Question about Zanussi 24 in. DE6850 Free-standing Dishwasher

Open Question

Where is the main board in zanussi DE6850 - Zanussi 24 in. DE6850 Free-standing Dishwasher

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 114 Answers

SOURCE: where is the heating element on a zanussi de6850

remove RHS panel and you will see it bottom right. looks like a round cylinder with wires going into it.

if not heating worth looking at main board as wel for a broken solder joint on heater relay. bit of solder will sort this

Posted on Oct 19, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the heating element on a zanussi de6850 dishwasher


remove RHS panel and you will see it bottom right. looks like a round cylinder with wires going into it.

if not heating worth looking at main board as wel for a broken solder joint on heater relay. bit of solder will sort this

Oct 19, 2010 | Zanussi 24 in. DE6850 Free-standing...

1 Answer

I have a Zanussi DE6850 free-standing dishwasher. Have just put on a 65 degree programme. After approximately 1 minute the machine has stopped functioning and the top two lights are flashing and water...


Hello,
You seem to have a blockage,have you checked the filters lately.Also check the drain hose and the pipe that the drain hose goes into,if they are clear then the blockage is down in the bottom of the dishwasher in the pipes or the drain pump.

Hope this helps.

May 21, 2010 | Zanussi 24 in. DE6850 Free-standing...

1 Answer

Water not getting hot


Start checking the element. (assuming you have a tester).If reading is good,(approx. 20-40 ohms).then check for a reset switch. Normall a red push to resed button or if there is continuity.. From there it can only be the board which outputs the heater voltage.

Sep 19, 2009 | Zanussi 24 in. DE6850 Free-standing...

3 Answers

ZANUSSI DE6855 DISHWASHER - NO HEAT FOR WASHING OR DRYING


Make sure you unplug before you start. I had the same problem with a DE6850. The heater was ok. Metered at 25.ohms. Apparently, the relay on the control board mounted in the front door behind the switches is a common fault. Remove the screws around the top part of the door and you will be able to get at the control module. Resolder the connection. Zanussi reliability has been lost. Noel P31bf5e2.jpg

Apr 12, 2009 | Zanussi 24 in. DE6850 Free-standing...

1 Answer

Dishwasher was tipped and won't run


I have the same problem if you take off the tray below the front door and set a small blow heater in there it will dry the out the anti flood switch. It usally takes about 25 mins for the machine to start working again.

Feb 21, 2007 | Zanussi 24 in. DE6850 Free-standing...

Not finding what you are looking for?
Zanussi 24 in. DE6850 Free-standing Dishwasher Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Owen Barnes

Level 3 Expert

867 Answers

Paul Carew

Level 3 Expert

2557 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...