Question about Transcend TS1TSJ25M3 - StoreJet 25M3 1 TB 2.5 External

1 Answer

My transced hard disk is not being recognized by any computer and i just got it a few days back. i transferred a large number of files before, and am in a dilemma s to how to recover these, or atleast

Well, just my above question. i'v tired pushing it harder in the usb slot, putting loosely, blowing air into the disk, and all the usual stuff.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 258 Answers

Might be the usb cable - it usually is the simplest of issues and the cable because of the design on the micro usb connector is very fragile and is usually the first thing to go wrong - get another cable and try it first.

If it doesnt work then the usb circuit could be damaged so your only solution is to open up the case and take teh hard drive out and buy another usb case - there are loads on ebay for about five pounds - install the drive and test it or install the drive directly into your laptop or docking station.

Posted on May 13, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a Kingston Datatraveler 32 GB but when copying files of 5 GB or more I got a Message that the file destination on the datatraveler is too small


You might need a bigger drive ?
In the Microsoft Windows operating system, you can copy and paste 5 GB files as long as you have enough disk drive space. The disk drive to which you're pasting the file must be formatted using the New Technology File System (NTFS), which supports the copying and pasting of very large files.

Purchase a large capacity USB external hard disk drive from a reputable vendor. Make sure that the hard disk drive is at least 100 GB. Connect the external hard disk drive to a spare USB port in your computer. Wait for the Windows operating system to recognize the hard disk drive. Double-click on the "Computer" icon on the Windows Desktop, after which a window will appear listing all of your disk drives. Establish the letter of the new hard disk drive you have just installed. For the purpose of this article, the drive letter is assumed to be "E." Right-click on drive "E," click on "Format," change the file system to "NTFS," then click on the "Start" button. Wait for the process to complete. Click on the 5 GB+ file to select it, then press "Ctrl" + "C" on your keyboard to copy the file to the Windows Clipboard. Click on the "Computer" icon on the Windows Desktop, then double-click on the "E" drive. This will open the root folder of the hard disk drive in the same window. Press "Ctrl" + "V" on your keyboard to paste the 5 GB+ file from the Windows Clipboard to the new hard disk drive. Wait for the process to complete, which will take several minutes.
File transfer software http://www.filebuzz.com/findsoftware/High_Speed_File_Transfer/1.html http://download.cnet.com/Fast-File-Saw-Joiner/3000-2248_4-10388628.html When e-mailing or archiving huge files, it sometimes helps to cut them into smaller pieces. Fast File Saw & Joiner does exactly that, and puts the pieces back together, too.

Mar 02, 2013 | Kingston DTIG3/32GB 32GB DataTraveler G3...

Tip

How back up your files (data) before doing system restore


<p>1. Use of pre-installed backup tools. Many computers have a backup software installed when you buy (including Time Machine backup and restore for Mac or Windows). These tools are designed to transfer files to various media they create on the computer hard drive or external hard drive, you can prevent a total loss of data is performed. When you open the utility, follow the onscreen instructions to complete the backup. <br /> <p><br /> <p>2. Back up important files on a USB stick or Memory Stick. Insert the stick into a USB port on your computer. Drag the selected files to the disk icon on the desktop (Mac) or PC (Windows) will appear. Flash drives and memory sticks are very mobile and can be stored in small spaces such as basements. Although they generally do not have a capacity of more than a few gigabytes (GB), they are large enough to store your important files. <br /> <p><br /> <p>3. Enter an external hard drive. These external hard drives usually have a very large capacity and can therefore keep most or all files on a disk. Connect the external hard drive via a USB port. You can drag and drop files on your hard disk or use it as a means of backup using a backup utility installed. <br /> <p><br /> <p>4. Burn your important files on a CD-R or DVD-R. an entire hard disk backup can be many slices, so this option is ideal if you want large media files or documents for easy access later. Insert the CD into the CD-ROM and follow the instructions on the screen (for Windows and Mac) to back up and store files. <br /> <p><br /> <p>5. Upload files for storage in the cloud. Services in the Internet cloud storage (like Mozy and drop-down box) are great ways to backup files to the internet access from any Internet enabled device. Important files with sensitive information may only be attached to a back-up cloud services such as Mozy. Clouds, Drop box is ideal for backing up photos, videos and other files less sensitive.<br />

on Jun 21, 2011 | Computers & Internet

1 Answer

My Hitachi Touro 4TB external hard drive get stuck every time I try to transfer large files. How do I fix that? The format is NTFS and the files are 4g and up.



External hard drives are popular portable storage devices because they allow you to back up files such as documents, music and videos, and transfer files from one computer to another. While external hard drives vary in storage capacity, they are ideal for storing large files such as videos and animations. Files of this nature consume volumes of hard drive and memory space and are best stored in external hard drives. Whether you are using Windows or Mac OSX, transfer large memory consuming files to your external hard drive quickly and safely. Connect your external hard drive to your computer using the Firewire or USB cable that came with your portable storage device. If its transferring to slow the usb lead might be at fault or you might need a usb 3 card which makes data transfers much faster USB 3 card will provide more power when needed to the device to gain maximum throughput and conserve power when the device is connected but is idling http://blog.premiumusb.com/2010/09/usb-2-0-vs-usb-3-0/ these can be purchased on Ebay cheap and easy to install http://www.ebay.com.au/itm/PCI-e-PCI-Express-USB3-0-Card-new-NEC-720200AF1-chipset-/330608109325?pt=LH_DefaultDomain_0&hash=item4cf9c7670d for roughly $9 or $10free postage Power on your drive. Some external hard drives do not have a power button, because your computer powers them on automatically using the Firewire or USB cable. Click the Windows "Start" orb and click "Computer" or "My Computer" to launch Windows Explorer if you are using a Windows PC. You should see your external hard drive in the "Drives" section next to the "Local drive (C:)" drive. If you are using a Mac, you should see your external hard drive on the desktop. Double-click your external hard drive to open its hard disk window. If you have any content on your external hard drive, you should see it in this window. Drag files from your computer to your external hard disk's window. Because you are uploading large files, make sure their memory s do not exceed your drive's total memory. Your computer shows a status bar displaying the upload progress for each file you are transferring to your drive. The upload time varies depending on the of the file. Close the hard disk window when you finish uploading the files you want to store, and then click the "Safely Remove Hardware" icon on the System Tray next to the clock, if you are using Windows. The hardware removal window launches. Click your external hard drive's icon in the hardware removal window, and then click "Stop." When prompted, disconnect your external hard drive from your computer. Drag your external hard drive's icon from the desktop to the trash bin on the dock if you are using a Mac. Disconnect your drive from your computer. If you right click in the bottom toolbar select applications to see whats running at the time when transferring the files might be a virus or malware if you see something running that should not be select end now also processes to see what ticking over in the background

Hope this helps b>

b>

Dec 14, 2012 | Hitachi 4TB Touro Desk DX3 USB 3.0 Hard...

1 Answer

USB flash


What format is the drive

In the Microsoft Windows operating system, you can copy and paste 5 GB files as long as you have enough disk drive space. The disk drive to which you're pasting the file must be formatted using the New Technology File System (NTFS), which supports the copying and pasting of very large files.

Purchase a large capacity USB external hard disk drive from a reputable vendor. Make sure that the hard disk drive is at least 100 GB. Connect the external hard disk drive to a spare USB port in your computer. Wait for the Windows operating system to recognize the hard disk drive. Double-click on the "Computer" icon on the Windows Desktop, after which a window will appear listing all of your disk drives. Establish the letter of the new hard disk drive you have just installed. For the purpose of this article, the drive letter is assumed to be "E." Right-click on drive "E," click on "Format," change the file system to "NTFS," then click on the "Start" button. Wait for the process to complete. Click on the 5 GB+ file to select it, then press "Ctrl" + "C" on your keyboard to copy the file to the Windows Clipboard. Click on the "Computer" icon on the Windows Desktop, then double-click on the "E" drive. This will open the root folder of the hard disk drive in the same window. Press "Ctrl" + "V" on your keyboard to paste the 5 GB+ file from the Windows Clipboard to the new hard disk drive. Wait for the process to complete, which will take several minutes.
File transfer software http://www.filebuzz.com/findsoftware/High_Speed_File_Transfer/1.html http://download.cnet.com/Fast-File-Saw-Joiner/3000-2248_4-10388628.html When e-mailing or archiving huge files, it sometimes helps to cut them into smaller pieces. Fast File Saw & Joiner does exactly that, and puts the pieces back together, too.

Nov 26, 2012 | Kingston Digital DataTraveler 4000 8 GB...

1 Answer

File size limit for Buffalo HD 250 GB Hard Drive backup


The file is too large meaning that the size of that SINGLE file is too large. Your hard disk is probably formatted to a FAT32 file system, this results in a maximum of 4gb PER FILE maximum transfer. What you could do is archive it into a few parts using winrar and then moving it onto the disk, and when you need the file just extract the archive. Your problem isn't the total free space, it's the size of that file chunk.

Nov 03, 2012 | Buffalo Technology 250GB USB SATA 2.0 HD...

1 Answer

Computer stopped midway during a restore point and now cannot be restored or backed up or transfer files. Nothing is being recognized by the system. The restore disc is not being recognized by the drive...


reformat the hard drive and try to re-install the disk.. you hard drive it too full and cannot load temporary files that need to extract to install components and op sys. format the hard drive.
please rate this post.. thanks.

Dec 01, 2010 | Gateway 505GR PC Desktop

1 Answer

4gb Sandisk Cruzer USB drive on Windows XP SP3 When transferring over large files (1-3gb) I get an error message after about 3-4 minutes of transferring (roughly halfway through or near the end of...


WinXP uses its own driover for USB drives like this so as long as you have the latest updates installed that should be OK.

Make sure you are doing nothing else with the computer when transferring the file.

Check and make sure you have at least double the amount of free hard disk space as you are transferring.

Reformat the flash disk completely and tyhen run a checkdisk on it specifying to report and fix all errors.

Try defragmenting the hard drive so temporary files can be laid down contiguously.

See if there is a BIOS update for your motherboard.

May 17, 2010 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

2 Answers

I am trying to transfer large video files from one hard drive to a new Toshiba 500 GB and the computer states the ''Disk is full. Help!


Hi,
It looks like you have not formatted your New Toshiba hard disk:
So
1.Insert your hard disk, open My Computer
2.Right click on the Hard disk, click on Format, then under file system, click drop down box and choose NTFS; go down to format options and click Quick Format - Start
3.Try copying again
Give me a feedback!
Good Luck

Sep 16, 2009 | Computers & Internet

3 Answers

Cannot copy large files onto my WD passport


Your drive is probably in FAT32 format.  FAT32 has a 4GB file limit that is why your 5GB movie isn't saving.  You will have to format the drive in Mac OS file format (HFS) using Disk Utility.
Unfortunately once its in Mac format the drive will not be recognized by windows PCs.  What I do is have a program called macdrive installed on my windows computers so that they can access mac format hard drives.
i hope this helps!

Nov 13, 2008 | Western Digital Passport WDXML800UE...

1 Answer

Mother board or CpU Doesnt work. technician said I have a ghost inside my CPU!


verify your bios settings with regards to what the pc is expecting in way of hard drive.
Do you have the luxury of another hard drive that you can try on this pc ? - this will 'suggest' where the problem rests.
Make sure the lead is fully located on the back of hard drive.
If possible - change the lead for a 'known working' lead (Maybe from the computer that your hard drive was recognized in)

Aug 15, 2008 | Seagate (ST307504FPA1E3-RK) Motherboard

Not finding what you are looking for?
Transcend TS1TSJ25M3 - StoreJet 25M3 1 TB 2.5 External Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Transcend Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

Are you a Transcend Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...