Question about Zanussi ZWD1470W Front Load Washer / Dryer

1 Answer

Err message whatever I press!

Did a load of laundry normally this morning, this afternoon it has decided that whatever button I press it just says "err" as if I've selected a wrong program combo! Pressing every single button (apart from on/off) results in the same message. Even pressing and holding the reset button results in the same "err" message...nurse with uniforms to wash here...help!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 113 Answers

Try unplugging the washer, wait about 10 minutes and plug it back in. Maybe this will reboot your washer. Since most new washers are digital and maybe this will help. Good luck

Posted on May 13, 2014

  • Katy
    Katy May 13, 2014

    Thanks, good idea! The plug is totally inaccessible to me so I'm going to have to turn off the circuit at the fusebox and hope for the best!

  • Katy
    Katy May 13, 2014

    had the power off for nearly 30 minutes and it's still doing the same thing :(

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 249 Answers

SOURCE: Allows selection of program, but will not start wash

would it be the door interlock???EIRE

Posted on Dec 02, 2007

  • 1294 Answers

SOURCE: Zanussi err problem

Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it. Snaking out your standpipe would be good too.

Rate me pl.....if helped.

Posted on Jan 06, 2008

  • 2 Answers

SOURCE: Zanussi zwf1237w washing machine

Won't spin at full speed. It just goes around slowly.

Posted on Mar 06, 2008

  • 1294 Answers

SOURCE: wont start on any program

Close your faucet valve & unscrew your hoses to check screens on hoses & machine. Clean out well. Water from faucet shd be in good pressure. Refit, check for leaks. If this is not the problem change your inlet valve, it is easily done.

& rate me pl.

Posted on May 10, 2008

  • 8 Answers

SOURCE: Zanussi zwf1237w washing machine

I had the same problem my 3 yr old had been playing with the buttons and the whole thing just locked up and displayed ERR no amount of unplugging turning off would fix it.

Till ...........

  • Take off the top
  • Unscrew front panel and remove,
  • Then remove circuit board from panel,
  • Desolder the square battery,
  • Leave to stand around 15 Min's, (would recomend longer to be sure)
  • Re-solder Battery refit circuit board and refit panel.

This discharges the program memory chip and resets to default.

Hope this helps it's not so hard as it sounds just take care with the battery. DON'T put to much heat on it use a screwdriver on the small connections to act as a heatsink.


Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn off emergency blinkers


Good morning, afternoon, evening, or night; whatever time of day you are viewing this post. By emergency blinkers, you mean your hazard lights right? Just press the button at the lower-center of your dashboard with the triangle icon. It is surrounded by the door locking and unlocking buttons.

Mar 12, 2014 | 2009 Smart fortwo

1 Answer

My midland noaa weather alert is stuck in the tone mode and will not go to voice


Good morning, afternoon, evening or night; whatever time of day you you are viewing this solution posting. Thank you for choosing FixYa to assist you with your problem. Your problem is that your weather radio's 'Alert Type' setting is set on Tone and will not change to Voice. To change your 'Alert Type' setting...

1. Press Menu.
2. Press the down arrow button until you see 'ALT TYPE' displayed on your screen.
3. Press Select.
4. Press the down arrow directional button. You should see 'VOICE' on your screen.
5. Repeat step #3.
6. Repeat step #1 to exit.

You should now be able to receive voice alerts on your radio.Thank you for choosing FixYa as your one-stop solution spot for problems, questions, concerns and requests. Visit our website again in the future, and have a good morning, afternoon, evening or night; whatever time of day you are viewing this solution post.

May 28, 2011 | Midland WR-100 Weather/RDS Radio

1 Answer

Where is the power button?


Good morning, afternoon, evening or night; whatever time of day you are viewing this solution post. Thank you for choosing FixYa to assist you with your question. You want to know where the power button is on the Memorex MD6451R Personal CD Player? Well to answer your question, the power button is Play/Pause button. Insert a CD into the compartment, close the top and press the Play/Pause button (whether on the CD player or the wired inline remote). I hope this turns on your CD player and thank you for choosing FixYa to answer your question. Have a good morning, afternoon, evening or night; whatever time of day you are viewing this solution post.

May 28, 2011 | Memorex MD6451R Personal CD Player

1 Answer

How do unsnooze the gc-823


Good morning, afternoon, evening or night; whatever time of day you are viewing this. Thank you for choosing FixYa to solve your problem. You want to find out how to unsnooze the Element Electronics GC-823 MP3 Player? Try holding the play button for a few seconds. Hopefully this will get you player out of snooze mode.Thank you for choosing FixYa as your one-stop solution spot for your problems. Come back and visit our site again soon. Have a good morning, afternoon, evening or night; whatever time of day you are viewing this.

May 12, 2011 | Element Electronics GC823 MP3 Player

1 Answer

HOW DO U TURN IT OFF?


Good morning, afternoon, evening or night; whatever time of day you are viewing this solution post. Thank you for choosing FixYa to assist you with your problem. You want to know how to turn off your Philips GoGear ViBE Digital Media Player? Just slide and hold the power button that looks like this- ('), for two seconds. Thank you for choosing FixYa as your one-stop solution spot for all of your problems. Visit our website again the next time you need technical assistance. Once again thank you and have a good morning, afternoon, evening or night; whatever time of day you are viewing this.

May 10, 2011 | Philips GoGear ViBE Digital Media Player

1 Answer

I have a Midland WR-100. The stations don't work, it just rings. Can I fix this?


Good morning, afternoon, evening or night; whatever time you're reading this. Your complaint is that the stations on your radio do not work and it just rings for no apparent reason? The possible cause of this could be your alert setting. Your alert setting may be set on TONE. When this setting is activated, a ringing sound will be played on your radio for 5 minutes or until any button other than the Weather/Snooze button, on your radio is pressed. If this is the cause to your problem, you need to change your alert type setting. Here are the steps to doing this task...
  1. Press the MENU button.
  2. Use the directional up button until "ALT TYPE" is showing on your screen.
  3. Press SELECT
  4. Using the directional up or down buttons, choose DISPLAY or VOICE.
  5. When this is done, press SELECT.
  6. Press the directional up button until "ALT TEST" is shown on the screen.
  7. Test your alert type to find out if you'd prefer this setting.
  8. If this setting is preferred,press SELECT and MENU to exit. If you prefer to choose another setting, press MENU, then the directional down button until "ALT TYPE" is showing on your screen. Repeat steps 3 through 8.
I hope this solves your problem. Reply back if it doesn't. Thank you for choosing FixYa as your one-stop solution spot for your problem. Make sure to read our Tips & How-to page for this product. Have a good morning, afternoon, evening or night; whatever time you're reading this solution.

Apr 19, 2011 | Midland WR-100 Weather/RDS Radio

1 Answer

Have a kenmore front load washer and shows pau 45 in the display. Whatever button i press shows err cannot do anything with the machine.


LOC means it thinks the control panel is locked.
This gives the ERR indication when you push the buttons.
To unlock it you need to hold down the Options and Select buttons together until it reacts.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
%^$@

Jul 10, 2010 | Kenmore 46462 Front Load Washer

3 Answers

Frigidaire front load, ERR LOC, washer won't run


Just had same problem. After removing boot/rubber gasket around opening, and replacing door lock assembly it still would not work giving the same ERR LOC message! Another site directed me to press the "Options" and "Select" buttons at the same time. BINGO! My husband was quite proud of me!

Jun 28, 2009 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Frigidaire (gallery series) err problem


Click on your model number (below FIXYA) on this website, & search. You will get a shortlist; click on your model, below the page u will get Manual/Guides. Click on the blue, you have your manual on line.
And dont forget to rate me on this great site.

Jan 23, 2008 | Frigidaire GLTF2940ES Front Load Washer

2 Answers

Kenmore Front Loader - LOC & Error Codes


You need to switch the machine off at the wall and leave it off for a few seconds. Open the door. Switch the machine back on again and close the door firmly. It should be o.k.

Aug 26, 2007 | Fisher and Paykel Fisher Paykel Intuitive...

Not finding what you are looking for?
Zanussi ZWD1470W Front Load Washer / Dryer Logo

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...