Question about Kodak EASYSHARE Plus Series 3 Thermal Photo Printer

1 Answer

Kodak printer dock series 3

Can't transfer pics from my pc @ kodak online back to my camera to print them from my dock

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers
Re: kodak printer dock series 3

Make sure the external card is activated, and make sure the pics reside on your pc, if you are trying to transport directly from an outside web source to the camera you'll just be confusing the computer. It may have worked at one time (luckily I may add) but by now the drivers are so corrupt that the process has fallen null. Otherwise reinstall the dock drivers to transfer the pics from a safe place on your PC to your Camera only. Good Luck!

Posted on Jul 07, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Kodak easy share printer dock 3

sounds like its only receiving half the data. try these step... uninstall printer from your device... reinstall printer to device... if youre using a smartphone or tablet, switch to a pc... press and hold the cancel button on the printer... turn it off for 60 seconds then power it... run the nozzle cleaner function, then try again

Jul 05, 2016 | Kodak EasyShare Printer Dock Series 3

1 Answer

My Kodak Easy Share Printer Dock series 3 only prints half a page

Hello, try this and let me know.
Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.

Feb 03, 2011 | Kodak EasyShare Printer Dock Series 3

1 Answer

Kodak printer dock series3 can't be used with a pc. it can only be used with a camera


the Kodak Printer dock system is used only with Camera, However you can connect the Camera on the dock and connect the Camera to the PC to work.


* Please rate this solution with Thumbs up and Testimony to help us improve providing support

Jan 11, 2011 | Kodak EasyShare Printer Dock Series 3

1 Answer

New camera wont fit on the printer dock!Connection to large for c

Printer is only compatible with KODAK EASYSHARE-ONE, C***, P, V, and Z Series Digital Cameras

Aug 09, 2009 | Kodak EASYSHARE G610 Thermal Printer

1 Answer

Series 3 Printer Not Printing Full Image

unplug power cord. Then hold down the transfer key and the left arrow button at same time and plug power cord back in.

Feb 10, 2008 | Kodak EASYSHARE Printer Dock Thermal Photo

1 Answer

Dock series 3

connectivity, connectivity
Is it connected to the \PC?
is the cord connected
is there damage to any cords?
Are the drivers installed for the printer dock/and Camera

check your usb drivers on the PC if they don't work you may need to upload new PC drivers, and cam/dock drivers

do you have permissions to add hardware to your PC

Nov 04, 2007 | Kodak EASYSHARE Plus Series 3 Thermal...

1 Answer

Lines in prints

Lines in printouts indicate lots of issues. Clogged printheads...even in a new printer, damaged cartridge, or air bubbles in ink. Take out the cartridges, clean the heads and the docks printhead, replace and try again. If no success, try standinf the cartidges upside down on wet paper towel, and bleed ink a little. This eliminates air bubbles. Try printing now. Clean heads with printer program too. If still no success, follow consumer rights which says you are entitled to a product doing what it says it should for a reasonable amount of time (if it turns out to be a faulty dock. Try a new cartridge too after claening to eliminate damaged cartridge.

Mar 29, 2007 | Kodak Dock Series 3 Laser Photo Printer

1 Answer


the jack that is affixed to the board has already been damaged beyond repair, which means that if it were ripped out the odds of micro soldering those connections are not likely, (I've tried similar on cell phones they us a chemical soldering method and precision heating to make the connection, bet bet is to find a camera connection for the camera and transfer pics to the cam to print on the dock. Good Luck

Mar 17, 2007 | Kodak EASYSHARE Plus Series 3 Thermal...

Not finding what you are looking for?
Kodak EASYSHARE Plus Series 3 Thermal Photo Printer Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts


Level 3 Expert

18258 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides