Question about Siemens Washing Machines

Open Question

I have a siemens washing mashine model WM2300 which has been working problem free for 10 years.....suddenly now, when starting any program and during any program the inside does not turn (I can manually turn both right and left with my hand inside the mashine). Program continues normally taking in and out water + soap. Please, help as the mashine is in my summer residence where there is no access to siemens technicians... Many thanks, Marie Molls

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1462 Answers

SOURCE: Wash starts it fills with water then stops and wont wash

problem may just be that drum is not turning so you think program is stopped. try cancelling and select spin program and see if you get spin

Posted on Apr 01, 2007

Ad
dazmaraz
  • 67 Answers

SOURCE: error message "test"

yhe washing machine has been put into test mode to get out of this mode you must press and hold down the On/Off and Start/Cancel buttons until "d off" is displayed that will get you out of the test mode

Posted on Jun 25, 2007

Timon90
  • 126 Answers

SOURCE: candy aquaviva 1000 es

Are you sure that this not is the cooldown phase of the mainwash? Most frontloaders have this feature.

Posted on Jan 24, 2008

  • 98 Answers

SOURCE: Bosch dishwasher timer freezing

There is a recall on the control board of many of these models, butyour problem is likely not related. It sounds like a plugged drain system or a possible bad drain pump. That's why you are hearing the pump running constantly. I have written a guide to help. It is here. Thanks!

Posted on Jul 19, 2009

aasc
  • 1606 Answers

SOURCE: water leaking during wash cycle. How do you get access to inside

I use a putty knife about 2" inward , between the top and the front panel on each side . Give a good hit on one side while slightly pulling the front panel forewafd . Then do the other side . The front panel tilts foreward and hinges on the bottom with tabs . Then lift to remove .

Posted on Aug 02, 2010

Testimonial: "I wish I had asked the question hours ago! Thanks."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I have WHIRLPOOL washing mashine model AWE 2214. Yesterday during squeezing, the masine stoped without noise, no indication buttons.I cheked everything, but the mashine no start. Please, help me!...


Go to www.washingmachine-manual.com/whirlpool-awe-2214.html for the handbook. Make a cup of coffee and have a read up. If that fails to help then its an engineer I'm afraid.
If you have a good diy friend have them check the belt drive if it has one? Be careful of electricity and water, they don't mix.

Jul 21, 2014 | Whirlpool Washing Machines

1 Answer

F:80. My new siemens washing mashine IQ700 shows F:80 at the end of the program with the alarm. I can\t open the door normal way. What does it mean? We installed the mashine yesterday.


It means that the machine register what's in there as too heavy.
Can't understand for the life of me why this error code isn't explained in the user guide, but that's just how it is.
To fix this, turn off the machine, make sure that you get out as much water as possible and then open the door manually by pulling the red plastic band to the right of the pump (remove lid first ofc), or you need a screwdriver or something like that on some models depending on the age of your product.
I do know that this answer comes a little too late, but browsing for answers myself, I had to dip into the old noggin of myself as a former White Goods Consultant and I figured it all out.
For future reference I therefor post it here anyway ;o)

Jun 23, 2012 | Siemens Washing Machines

2 Answers

I need an operating manual for Siemens HF87951 800 Watts Microwave Oven


Most major manufacturers supply manuals online so if you were to log on to the manufacturer's web site, you may be pleasantly surprised as usually, if available, one is able to download, by model number, Customer Instruction Manuals, Dealer Network for spare part supplies as required.

The information is normally free of charge.

I hope this helps.


Mar 12, 2011 | Siemens HF87951 800 Watts Microwave Oven

1 Answer

Siemens Siwamat c12 manual needed


This site says they have the manual. I see it is not free, no idea how much they charge for manuals etc. Hope that will help you.

http://www.manualsnguides.com/search.php

Jul 17, 2009 | Siemens Washing Machines

1 Answer

Problem with spining during programs.


Try these solutions

I've just tested the water pressure pipe - pulled it up so that it was straight and that seemed to do it.

Jun 18, 2009 | Washing Machines

1 Answer

Model no wa80b3 samsung washing mashine


My washing machine is Samsung Top loading Model WA80B3, the problem is that the water inlet valve is continuously working all the time during the washing cycle and it does not stop automatically, so I have to run additional drying cycle after washing cycle and after closing the water supply manually

May 02, 2009 | Washing Machines

1 Answer

Water comes out from the bottom of the mashine


Pressure switch failed.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 16, 2009 | Washing Machines

1 Answer

The Start/pause/cancel light keeps flashing. processes don't start. am told the programme selection board has had it. washing mashine just over a year old. any ideas about its problem?


hello sendid,
welcome,
Please send me the MODEL #
Try to unplug the washer for 10 minutes and then see if it reset the system.
Who told you about the program selection board?
Huuum
waiting your response

Oct 16, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1467 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Siemens Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...