Question about Washing Machines
My whirlpool washing machine takes a very long time to fill for a cold wash ( a few hours!) and it is frustrating. The hot washes are fast, the water comes out very fast and hot. Both valves are open. This started happening a few months ago. What is the problem?
Thanks for your help!
Hi, you have a blockage on the cold side of your inlet valve, take the hose off on cold side of the valve and inspect screen..You may find some debris. If no debris is found you may have a bad valve..your going to need to replace it...if you have any questions please don't hesitate to contact
Posted on Jun 23, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 12, 2011 | Washing Machines
Jun 16, 2011 | Whirlpool Ultimate Care II LSQ9564J Top...
Jun 01, 2011 | Whirlpool Duet GHW9150P Front Load Washer
If your washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips...
Washing Machine Problems No Water
Washing Machine Fix Washing Machine No Water
May 08, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...
Feb 22, 2011 | Whirlpool Washing Machines
Oct 01, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Sep 28, 2010 | Whirlpool LSR5132PQ Top Load Washer
Sep 18, 2010 | Washing Machines
Sep 08, 2010 | Whirlpool Duet GHW9150P Front Load Washer
139 people viewed this question
Usually answered in minutes!