Question about Konica Minolta bizhub 350 All-In-One Laser Printer

2 Answers

How do I adjust the MTu size on a Konica Minolta bizhub 7255?

Posted by on

  • jtr6618 Jun 23, 2009

    It is not on the network config. page.




2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 122 Answers

Could you please advise on excatly why you are trying to change the MTU size?

MTU sizes are inherent properties of physical network interfaces. The MTU for ethernet is 1500 bytes. Some types of networks (like Token Ring) have larger MTUs, and some types have smaller MTUs, but the values are fixed for each physical technology. You Bizhub will automatically adjust depending on the nature of your network, which is probably Ethernet.

TCP/IP can be configured with a maximum packet size, a parameter independent of the physical layer MTU over which TCP/IP runs. Unfortunately, many network devices use the terms interchangeably. On most routers, the parameter called MTU is in fact the maximum TCP packet size and not the physical MTU.

Performance problems may occur if the TCP "MTU" setting on your router differs from the setting on the Bizhub. Is this what you are trying to rectify?

If so, and you have a managed router, you can make he appropriate changes at the router to match the default MTU of 1500 on your Bizhub. (There is usually no need to ever change this, as this all happens automatically on devices manufactured within the last 7 years or so)

If this is not your reason, could you please eloborate on why you are trying to change the MTU? Changing the MTU requires setting the device into service mode. The steps for this is in your service manual, or can be obtained by contacting Konica-Minolta.

Posted on Jun 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Konica Minolta Master
  • 13,433 Answers

It should be in the network settings on your bizhub.

Posted on Jun 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can this part for the printer be purchsed ? konica minolta bizhub 160

Except you don't say what 'this part' is :>)

Never mind. Here you go. Or look in Yellow Pages for a technician.

  • Konica Minolta bizhub 160 Supplies and Parts (All) > ... > Konica Minolta > bizhub 160 Konica Minolta bizhub 160 Supplies and Parts (All) for less. Free shipping on orders over $75.00!
  • Konica Minolta Bizhub 160 Toner, Parts, Supplies, and ... Additional Info Konica Minolta Bizhub 160 is a Digital Printer and Copier which was introduced February 10, 2012. Suggested Retail Price:$1,029
  • images of konica minolta bizhub 160 parts th?id=oip.mcd31c057681b6e2e393bc136df5885ddo0&w=140&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2th?id=oip.m850c92a4f48e9107608f3f81e06b2feeo0&w=99&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2th?id=oip.mdb0ced5306197a197806530dbb355967o0&w=74&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2th?id=oip.mb7d2a296bf50d1a0bb42098505ce2c61o0&w=133&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2th?id=oip.maedc8ec17eba695445679a648922e7e3o0&w=70&h=105&c=7&rs=1&qlt=90&pid=3.1&rm=2 See more images of konica minolta bizhub 160 parts
  • Konica-Minolta bizhub 160 160f 161 161f Parts Manual BRAND: KONICA-MINOLTA: BRANDSKU: No: TYPES: Parts_Manual: SIZE: 1.49M: PAGES: 35: FORMAT: PDF: LANGUAGE: English: QUALITY: High resolution: ...
  • Konica Minolta Bizhub 160 Printer / Copier Parts & Supplies Save big on Bizhub 160. We offer the lowest prices and highest quality, with free shipping on any orders over $100!
  • Konica Minolta bizhub 160 Parts Guide (160_PARTS) Konica Minolta bizhub 160 Parts Guide; PN: 160_PARTS
  • Apr 01, 2016 | Konica Minolta Office Equipment & Supplies

    1 Answer

    Konica minolta 7255

    Something went wrong with the machines image control board. Check all connectors reseat each and very one pull each out separately and check for a bent pin. Time consuming but the board could cost $1000.00? give or take if you can find one.

    May 23, 2014 | Konica Minolta 7255 Lower Fuser Picker...

    1 Answer

    Konica minolta bizhub c654 pixelated

    When was the last the Gradation Adjustment was run along with stabilization? Run those both should help

    Apr 25, 2014 | Genuine Konica Minolta Konica Minolta...

    1 Answer

    Error code 7255

    no such code for the model c203

    Mar 03, 2014 | Konica Minolta Bizhub c203 Copier

    5 Answers

    How can I correct SC29-04 on Konica 7255?

    The sensor is located on the left side of the drum cartridge it is a sensor that is covered with a white cover to the rear of the drum you must remove the drum to see it clean with cloth not a vacuum cleaner Static from vacuum can destroy it. The clear glass sensor is for paper jams! Located in the middle of the cartridge. Mite also want to know when the last 250K copies PM was done?

    Nov 28, 2012 | Konica Minolta TN601K Toner for 7155,...

    1 Answer

    Our bizhub 180 is showing prn err

    First of all check the error.what error is appearing on the display.if it is about the paper size error then check the paper size in the tray. then adjust the paper size from your computer where you installed the driver, adjust the paper size from printing preferences by right clicking on the printer icon.then in paper size tab you can adjust the paper size. paper size must be the same as in the tray.

    Sep 16, 2010 | Konica Minolta bizhub 180 All-In-One...

    1 Answer

    How do I install a bizhub 7255 as a local or network printer on a windows xp wireless network

    You need a Wireless-Ethernet bridge. That device does NOT have a wireless network card.

    Jan 03, 2010 | Konica Minolta Office Equipment & Supplies

    Not finding what you are looking for?
    Konica Minolta bizhub 350 All-In-One Laser Printer Logo

    Related Topics:

    352 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Konica Minolta Office Equipment & Supplies Experts

    Norman  J Weimar Jr
    Norman J Weimar Jr

    Level 3 Expert

    6161 Answers


    Level 2 Expert

    108 Answers

    David Burkhart
    David Burkhart

    Level 2 Expert

    210 Answers

    Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides