Question about Brother Sewing Machines
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The top of the machine is not threaded correctly. First raise the presserfot then rethread the machine. Bottom looping is usually caused by a lack of top tension. There could allso be a bur on the hook.
Posted on Feb 23, 2008
Well, from the picture I see that your bobbin is a front load as opposed to a top load.. if you tilt the front panel down, you will see where the bobbin and casing goes. Put the bobbin in the casing with the thread pulling from the right hand side of the casing making sure the thread in guided into the small **** on the top edge of the casing.. On the back of the casing the will be a small tab. Pull that away from the casing and enter the casing in to the opening for the bobbin. It should snap into place when you release the little tab.
Posted on May 29, 2009
I am sorry to say that you may have been taken advantage of. There is
no such company as the Tailor Company, per say. There is a company in
Poland who produces sewing machines. They are very inexpensive
machines. There is a fellow in NJ who has bought up a large quantity of
these machines and put on his own name: Tailor. The only way he sells
these is by going across the country and advertising in hotel locations
that these machines are worth well over $600.00. If you let us know
what parts you need for the machine, we could possibly cross-reference
it and try to get it for you. Please let me know I can help you any
Posted on Aug 04, 2009
When you put back in the bobbin case, there is a little "knub" that sticks out with a flat spot on the right (on the top side of it) that you need to ensure it rests gently to the left of the position finger bracket (silver metal piece, in the square of the bobbin case area its on the right closest to you).
When you put in initially, it was probably twisted clockwise and there was a gap between the knub and the position finger bracket and when you put the needle plate on in jams that bobbin case in that position and the needle just takes chunks out of it..
You might need a new bobbin case, try sanding out the needle marks with sandpaper.
Posted on Jun 06, 2010
Tips for a great answer:
Jan 05, 2018 | Brother Sewing Machines
Aug 31, 2017 | Brother Sewing Machines
Oct 02, 2014 | Brother Sewing Machines
Sep 21, 2014 | Brother Sewing Machines
Jul 09, 2014 | Singer Sewing Machines
Oct 08, 2013 | Sewing Machines
Jan 03, 2013 | Sewing Machines
Apr 29, 2012 | Brother Sewing Machines
22 people viewed this question
Usually answered in minutes!