Question about Hampton Bay Dryers
I need to program it with a new remote
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
in your ceiling box should be three wires. a red goes to the three way switches, a black goes to the hot and the white is the neutral. the fan wires are black, blue and white. since you have a remote, connect the [fan] blue & black together with the [line] black. connect all white wires together. the remote will now ramp up your lights from off to full on and the fan remote will let you choose lo med high and off. just tape up the red wire in the box.
Posted on Aug 22, 2007
Hello burrow31. There maybe a switch located on the fan stating 'remote/manual'. Check your manual. Remove the battiers in your remote and short out the battery contact terminals. Reinstall the battiers, start the fan and after fan has reached set speed press & hold fan speed button for one second. Still no speed change contact the Mgfr. with model & serial #.
Posted on Oct 13, 2008
if you have the remote controll for both the fan and light you can have the controll on both the fan and light...
other wise it can't
Posted on Dec 08, 2008
SOURCE: remote controlled ceiling fan
unplug the fan then remove the batteries from the remote then plug the fan back in and, reinstall the batteries; this resets the fan control
Posted on Apr 22, 2009
The Remote (TRANSMITTER) control AND the RECEIVER must both be set to the same CODE in order for the REMOTE to operate the fan.
!!WARNING!! YOU ARE ABOUT TO ENTER HIGH VOLTAGE ELECTRICITY ZONE!!
The RECEIVER is located in the CANOPY, the part of the fan assembly next to the ceiling which is also called the Hanger Bracket.
At the bottom of the Canopy you will see what looks like a large flat washer. Rotate the washer counter-clock wise to release it.
Then rotate the Canopy counter-clock wise to release and lower it. You will see the RECEIVER, which will have a short antenna at one end, tucked in among the electrical wire and bracket. Simply pull the RECEIVER out and you will see the CODE switches. Remember to set both devices to the same CODE.
Good luck. :)
Posted on Apr 26, 2009
Tips for a great answer:
Nov 21, 2016 | Hampton Bay Dryers
Oct 05, 2016 | Hampton Bay Dryers
Jun 29, 2012 | Universal Remote Control Hampton Bay...
Sep 10, 2011 | Televison & Video
Aug 16, 2009 | Hunter 28156 Cote 54' d'Azur® Ceiling Fan
Jul 04, 2009 | Hampton Bay 52 In. White Redington...
May 19, 2009 | Hampton Bay 13087 70450 Carousel II...
Sep 13, 2008 | Universal Remote Control Hampton Bay...
Dec 23, 2007 | Hampton Bay 24750 Huntington III Ceiling...
Sep 11, 2007 | Hampton Bay 48670 Flemish Pewter Finish...
19 people viewed this question
Usually answered in minutes!