Question about Dmm Vision Fitness T9500 Treadmill

Open Question

Treadmil turns on but start button will not work how do I fix it?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I turn on says stuck button


reset the treadmill, follow this step and fix it. Merry Christmas
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.

    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Dec 17, 2013 | Exercise & Fitness

1 Answer

Rebok i run RE14301, plain blue screen. It was working until my son played with all of the buttons! We have tried turning it on and off and pressing the reset button but this does not seem to have worked


follow this steps and fix it. God bless you


Instructions 1.
    • 1
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Oct 15, 2013 | Exercise & Fitness

1 Answer

Golds Gym Treadmill motor will not start after sitting idle for about a year


see the video and fix it. However after you did this and the problem remain, you must test a) control board or b) replace the old board deck belt.

3_25_2013_5_51_40_pm.gif

Mar 24, 2013 | Golds Gym 450 Treadmill Drive Motor

1 Answer

My precore 9.43 starts to run then in 5 seconds turns itself off. Says ERROR- nothing more.


proceed according and fix it. God bless you

1 )Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.



  • 2

Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.

Jan 25, 2013 | Precor 9.4 Treadmill Motherboard Motor...

1 Answer

My Sole treadmill goes starts speeding up and there is no way to slow it down. I have to turn it off


RUN THE SOFTWARE CALIBRATION FOR EASY DIAGNOSTIC, TROUBLESHOOTING, AND FIX IT.
GOD BLESS YOU

Sep 22, 2012 | Exercise & Fitness

1 Answer

When I turn on the treadmill, the top console lights up, but the bottom half of the console won't work except for 2 buttons. The START button will start the treadmill at 1 mph (stop will not...


First of all you need a Surge protector, you can get one from Nordictrack.com, it is on sale. Secondly, unplug the treadmill and leave it unplugged for at least 24 hours. Before you plug it back again, make sure you already have a surge protector on your outlet. Also make sure Trreadmill is the only load on this circuit. Plug it and try again. I had the same problem, and mine works this way. Some times, with dilrty power, the bit get set and the bottons stop working. Good Luck!

Jan 02, 2011 | Nordic Track NordicTrack Treadmill, A2550

3 Answers

Ifit treadmill will not incline but everything else works, how do I fix the incline


You may need to calibrate the incline. Do this with the following procedure.
Safety key out
press the stop and speed up buttons at the same time while inserting the safety key. (you are now in diagnostics)
press the stop button one time only.
now press the incline up button (incline motor should start moving up)
incline will go up to the top and then all the way to the bottom. when it gets done you can remove the key. Reinsert the key and you should be operating normally.
Good luck Tim

Nov 23, 2009 | Proform Quick Burn Pro Treadmill with 12...

1 Answer

I plugged in my Pro-Form 730cs treadmill and it won't start.


My i FIT treadmill won't turn on. Is there a reset button somewhere?

Aug 28, 2009 | Proform Quick Burn Pro Treadmill with 12...

1 Answer

Buttons Froze during workout, now none of them work


It sounds like you just need some calibration. To calibrate incline, turn power on press press any incline buttons, as the incline try to change unplug the key. Now re-nsert key and incline will self calibrate,

Aug 23, 2009 | Nordic Track NordicTrack Treadmill, A2550

Not finding what you are looking for?
Dmm Vision Fitness T9500 Treadmill Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dmm Exercise & Fitness Experts

fretlessbass
fretlessbass

Level 1 Expert

22 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Techmotionusa.com
Techmotionusa.com

Level 2 Expert

163 Answers

Are you a Dmm Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...