Question about Kodak EASYSHARE Plus Series 3 Thermal Photo Printer

1 Answer

Kodak easyshare plus series 3

Down loading from the kodak easyshare program on the computer back to the docking/camera

Posted by on

1 Answer

Re: kodak easyshare plus series 3

Easy share printer series 3 won't pull the paper through.

Posted on Feb 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Need to download manual for kodak easy share printer dock series 3

The manual for a Kodak EasyShare printer dock series 3 can be found here:

Jul 17, 2011 | Kodak EasyShare Printer Dock Series 3

1 Answer

My Kodak EasyShare printer dock Series 3 only prints 1/2 of the picture. It has always worked fine before.


one way or the other, someone must have change some settings on the Kodak EasyShare printer unknowing to you.

Since you do not know want was pressed to have caused this, the it would be better if you reset the printer. resetting will put the printer back to its default state. This will make the printer work fine as it has been doing before.

Or uninstall and reinstall the printer drivers. That is, detach the printer cord from your computer, uninstall the Kodak EasyShare printer dock Series 3 software, restart your computer and reinstall the software back just as you did when you first installed the printer to your computer.

This will help to rectify this problem.

Good luck.

Apr 12, 2010 | Kodak EasyShare Thermal Photo Printer

1 Answer

Where can I get the paper loading tray for the dock for C533


You may visit or call 1.800.235.6325



Sep 25, 2009 | Kodak EASYSHARE Plus Series 3 Thermal...

1 Answer

Kodak series 3 printer dock

The roller is dirty, clean first with rubbing alcohol or witch hazel with a cotton swab, try that

Feb 26, 2008 | Kodak EASYSHARE Plus Series 3 Thermal...

1 Answer

Series 3 Printer Not Printing Full Image

unplug power cord. Then hold down the transfer key and the left arrow button at same time and plug power cord back in.

Feb 10, 2008 | Kodak EASYSHARE Printer Dock Thermal Photo

1 Answer

Dock series 3

connectivity, connectivity
Is it connected to the \PC?
is the cord connected
is there damage to any cords?
Are the drivers installed for the printer dock/and Camera

check your usb drivers on the PC if they don't work you may need to upload new PC drivers, and cam/dock drivers

do you have permissions to add hardware to your PC

Nov 04, 2007 | Kodak EASYSHARE Plus Series 3 Thermal...

1 Answer

Kodak printer dock series 3

make sure the external card is activated, and make sure the pics reside on your pc, if you are trying to transport directly from an outside web source to the camera you'll just be confusing the computer. It may have worked at one time (luckily I may add) but by now the drivers are so corrupt that the process has fallen null. Otherwise reinstall the dock drivers to transfer the pics from a safe place on your PC to your Camera only. Good Luck!

Nov 04, 2007 | Kodak EASYSHARE Plus Series 3 Thermal...

1 Answer


the jack that is affixed to the board has already been damaged beyond repair, which means that if it were ripped out the odds of micro soldering those connections are not likely, (I've tried similar on cell phones they us a chemical soldering method and precision heating to make the connection, bet bet is to find a camera connection for the camera and transfer pics to the cam to print on the dock. Good Luck

Mar 17, 2007 | Kodak EASYSHARE Plus Series 3 Thermal...

Not finding what you are looking for?
Kodak EASYSHARE Plus Series 3 Thermal Photo Printer Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts


Level 3 Expert

18257 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides