Question about Kodak HERO 7.1 PRINTER

Open Question

Black ink is not printing dark enough with new cartridge

How can i make the text darker?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 96 Answers

SOURCE: printer does not make black

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Posted on Aug 26, 2008

Ad
  • 214 Answers

SOURCE: Kodax Eps-5 Printer want print with one cartridge

No you need functioning colour cart for black to work.

Posted on Apr 28, 2009

deepfunktion
  • 18 Answers

SOURCE: My printer won't print black ink even though the cartridge is full

try to clean the nossles with software from the manafactures website

Posted on May 06, 2009

SOURCE: My KodakEasy Share 5300 will not print in black.

92b8b47.jpgThe Kodak AiO printers 5000 series and ESP series PRINTHEADs has orange protective cap that need to be remove to fit on the printer carriage. For the ink cartridges 7b91cbc.jpgthere is also a orange protective cap.
Issue that its not printing black and deep clean and removing the printhead and reinstalling the printhead (reseating printhead) is already done and still no black when printing. The printhead should be replace. For futher assistance call 1 800 421 6699 Kodak AiO printer support line

Posted on Nov 19, 2009

detour342
  • 200 Answers

SOURCE: my printer wont print without a new color ink

take out the color cartridge and try again

Posted on Jul 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Canon PIXMA MX922 won't print black text


Is it out of color ink? It will not print true black if you do not have ALL print cartridges working.

Jul 10, 2016 | Canon Office Equipment & Supplies

1 Answer

Pc921 copies are light despite setting and plenty of ink


May need the optics cleaned or a new cartridge or both.

Feb 18, 2015 | Canon PC-920 Black and White Copier

1 Answer

Trying to print documents, white background with black typed words. Problem I have is the printed documents have solid dark blue and solid black ink and the words don't show.


Are the ink cartridges installed in the correct colour order?
Have you printed a test page through the printer's own control panel? What was the result?
Open a new document, using the default settings. Key in some test text. Try printing. What is printed?

Jan 06, 2015 | HP Office Equipment & Supplies

2 Answers

Does not print dark enough to read. Changed toner and adjusted print darkness feature. Still does not work. Any idea what to do?


Hi

When printing, just adjust the PRINT QUALITY to PHOTO because I believe your print quality is set to TEXT. I am sure it will print move darker than before.

I hope it helps you solve your problem.

Regards

Feb 15, 2011 | HP LaserJet 3030 All-In-One Printer

2 Answers

Photo black ink runs out b4 black on HP Photosmart C6380 printer


The black ink cartridge is larger than the photo black cartridge and black is used in photos to make the darker colors. Black text takes much less ink per page.

Jul 17, 2010 | HP Photosmart C6380 All-In-One InkJet...

3 Answers

Canon IP4300 - the two black ink cartridges


No!

The large cartridge is used for text only printing.
The smaller black cartridge is used for black in images such as pictures.

You have a "C (cyan) M (magenta) Y (yellow) and B (black) color system. This actually saves the color inks for you. If the Black was not there, you would need to make a composite black from the color inks.

Don

Jan 31, 2010 | Canon PIXMA iP4300 InkJet Photo Printer

2 Answers

Hp psc 1210xi- the black ink cartridge appears to be out- i have a good color cartridge-how do I get the error off of my printer and print with my color cartridge?


  1. Take out the black cartridge once you've determined that you are completely out of black ink. You'll have to rely on the dark hues from the color cartridge to print in black.
  2. Adjust the printer software settings. Once you take out the black cartridge, your printer's software will typically warn you that you are missing a cartridge. Follow the instructions for your printer to allow the printer to print without the black cartridge. Then set the printer to print in black and white, not color. This overrides the black cartridge and allows the printer to access the dark hues of the color cartridge.
  3. Print a test page to ensure that your printer now prints black using the color cartridge.
  4. Print your documents. Bear in mind that your documents may not appear as black as normal. Still, they should be dark enough to pass for black, depending on how much color ink you have and the strength grade of the ink.

Sep 29, 2009 | HP Office Equipment & Supplies

1 Answer

The black is not printing dark enough. It shows it


it is problem your printer black cartridge
you change it or
technicaly you drop your black cartridge in water withen two days after tow days you dry black cartridge and clean head printer maintai nence software then solve your problem

Jul 30, 2009 | HP DeskJet 5550 InkJet Printer

Not finding what you are looking for?
Kodak HERO 7.1 PRINTER Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5125 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...