to...


Hi,
The timer of the washing machine is defective kindly replace the timer with proper channel please specify the model number and make of the washing machine to get the same timer

Dec 24, 2009 | Washing Machines

1 Answer

I need to replace the timer on a series 800 washer


Fix the timer on the washer so that it fills with the correct amount of water, and so there is the correct amount of time for each cycle. Make sure the washer is unplugged and take off the control knobs and the panel that lays over the knobs. The knobs could be either at the front or back of the machine. Check the wires that link the timer to other areas of the washer. If they are slack, push them further into place with pliers.


Change the timer by disconnecting the old one. Make sure the new timer is made for the brand of washer that you own. Unhook the wires to the old timer one at a time and connect each wire to the new timer.

Mar 02, 2009 | Kenmore 23822 Top Load Washer

2 Answers

Washer wont progress through the cycles, suspect timer.


I was able to fix the problem by replacing the timer ($106 CDN). Thanks for everything.

Jan 06, 2009 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...