Question about Televison & Video

1 Answer

When I press on the power button it starts and switches off.It takes an average of 10 tries to eventually switch on. I do not know how to open it to check if it is the switch whichy is faulty or simply a bad connection. Thanks for your help Ben benlsee@intnet.mu

Posted by on

  • benlsee Jun 23, 2009

    There is a misunderstanding here I was refering to my Asus laptop A2500.
    Thanks for any help.
    Regards
    Ben


  • benlsee Jun 23, 2009

    Sorry for this mistake.
    Asus Laptop series A2H model A2500H
    SN 37np047827
    hOPE YOU CAN HELP.
    tHANKS
    bEN



×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

Probably more than a switch problem. Id recommend getting a service manual for your tv.

look for it at
http://www.eserviceinfo.com/

http//www.manualsparadise.com

most of the service manuals show how its taken apart, some might only show diagrams etc and not related to taking the tv apart.

Posted on Jun 23, 2009

  • 1 more comment 
  • Ekse Jun 23, 2009

    Oh, you see you posted it under flat panel televisions.

    Can you send me the model of your asus laptop?




  • Ekse Jun 23, 2009

    Sorry I missed the model, I got it. nevermind the last request.

  • Ekse Jun 23, 2009

    here you can see how to get to the buttons on a2400, its a different model but close, generally these laptops open up the same way, whatever brand, its pretty straight forward process.

    http://members.iinet.net.au/~allanxxx/A2...




×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set ink level on canon mx-320 after refill?


Apparently the problem is that you are choosing to install (according to Canon), cheap, aftermarket ink cartridges rather than Canon ones. Therefore the machine is not recognizing them. Try this procedure, found on another forum, that was supplied by one of the cheapo ink companies. Who better to know how to fool the machines than them. If they want to sell these ink carts, they better know who to make them work!

U051 Error Correction procedure.

1- Switch off the Canon MX300 and disconnect the power cable.

2- While press and hold the power button, Connect the power cable to electric socket.

3- While pressing the power button, press the "Cancel/Stop" button (red button). (press TWICE che "stop\cancel" button)

4- Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says "idle".

5- Press ">" (next button) once "Shipping Mode 3? then Press the "OK" button. Press "OK" again for "without cleaning". A test page will print.

6- Open the cover, like you are about to change the cartridges.

7- Disconnect the power cable again without switch off the printer.

8- Take out the both cartridges.

9- Close the cover.

10- Connect the power cable and turn on the printer.

11- Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.

Jan 14, 2015 | Canon Black Pixma Mx 320 High Quality...

1 Answer

I did try: change fuse as first it was without any lights. Then checked sockets. It started again by itself. Then I reprogram it-switch off-turn on 90'C-press start button- switch on- keep pressing f


Try this reset, it may work:

-Turn Off power switch
-Select 90 degree washing
-Press and hold Start
-Turn ON power switch and keep pressed Start button 10 sec
-Depress Start button
-Turn Off power switch and turn On again and thats it...

Credit to original poster :)

Oct 19, 2012 | Washing Machines

1 Answer

Power


It could be because of your Switch Button, To find out the problem open the case and find out your switch connector wire which goes and connect to the motherboard. Now remove those wire and try shorting power switch connector with and metal or with screw driver. To short the power connector you need to find out the proper two pin on the mother board. after doing all this if you can switch on your computer at once then you know what is the problem. If not then just let me know.

Aug 10, 2012 | HP Pavilion Computers & Internet

1 Answer

How to reset canon mp258


Reset Canon MP258 Printer procedure:
1. Press power button / power switch
2. Plug cable power with holding power button
3. Press Reset button one, release power button and press reset button twice until control panel show "O".
4. Press "+" buttom, display changing from 0 to 1
5. Press Power Button again , Printer will be print 1 page
6. Open printer cover
7. Unplug power
8. Take out cartridge 810 and 811
9. Plug power
10 . Press power switch
11. Open scan cover
12. Insert cartridge 810, 811

Aug 02, 2011 | Canon Office Equipment & Supplies

1 Answer

How to reset mp258


1. Press power button / power switch

2. Plug cable power with holding power button

3. Press Reset button one, release power button and press reset button twice until control panel show "O".

4. Press "+" buttom, display changing from 0 to 1

5. Press Power Button again , Printer will be print 1 page

6. Open printer cover

7. Unplug power

8. Take out cartridge 810 and 811

9. Plug power

10 . Press power switch

11. Open scan cover

12. Insert cartridge 810, 811

Jun 14, 2011 | Canon Office Equipment & Supplies

2 Answers

How do I re set the cartridges after a refill on my Canon PIXMA MX320?


Hi there

Here How to Disabling Low Ink Level Notification for Canon IP and MP, the method to reset
Ink level notification:

1. Push “resume” for 5 seconds for canon For MPXXX you must enter to service
Mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0′
5. Push + change display from “0′ to “1′
6. Push colour button 2 times
7. Push Power switch again, Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again


Enter to service mode for canon MPXXX

With the printer powered off but connected to a power source, press the Power
Button while pressing and holding the Stop/ Reset button.
When the Power is lit, press the Stop/Reset button two times while pressing and
Holding the Power button.
When releasing the Power button and the Stop / Reset button (regardless of
Order), the printer will move into a service mode. (Waiting for menu selection)

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Apr 30, 2010 | Canon PIXMA MX310 All-In-One Printer

1 Answer

My printer reset button keeps flashing. i have switched it on and off and still does not work 1p3500


Hi there

Here How to Disabling Low Ink Level Notification for Canon IP and MP, the method to reset
Ink level notification:

1. Push “resume” for 5 seconds for canon For MPXXX you must enter to service
Mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0′
5. Push + change display from “0′ to “1′
6. Push colour button 2 times
7. Push Power switch again, Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again


Enter to service mode for canon MPXXX

With the printer powered off but connected to a power source, press the Power
Button while pressing and holding the Stop/ Reset button.
When the Power is lit, press the Stop/Reset button two times while pressing and
Holding the Power button.
When releasing the Power button and the Stop / Reset button (regardless of
Order), the printer will move into a service mode. (Waiting for menu selection)

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 20, 2010 | Canon PIXMA iP3500 Printer

3 Answers

Low ink warning not right. ink is full. What to correct warning?


According to the information on the website, you should be able to press the Stop/Reset switch for about 5 seconds to disable ink level monitoring on the empty cartridge.

Feb 20, 2010 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

5100


Hello there ok

Try
Here the Solution to reset the ink level for Canon Pixma MX300 follow this steps to reset the ink level in your canon MX300.

1. Switch off the Canon MX300 and disconnect the power cable.
2. While press and hold the power button, Connect the power cable to electric socket.
3. While pressing the power button, press the “Cancel/Stop” button (red button).
4. Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says “idle”.
5. Press “>” (next button) once “Shipping Mode 3′ then Press the “OK” button. Press “OK” again for “without cleaning”.
6. A test page will print.
7. Open the cover, like you are about to change the cartridges.
8. Disconnect the power cable again without switch off the printer.
9. Take out the both cartridges.
10. Close the cover.
11. Connect the power cable and turn on the printer.
12. Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks


Feb 07, 2010 | Canon MX300 Office All-In-One Printer

2 Answers

Canon mx300 not printing


Hi
It is ink low error U051

1. Disconnect the power cable
2. Connect it while holding down the power button
3. With the power button still down, press twice the "Cancel/Stop" red button
4. Release the power button
5. The prints turns into a kind of factory mode...(wait for about 10 seconds, utile it says "Idle")
6. Press the ">" (next to the "OK" button) once.” Shipping Mode 3"
7. Press the "OK" button.
8. Press "OK" again for "Without cleaning"
9. A test page will print.
10. Open the cover, like you are about to change the cartridges.
11. Disconnect the power cable again.
12. Take out both cartridges.
13. Close the cover.
14. Connect the power cable once again.
15. Turn the printer on.
16. Now just put the cartridges back...

Or try this

Here the Solution to reset the ink level for Canon Pixma MX300 follow this steps to reset the ink level in your canon MX300.
  1. Switch off the Canon MX300 and disconnect the power cable.
  2. While press and hold the power button, Connect the power cable to electric socket.
  3. While pressing the power button, press the “Cancel/Stop” button (red button).
  4. Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says “idle”.
  5. Press “>” (next button) once “Shipping Mode 3′ then Press the “OK” button. Press “OK” again for “without cleaning”.
  6. A test page will print.
  7. Open the cover, like you are about to change the cartridges.
  8. Disconnect the power cable again without switch off the printer.
  9. Take out the both cartridges.
  10. Close the cover.
  11. Connect the power cable and turn on the printer.
  12. Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 02, 2009 | Canon MX300 Office All-In-One Printer

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...